Tahir Mehmood

Dr. Tahir Mehmood


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
BBBarkat Barkat
Barkat Barkat
MAMarina Afzal
Marina Afzal
BKBabar Shahzad Khan
Babar Shahzad Khan
Adnan  Saeed SaeedAdnan Saeed Saeed
Adnan Saeed Saeed
MBMahwish Bashir
Mahwish Bashir
KWKaiming Wu
Kaiming Wu
Biogenic routes for the synthesis of nanoparticles are environmentally friendly, nontoxic, biocompatible, and cost-effective compared to traditional synthesis methods. In this study, cobalt ferrite was synthesized using Zingiber officinale and Elettaria cardamom Seed extracts. Effect of copper contents (x = 0.0, 0.3, 0.6 and 0.9) on the plant extracted Cux(Co1−xFe2O4) was investigated by XRD, SEM, EDX, UV-Vis., PL, FE-SEM, FTIR and photocatalytic activity. XRD results revealed that nanoparticles exhibit a cubical spinel structure with an average diameter of 7–45 nm, calculated by the Debye Scherer formula. The value of the lattice parameter decreased from 8.36 Å to 8.08 Å with substitution of copper, which can be attributed to mismatch of ionic radii of Cu2+ (0.73 Å) and Co2+ (0.74 Å) ions. SEM analysis showed that nanoparticles exhibit a spherical shape (~13 nm diameter) for undoped samples and low Cu concentration, while they changed to a hexagonal structure at higher Cu concentration (x = 0.9) with a diameter ~46 nm and a decreased degree of agglomeration. FE-SEM further confirmed the nanoparticles’ size and shape. EDX analysis confirmed the presence of cobalt, iron, and oxygen without contamination. The optical absorption spectra of UV-vis and PL showed red-shift, which can be accredited to larger crystalline sizes of nanoparticles. FTIR spectra showed two main bands at 410 and 605 cm−1, indicating the presence of intrinsic vibrations of the octahedral and tetrahedral complexes, respectively. The photocatalytic activity of Co0.4Cu0.6 Fe2O4 nanoparticles was investigated using methylene blue (MB) and methyl orange (MO) dyes under visible light irradiation. The degradation rate (93.39% and 83.15%), regression correlation coefficient (0.9868 and 0.9737) and rate constant (0.04286 and 0.03203 rate·min−1) were calculated for MB and MO, respectively. Mechanisms for the formation and photocatalytic activity of Cu-substituted plant-extracted cobalt ferrite were discussed. The Co0.4Cu0.6 Fe2O4 nanoferrite was found to be an efficient photocatalyst, and can be exploited for wastewater treatment applications for MB/MO elimination.

9 September 2019 in Discover Nano
Verified
Journal Article
Open access
PDF file
AMAiman Mukhtar
Aiman Mukhtar
XCXiaoming Cao
Xiaoming Cao
TMTahir Mehmood
Tahir Mehmood
WDwang ds
wang ds
KWKaiming Wu
Kaiming Wu
One of the big challenge of studying the core-shell iron nanostructures is to know the nature of oxide shell, i.e., whether it is γ-Fe2O3 (Maghemite), Fe3O4 (Magnetite), α-Fe2O3 (Hematite), or FeO (Wustite). By knowing the nature of iron oxide shell with zero valent iron core, one can determine the chemical or physical behavior of core-shell nanostructures. Fe core-shell nanochains (NCs) were prepared through the reduction of Fe3+ ions by sodium boro-hydride in aqueous solution at room atmosphere, and Fe NCs were further aged in water up to 240 min. XRD was used to study the structure of Fe NCs. Further analysis of core-shell nature of Fe NCs was done by TEM, results showed increase in thickness of oxide shell (from 2.5, 4, 6 to 10 nm) as water aging time increases (from 0 min, 120 min, 240 min to 360 min). The Raman spectroscopy was employed to study the oxide nature of Fe NCs. To further confirm the magnetite phase in Fe NCs, the Mössbauer spectroscopy was done on Fe NCs-0 and Fe NCs-6. Result shows the presence of magnetite in the sample before aging in water, and the sample after prolonged aging contains pure Hematite phase. It shows that prolonged water oxidation transforms the structure of shell of Fe NCs from mixture of Hematite and Magnetite in to pure hematite shell. The Magnetic properties of the Fe NCs were measured by VSM at 320 K. Because of high saturation magnetization (Ms) values, Fe NCs could be used as r2 contrasts agents for magnetic resonance imaging (MRI) in near future.

