Heterojunctions consisting of p-type diamond substrates and thin exfoliated n-type β-Ga2O3 layers were fabricated at a low temperature using a direct-bonding technique. We have fabricated p+-diamond/n-Ga2O3 (p+–n) and p-diamond/n-Ga2O3 (p–n) structures with different B concentrations in diamond. The p+–n heterojunction exhibited Ohmic behavior, resulting from p+-diamond behaving as a metallic layer. As for the p–n heterojunction, it showed clear rectifying action as a conventional bipolar action with a rectifying ratio >108 at ±10 V and leakage current <10−12 A. The ideality factor and barrier height of the p–n heterojunctions were estimated to be 2.7 and 1.5 eV, respectively. Formation of the p–n junction was evidenced by comparing it with the Schottky junction. An energy band diagram of the p–n heterojunctions with staggered (type-II) band alignment was derived based on electrical investigations.
In this work, we demonstrate the first achievement in heteroepitaxial growth of β-Ga2O3 thin films on single crystalline diamond (111) wafers using RF magnetron sputtering. A single monoclinic (β-phase) structure with a monofamily { 01} plane was obtained. XRD pole figure shows ( 02) and (002) textures of the ( 01) β-Ga2O3 plane parallel to (111) diamond with six distinct rotational domains, confirming successful epitaxial growth. Collectively, this research provides valuable insights into the epitaxial growth of β-Ga2O3 on diamond via sputtering, paving the way for scalable β-Ga2O3/diamond heterostructures for future electronic and optoelectronic applications with not only high performance but also effective self-thermal management.
15 January 2021 in Japanese Journal of Applied Physics
In this study, pseudo-vertical diamond Schottky barrier diodes (SBDs) were fabricated on heteroepitaxial substrates and a metal impurity-incorporated buffer layer to suppress killer defects was inserted. All SBDs exhibited excellent rectifying actions with suppressed leakage current. The in-plane uniformity was improved after the insertion of the buffer layer. Forward characteristics were fitted by thermionic emission theory and Tung’s model in the temperature range from 300 to 480 K. The perfection of the Schottky-diamond interface is discussed. Moreover, the SBDs exhibited a high breakdown voltage with a sudden increase in current at 375 V, which is the highest value reported for heteroepitaxial diamond. These results indicate that heteroepitaxial substrates are a promising alternative for large-area low-cost diamond electronics.
N-Type (phosphorus-doped) diamond is a promising material for diamond-based electronic devices. However, realizing good ohmic contacts for phosphorus-doped diamonds limits their applications. Thus, the search for non-conventional ohmic contacts has become a hot topic for many researchers. In this work, nanocarbon ohmic electrodes with enhanced carrier collection efficiency were deposited by coaxial arc plasma deposition. The fabricated nanocarbon ohmic electrodes were extensively examined in terms of specific contact resistance and corrosion resistance. The circular transmission line model theory was used to estimate the charge collection efficiency of the nanocarbon ohmic electrodes in terms of specific contact resistance at a specific voltage range (5–10 V); they exhibited a specific contact resistance of 1 × 10−3 Ωcm2. The result revealed one order reduction in the specific contact resistance and, consequently, a potential drop at the diamond/electrode interface compared to the conventional Ti electrodes. Moreover, the fabricated nanocarbon electrodes exhibited high mechanical adhesion and chemical inertness over repeated acid treatments. In device applications, the nanocarbon electrodes were evaluated for Ni/n-type diamond Schottky diodes, and they exhibited nearly one order enhancement in the rectification ratio and a fast charge collection at lower biasing voltages.