A model for calculating the temperature in an ion source with plasma heating by a radio-frequency MHz electromagnetic field is presented. The heat fluxes caused by the discharge plasma distributed over the ion-source surfaces are determined. In the model it is accepted that the heat transfer between ionsource elements is performed by radiation and heat conductivity. The contact thermal resistances between conjugate elements are taken into account. Calculated results of the temperature for the developed thruster with a power of 50 kW are presented.
The determination of ion mass for low-pressure Maxwellian plasmas has been proposed. It can be done using Langmuir probe measurements and the Bohm formula for the ion current density to a floating probe, due to this formula’s reliance on ion mass. This goal was achieved by accurate measurements of xenon plasma parameters in the inductive discharge at pressure p = 2 ⋅ 10−3 Torr using the Plasma Sensors VGPS-12 probe station with the cylindrical Langmuir probes. The analysis of measurement data showed that in these conditions, the Bohm effect was valid with engineering-level precision, resulting in the experimental Bohm coefficient CBCyl ≈ 1.13 for cylindrical probes.
1 November 2019 in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
In ion sources, up to a third of the power released in a plasma discharge is carried away from the plasma in the form of ultraviolet radiation. Two main mechanisms for the formation of radiation are considered: radiation from excited atoms of the propellant and from ion-electron recombination coming out of plasma onto the surface bordering the discharge. The radiation-absorption coefficients of perforated electrodes of ion-extraction systems are determined.
1 November 2017 in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
The power balance in the inductive discharge of a radio-frequency ion source is worked out by calculating the power losses caused by plasma deposition on the surfaces bordering it, by the power...