This paper presents a generic technique for the transient nonlinear dynamic analysis (TNDA) and the static equilibrium stability analysis (SESA) of a turbomachine running on foil air bearings (FABs). This technique is novel in two aspects: (i) the turbomachine structural model is generic, based on uncoupled modes (rotor is flexible, nonsymmetric and includes gyroscopic effects; dynamics of support structure can be accommodated) and (ii) the finite-difference (FD) state equations of the air films are preserved and solved simultaneously with the state equations of the foil structures and the state equations of the turbomachine modal model, using a readily available implicit integrator (for TNDA) and a predictor-corrector approach (for SESA). An efficient analysis is possible through the extraction of the state Jacobian matrix using symbolic computing. The analysis is first applied to the finite-element model of a small commercial automotive turbocharger that currently runs on floating ring bearings (FRBs) and is slightly adapted here for FABs. The results of SESA are shown to be consistent with TNDA. The case study shows that, for certain bearing parameters, it is possible to obtain a wide speed range of stable static equilibrium operation with FABs, in contrast to the present installation with FRBs. Application of the method to a test rig reported in the literature reveals a reasonable degree of correlation between theory and experiment.
Floating ring bearings (FRBs) used to support turbochargers are well known to be highly non-linear elements that introduce self-excitation. The prediction of such vibration is of utmost importance to turbocharger designers. This article presents an original computational method for the non-linear dynamic analysis of a turbocharger on FRBs, which is used in a novel study of the self-excited vibration of a realistic turbocharger model. The proposed method is designed to overcome restrictions of current rotordynamic software packages relating to structural and bearing modelling and computational implementation. The equations of motion are formulated in modal space and integrated for the response. The program uses the modal parameters of the generic linear part of the structure, which can be pre-computed by using standard finite-element software. The non-linear computation of the full assembly is itself efficiently implemented on standard mathematical software. Both fully floating and semi-floating rings are considered in the simulations, and the findings of the simulations indicate that the latter configuration may lead to significant reduction of self-excited vibration.
17 December 2010 in Journal of Vibration and Acoustics
The modeling and analysis of base-excited piezoelectric energy harvesting beams have attracted many researchers with the aim of predicting the electrical output for a given base motion input. Despite this, it is only recently that an accurate model based on the analytical modal analysis method (AMAM) has been developed. Moreover, single-degree-of-freedom models are still being used despite the proven potential for significant error. One major disadvantage of the AMAM is that it is restricted to simple cantilevered uniform-section beams. This paper presents two alternative modeling techniques for energy harvesting beams and uses these techniques in a theoretical study of a bimorph. One of the methods is a novel application of the dynamic stiffness method (DSM) to the modeling of energy harvesting beams. This method is based on the exact solution of the wave equation and so obviates the need for modal transformation. The dynamic stiffness matrix of a uniform-section beam could be used in the modeling of beams with arbitrary boundary conditions or assemblies of beams of different cross sections. The other method is a much-needed reformulation of the AMAM that condenses the analysis to encompass all previously analyzed systems. The Euler–Bernoulli model with piezoelectric coupling is used and the external electrical load is represented by generic linear impedance. Simulations verify that, with a sufficient number of modes included, the AMAM result converges to the DSM result. A theoretical study of a bimorph investigates the effect of the impedance and quantifies the tuning range of the resonance frequencies under variable impedance. The neutralizing effect of a tuned harvester on the vibration at its base is investigated using the DSM. The findings suggest the potential of the novel concept of a variable capacitance adaptive vibration neutralizer that doubles as an adaptive energy harvester. The application of the DSM to more complex systems is illustrated. For the case studied, a significant increase in the power generated was achieved for a given working frequency through the application of a tip rotational restraint, the use of segmented electrodes, and a resized tip mass.
18 November 2019 in Journal of Vibration and Acoustics
Blade tip timing (BTT) includes a number of uncertainties that discourage its use. One of the main ones is the shift in the equilibrium position of the blade tip due to steady (non-oscillatory) bending and/or twisting of the blade, and axial movement of the bladed disk (blisk)-shaft system. This results in a shift in the effective measurement position of the probe relative to the blade chord, resulting in errors in the tip vibration measurement which can translate to a huge error in the corresponding stress estimate, which relies on calibration against finite element (FE) models. Previous experimentally validated research by the authors introduced a method for quantifying steady movement of a single type (axial, lean, or untwist), using BTT data from not more than two probes. In this paper, a development of the previous method is presented that provides a solution for the case of simultaneous types of blade steady movements. Additional probes are used for determining the direction, but these can be placed at any angular positions. The developed method is validated using a BTT simulator of a blisk, and accurate results obtained. The simultaneous axial and lean movements can be accurately determined when the untwist is negligible, and an uncertainty level can be specified when the untwist is not negligible. The untwist itself can be calculated accurately in all cases of simultaneous movements. Guidelines for the use of the method in different scenarios are provided.
This paper proposes and studies the nonparametric system identification of a foil-air bearing (FAB). This research is motivated by two advantages: (a) it removes computational limitations by replacing the air film and foil structure equations by a displacement/force relationship and (b) it can capture complications that cannot be easily modeled, if the identification is based on empirical data. A recurrent neural network (RNN) is trained to identify the full numerical model of a FAB over a wide range of speeds. The variable-speed RNN-FAB model is then successfully validated against benchmark results in two ways: (i) by subjecting it to different input data sets and (ii) by using it in the harmonic balance (HB) solution process for the unbalance response of a rotor-bearing system. In either case, the results from the identified variable-speed RNN maintain very good correlation with the benchmark over a wide range of speeds, in contrast to an earlier identified constant-speed RNN, demonstrating the great potential of this method in the absence of self-excitation effects.