Passive remote sensing is a practical and widely used method for bathymetry mapping in shallow rivers. However, the accuracy of this approach is limited because of different riverbed types; therefore, it is important to classify the riverbed types for improving bathymetry mapping accuracy and providing useful information for fluvial systems. In this study, we proposed a Gaussian mixture model (GMM)-based clustering method that utilizes hyperspectral imagery to classify riverbed types without sampling the bed material. We evaluated the proposed method in two shallow streams with different bed mixture conditions: (i) sand and vegetation and (ii) sand and moss-covered sand. The results showed that the GMM method accurately identified the spectral variability caused by diverse riverbed materials, enabling the precise classification of riverbed types. Moreover, by combining the GMM method with optimal band ratio analysis, we observed a reduction in error for the bathymetry mapping results by approximately 0.05 to 0.07 m. While our proposed method exhibits potential applications in various river environments, further research is needed to validate its effectiveness in classifying more complex riverbed types and conditions. Overall, our study findings suggest that the GMM-based clustering method using hyperspectral imagery is a promising tool for improving bathymetry mapping accuracy and classifying riverbed types in shallow rivers.

The occurrence of natural disasters as a consequence of accidental hazardous chemical spills remains a concern. The inadequate, or delayed, initial response may fail to mitigate their impact; hence, imminent monitoring of responses in the initial stage is critical. Classical contact-type measurement methods, however, sometimes miss solvent chemicals and invoke risks for operators during field operation. Remote sensing methods are an alternative method as non-contact, spatially distributable, efficient and continuously operatable features. Herein, we tackle challenges posed by the increasingly available UAV-based hyperspect ral images in riverine environments to identify the presence of hazardous chemical solvents in rivers, which are less investigated in the absence of direct measurement strategies. We propose a referable standard procedure for a unique spectral library based on pre-scanning hyperspectral sensors with respect to representative hazardous chemicals registered on the national hazardous chemical list. We utilized the hyperspectral images to identify 18 types of hazardous chemicals injected into the river in an outdoor environment, where a dedicated hyperspectral ground imaging system mounted with a hyperspectral camera was designed and applied. Finally, we tested the efficiency of the library to recognize unknown chemicals, which showed >70% success rate.

Increases in algal growth have been reported in rivers, reservoirs, and other water resources worldwide, including Korea. Algal overgrowth can result in algal bloom, which has several negative impacts, such as ecosystem degradation and economic losses. Mitigation measures employed in Korea include an algal warning system and survey-based water quality forecast systems. However, these methods are time-consuming and require sample collection from the site. On the other hand, remote sensing techniques that use chlorophyll a are unable to distinguish between different types of algal species. In this paper, we aimed to identify a classification technique based on remote sensing methods that can be used to distinguish between blue-green algae and green algae. We acquired and prepared an algal culture solution and used a hyperspectral sensor to obtain an algae spectrum. Thereafter, we measured the absorption and emission spectra of blue-green and green algae and distinguished them using the instantaneous slope change of the spectrum. The absorption spectra for green algae showed two peaks at 417–437 nm and 661–673 nm, whereas those of blue-green algae showed three peaks at 449–529 nm, 433–437 nm, and 669–677 nm. The results of this study could form a basis for developing mitigation measures for algal overgrowth.

Characterizing morphological features in shallow streams such as dunes and ripples is vital to studies on fluvial geomorphology and in-stream habitat assessments of stream ecology. The paper aimed to examine the feasibility of a conventional hyperspectral method called linear optimal band ratio analysis for capturing the detailed morphologies in shallow small streams, allowing the identification of ripples and dunes. The present study involved a dedicated field experiment at the Gam stream, which is a tributary of the Nakdong River, South Korea. An unmanned aerial vehicle based hyperspectral image was obtained with a spatial resolution of <10 cm and developed an optimal depth-band ratio rating by densely scattered in situ bathymetry measurements with a portable Real Time Kinematic Global Positioning System. The derived hyperspectral bathymetric map with a 7 cm spatial resolution successfully captured the detailed bed morphology, where dunes with sizes of 1.5 m were clearly identifiable. The correlation with depth measured by RTK-GPS was found to be 0.956, with Root Mean Square Error of 0.033 meter. The research confirmed that the conventional linear OBRA used for low-altitude UAV-based hyperspectral images can capture morphological features in shallow streams with a high spatial resolution.

