Here, the potential of laser-induced breakdown spectroscopy (LIBS) in grading calcareous rocks for the lime industry was investigated. In particular, we developed a system equipped with non-intensified detectors operating in scanning mode, defined a suitable data acquisition protocol, and implemented quantitative data processing using both partial least squares regression (PLS-R) and a multilayer perceptron (MLP) neural network. Tests were carried out on 32 samples collected in various limestone quarries, which were preliminarily analyzed using traditional laboratory X-ray fluorescence (XRF); then, they were divided into two groups for calibration and validation. Particular attention was dedicated to the development of LIBS methodology providing a reliable basis for precise material grading. The congruence of the results achieved demonstrates the capability of the present approach to precisely quantify major and minor geochemical components of calcareous rocks, thus disclosing a concrete application perspective within the lime industry production chain.

In this study, we investigated flotation muds (FM) deriving from the recovery processes of precious metals contained in e-waste (wastes from electronics) and exhausted catalysts. FM consist of an amorphous phase, corresponding to a Ca- and Al-rich silicatic glass, potentially usable as a secondary raw material (SRM) to obtain a final ceramic product (CFM). A high FM amount was used in our ceramic tests, and suitably mixed with variable percentages of other phases. Chemical analysis, phase composition, microstructure, pore pattern and technological properties of the new ceramic products were determined using different analytical techniques, including bulk XRF, XRD, SEM-EDS and µCT. The CFM product predominantly consists of nepheline, pyroxene and wollastonite as the main crystalline phases, with a minor amorphous phase occurring as a compact interstitial matrix. The ceramic product has a porous interconnected microstructure. Nevertheless, this microstructure does not negatively affect the mechanical properties of the ceramic product, as testified by the geo-mechanical tests, revealing good properties in terms of bending and uniaxial strength. These preliminary results point out that FM recycling is feasible, at least at the laboratory scale.