N-Type (phosphorus-doped) diamond is a promising material for diamond-based electronic devices. However, realizing good ohmic contacts for phosphorus-doped diamonds limits their applications. Thus, the search for non-conventional ohmic contacts has become a hot topic for many researchers. In this work, nanocarbon ohmic electrodes with enhanced carrier collection efficiency were deposited by coaxial arc plasma deposition. The fabricated nanocarbon ohmic electrodes were extensively examined in terms of specific contact resistance and corrosion resistance. The circular transmission line model theory was used to estimate the charge collection efficiency of the nanocarbon ohmic electrodes in terms of specific contact resistance at a specific voltage range (5–10 V); they exhibited a specific contact resistance of 1 × 10−3 Ωcm2. The result revealed one order reduction in the specific contact resistance and, consequently, a potential drop at the diamond/electrode interface compared to the conventional Ti electrodes. Moreover, the fabricated nanocarbon electrodes exhibited high mechanical adhesion and chemical inertness over repeated acid treatments. In device applications, the nanocarbon electrodes were evaluated for Ni/n-type diamond Schottky diodes, and they exhibited nearly one order enhancement in the rectification ratio and a fast charge collection at lower biasing voltages.
Heterojunction diodes are constructed by growing n-type (nitrogen-doped) ultrananocrystalline diamond (UNCD)/hydrogenated amorphous carbon (a-C:H) composite films onto p-type Si substrates in nitrogen and hydrogen mixed-gases by coaxial arc plasma deposition. The fabricated heterojunctions are analyzed regarding their film morphology and electrical properties. The complex structure of UNCD/a-C:H films, which consists of nano-sized-sp 3 diamond grains and sp 2 -grain boundaries (GBs), makes it difficult to separate their contribution to electrical conductivity of the films using conventional characterization methods. In this paper we characterize the n-type UNCD/p-type Si heterojunction diode by employing impedance spectroscopy method, which can isolate the differing components that contribute to the overall conductivity of the film. The impedance spectroscopy is measured in the frequency range of 100 Hz to 2 MHz, with AC small signal superimpose on DC bias voltage in the range of 0–1 V. The influence of the bias on UNCD grains and GBs contribution to resistance and capacitance of UNCD/a-C:H film and n-UNCD/p-Si heterojunction is investigated by equivalent circuit model using fitting of the impedance data. The results revealed that the electrical conductivity is mainly controlled by the GBs rather than the UNCD grains. Furthermore, the extracted value of dielectric constant of N-doped UNCD/a-C:H film is found to be comparable with that of microcrystalline diamond, which indicates the capacitance contribution in the device is mainly originated from the UNCD grains. This study demonstrates capability of impedance spectroscopy to provide an obvious separated contribution of sp 3 and sp 2 bonded carbons to the electrical conductivity in their coexistence materials.