Flood inundation and hazard maps have played various crucial roles in terms of municipal hazard planning, timely flood control countermeasure operation, economic levee design, and developing flood forecasting or nowcasting systems. Given that the riparian areas prone to flood conventionally imposed special cares to justify applications of recently available flood inundation or hazard assessment numerical models on top of digital elevation models of dense spatial resolution such as LiDAR irrespective of their high costs. However, laborious and time & cost-consuming processes were required to proficiently produce inundation and hazard maps, which includes preparation of geometric and hydrologic data as input for the targeted numerical model, executing the model and post-processing, and inundation and subsequent hazard mapping. For example in Korea, field surveyed geometric dataset are provided in CAD format and should have to be manually converted into cross-sectional information compatible with HEC-RAS as a numerical model, where such dataset are not managed in centralized and standardized database. Then, flood inundation and hazard maps are generated one by one based on flood stage heights simulated from the HEC-RAS, where additional tools such as HEC-GeoRAS or manual drawing against DEM are usually applied. In order to efficiently and cost-effectively provide a series of flood inundation and hazard maps automatically with minimum practitioner involvement, this study demonstrates a set of open-source based tools that automated flood and hazard mapping processes as follows: a) parse CAD files containing geometric surveys like cross-sections and store them into server-based Arc River database approachable through website; b) retrieve geometric information using RiverML from Arc River and implicitly make them compatible with HEC-RAS input format; c) execute the HEC-RAS with some designated boundary conditions and various flood discharge; d) parse HEC-RAS output in binary format and draw flood inundation and hazard map on a given DEM through a developed add-on in QGIS using Python. We found that the proposed entire autonomous processes substantially enhanced efficiency and accuracy for flood mapping. The spatial accuracy of flood inundation and hazard map after applying above processes were validated throughout comparison with an inundation trace map acquired from typhoon Nari, 2007, in Hancheon basin located in Jeju Island, Korea, where a series of inundation and hazard maps were comprehensively investigated to track the burst of flood in the extreme flood events. AcknowledgmentThis work was supported by the US Geological Survey Cooperative Grant Agreement #G19AC00257 and by the Korea Agency for Infrastructure Technology Advancement (KAIA) grant funded by the Ministry of Land, Infrastructure and Transport (21AWMP- B121092-06).

River basin surveys are conducted with the aim of providing essential foundational information for the formulation of water management policies, as mandated by relevant laws and regulations. These surveys cover key investigation areas necessary for river basin management, including basic conditions, water conveyance, dimensions, environmental ecology, and more. Among the survey methods, the utilization of remote sensing data, such as drone monitoring imagery and satellite imagery, is employed for various purposes such as the safety management of hydraulic structures like dams and embankments, water quality monitoring, river terrain surveys, and assessments of changes in riverbeds. Recently, research in river basin studies has been conducted using hyperspectral imagery, which includes hundreds of spectral bands, in addition to standard RGB imagery. Hyperspectral imagery offers the advantage of high spectral resolution, making it suitable for multi-parameter assessments. However, it comes with the drawback of large initial data volumes and complex preprocessing requirements due to the abundance of spectral information. On the other hand, multispectral imagery, which collects spectral information from fewer than ten bands, is widely used, especially in agriculture and forestry. It allows for immediate monitoring of parameters like the normalized difference vegetation index (NDVI) using just two bands and facilitates the analysis of crop growth status and more. Research on bathymetric estimation using hyperspectral imagery has traditionally relied on the Optimal Band Ratio Analysis (OBRA), which utilizes band ratios highly correlated with depth to construct bathymetric maps. In this study, we applied the existing hyperspectral bathymetric estimation technique to multispectral imagery to assess the feasibility of bathymetric estimation using reduced spectral bands. We captured multispectral imagery and constructed bathymetric maps to evaluate the applicability of multispectral imagery in river basin applications. Furthermore, to overcome the limitations of traditional OBRA, we employed Gaussian mixture models for image clustering to improve the accuracy of bathymetric estimation.