15 November 2016 in Applied Physics A
Verified
Journal Article
Closed access
PDF file
AMAiman Mukhtar
Aiman Mukhtar
BKBabar Shahzad Khan
Babar Shahzad Khan
TMTahir Mehmood
Tahir Mehmood

19 August 2019 in Materials
Verified
Journal Article
Open access
PDF file
SNSamia Naeem
Samia Naeem
TMTahir Mehmood
Tahir Mehmood
KWKaiming Wu
Kaiming Wu
BKBabar Shahzad Khan
Babar Shahzad Khan
AMAbdul Majid
Abdul Majid
SRSaira Riaz
Saira Riaz
The effect of laser irradiation with different numbers of laser shots on the microstructure, the surface, and the hardness of gun metal alloy was studied by a KrF pulsed excimer laser system, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and Vickers hardness test. The influence of 100–500 laser shots was irradiated on the surface hardness profile and on the microstructure of gunmetal alloy. XRD results showed the maximum 2θ shift, the maximum full width of half maximum FWHM, the maximum dislocation density, and the minimum crystallite size for the sample irradiated with 300 laser shots. The hardness was measured in three different regions at the laser irradiated spot, and it was found that maximum hardness was present at the heat affected zone for all samples. The hardness value of the un-irradiated sample of gun metal was 180, and the value increased up to 237 by raising the number of laser shots up to 300. The peak value of surface hardness of the laser treated sample was 32% higher than the un-irradiated sample. The Raman shift of the un-exposed sample was 605 cm−1 and shifted to a higher value of wave number at 635 cm−1 at 300 laser shots. The hardness value was decreased by further increasing the number of laser shots up to 500. The samples irradiated with 400 and 500 laser shots exhibited smaller hardness and dislocation defect density, which was assigned to possible annealing caused by irradiation.

31 July 2017 in International Journal of Materials Research
Verified
Journal Article
Closed access
TMTahir Mehmood
Tahir Mehmood
KWK. M. Wu
K. M. Wu
AMAiman Mukhtar
Aiman Mukhtar
BKBabar S. Khan
Babar S. Khan
Adnan  Saeed SaeedAdnan Saeed Saeed
Adnan Saeed Saeed
SKSyeda Ruqaya Kazmi
Syeda Ruqaya Kazmi
Anodic alumina oxide membrane was used to electrodeposit Fe–Ni alloy nanowires by varying the potential. The morphology of electrodeposited alloy nanowires was studied by means of X-ray diffraction, scanning electron microscopy, and transmission electron microscopy characterization techniques. The results indicate that Fe–Ni alloy nanowires have stable fcc phase at −1.4 V and −0.7 V and the content of iron inside nanopores increased with increasing applied potential during deposition. This can be verified by the current density vs time graphs of depositing Fe and Ni nanowires, the current density ratio of Ni to Fe at lower applied potential is greater than at comparatively higher applied potential.

17 August 2016 in American Journal of Applied Chemistry
Verified
Journal Article
Open access
PDF file
TMTahir Mehmood
Tahir Mehmood
AMAiman Mukhtar
Aiman Mukhtar
BKBabar Shahzad Khan
Babar Shahzad Khan
KWKaiming Wu
Kaiming Wu
To understand the mechanism for formation of fcc-cobalt nanowires in electrodeposition, we have systematically studied the effect of deposition potential, pH, and deposition temperature on the formation of fcc Co nanowires by X-ray diffraction (XRD), transmission electron microscope (TEM) and scanning electron microscope (SEM). The Co nanowires deposited at the potential of -1.6V are pure hcp phase. When increasing the value of potential to -2.0V, there are hcp Co and fcc Co crystals in the deposited nanowires. The fraction of fcc Co crystals in the nanowires increases with increasing the potential value. At -3.0V, the nanowires are pure fcc Co. The pH of the solution has little effect on formation of fcc Co nanowires. We have also seen that high concentration and low temperature favors fcc phase whereas low concentration and high temperature favors hcp phase. However, at 35°C the co-occurrence of hcp and fcc phases were also observed. These experimental results can be explained by the classical electrochemical nucleation theory. The formation of fcc Co crystals can be attributed to smaller critical clusters formed at a higher potential value since the smaller critical clusters favor formation of fcc nuclei.