Aluminum is a very good candidate anode for metal–air batteries due to its negative electrode potential, high theoretical electrochemical equivalent value, abundant reserves and environmental friendliness. The corrosion behavior and electrochemical properties of the Al–1.5Bi–1.5Pb–0.035Ga alloy were investigated by self-corrosion tests and electrochemical techniques, and compared with that of pure Al and Al–Bi–Pb alloys. The performances of Al–air batteries based on these alloy anodes were studied by constant current discharge and I–V discharge tests. The corrosion morphology and discharge surface were also investigated by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis. The results show that the Al–Bi–Pb–Ga alloy provides a more negative potential and exhibits an enhanced activity in NaCl solution compared with pure Al and Al–Bi–Pb alloys, and gives high power density (253.4 ± 2.5 mW cm−2) and desirable anode efficiency (85.4 ± 0.5%) when used as an anode for Al–air batteries in KOH solution. Moreover, the dissolution mechanism of the Al–Bi–Pb–Ga alloy is also characterized based on the electrochemical measurements and microstructure observations.
Two-dimensional (2D) V2C MXene has fascinating potential for use as electrodes in high-energy-density supercapacitors because of its excellent electrical conductivity and large specific surface area. However, it is not feasible to synthesize V2C by etching vanadium carbon aluminide (V2AlC) with hydrofluoric acid, which is commonly used for preparing other MXenes. In this work, a modified method is developed for synthesizing high-quality 2D V2C. A mixture of sodium fluoride (NaF) and hydrochloric acid (HCl) was used as the etching agent, where V2AlC can be gently etched by a hydrothermal reactor-assisted method. As electrode materials for supercapacitors, V2C shows the characteristics of electric double layer capacitance. The electrochemical results show high specific capacitance (223.5 F/g in 1 M Na2SO4 at a current density of 100 mA/g) and good cycling stability (the capacitance retention rate can be maintained at 94.7% after 5000 cycles). This work provides a new method for the synthesis of high-quality V2C for application in related fields.
A catalyst of silver nanoparticle decorated CeO2 microspheres was first reported for ORR and applied in an aluminum–air battery with excellent performance.