Yong Zhang

Dr. Yong Zhang


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2017 in Energy & Fuels
Verified
Journal Article
Closed access
YSYali Shao
Yali Shao
YZYong Zhang
Yong Zhang
XWXiaojia Wang
Xiaojia Wang
Xudong WangXudong Wang
Xudong Wang
BJBaosheng Jin
Baosheng Jin
HLHao Liu
Hao Liu

20 August 2019 in International Journal of Chemical Reactor Engineering
Verified
Journal Article
Closed access
PDF file
YZYong Zhang
Yong Zhang
ZRZhenzhen Ran
Zhenzhen Ran
BJBaosheng Jin
Baosheng Jin
YZYouwei Zhang
Youwei Zhang
CZChunlei Zhou
Chunlei Zhou
FSF Sher
F Sher
In practical engineering applications, the mixing and separation behavior of multi-component particles is importance to the fluidized bed operation. The development of many practical processes is inseparable from the knowledge of particle mixing and separation, such as material processing of ash-soluble coal gasification, multi-phase flow in boilers, and petrochemical catalytic processes. In recent years, due to the obvious advantages of the Eulerian–Eulerian model, many researchers at home and abroad have used it to study the mixing and separation behavior of particles. The paper reviews the use of Eulerian–Eulerian model to study the mixing and separation of multi-component particles in fluidized beds. The Eulerian–Eulerian model describes the gas-phase and each of the individual particles as continuums. The mechanism of particle mixing and separation, the influence of different factors on the particle mixing and separation including differences in particle size and density, the differences in apparent air velocity, the differences in model factors are discussed. Finally, an outlook for the use of Eulerian–Eulerian model to study the mixing and separation behavior of three component particles and related research on the drag model between particles.

7 November 2018 in Catalysts
Verified
Journal Article
Open access
PDF file
XWXiaojia Wang
Xiaojia Wang
BJBaosheng Jin
Baosheng Jin
HLHao Liu
Hao Liu
Bo ZhangBo Zhang
Bo Zhang
YZYong Zhang
Yong Zhang
Chemical Looping Combustion (CLC) has been considered as one of the most promising technologies to implement CO2 capture with low energy penalty. A comprehensive three-dimensional numerical model integrating gas–solid flow and reactions, based on the authors’ previous work (Energy Fuels 2013, 27, 2173–2184), is applied to simulate the in-situ Gasification Chemical Looping Combustion (iG-CLC) process in a circulating fluidized bed (CFB) riser fuel reactor. Extending from the previous work, the present study further validates the model and investigates the effects of several important operating conditions, i.e., solids flux, steam flow and operating pressure, on the gas–solid flow behaviors, CO2 concentration and fuel conversion, comprehensively. The simulated fuel reactor has a height of 5 m and an internal diameter of 60 mm. The simulated oxygen carrier is a Norwegian ilmenite and the simulated fuel is a Colombian bituminous coal. The results of this simulation work have shown that an increase in the solids flux can promote CO2 concentration, but may also have a negative effect on carbon conversion. A decrease in the steam flow leads to positive effects on not only the CO2 concentration but also the carbon conversion. However, the reduction of steam flow is limited by the CFB operation process. An increase in the operating pressure can improve both the CO2 concentration and carbon conversion and therefore, the CFB riser fuel reactor of a practical iG-CLC system is recommended to be designed and operated under a certain pressurized conditions.

6 September 2019 in Processes
Verified
Journal Article
Open access
PDF file
XWXiaojia Wang
Xiaojia Wang
XLXianli Liu
Xianli Liu
YZYong Zhang
Yong Zhang
Bo ZhangBo Zhang
Bo Zhang
BJBaosheng Jin
Baosheng Jin
The in-depth understanding of the gas–solid flow and reaction behaviors, and their coupling characteristics during the chemical looping combustion (CLC) process has the guiding significance for the operation and optimization of a chemical looping combustor. A three-dimensional numerical model is applied to investigate the char-fueled CLC characteristics in a fuel reactor for efficient CO2 separation and capture. Simulations are carried out in a bubbling fluidized bed fuel reactor with a height of 2.0 m and a diameter of 0.22 m. The initial bed height is 1.1 m, and hence the height–diameter ratio of the slumped bed is five. The oxygen carrier is prepared with 14 wt% of CuO on 86 wt% of inert Al2O3. In the process of mathematical modeling, a Eulerian-Eulerian two-fluid model is adopted for both of the gas and solid phases. Gas turbulence is modeled on the basis of a k–ε turbulent model. The reaction kinetics parameters are addressed based upon previous experimental investigations from literature. During the simulation, the gas–solid flow patterns, composition distributions, and reaction characteristics are obtained. Moreover, the effects of solids inventory and fluidizing number on the reaction performance are elucidated in-depth. The results have shown that the reaction rates have close relationship with the flow patterns and the distributions of gas concentrations. Compared to the steam-char gasification over sand, the application of char-fueled CLC can effectively promote the conversion of gasification products. In addition, higher CO2 concentration at the outlet can be achieved by increasing the initial solids inventory or decreasing the fluidizing number. Some calculated values are verified by the previous data, indicating that the current three-dimensional models are reasonable to study the process mechanism of char-fueled CLC.

10 November 2021 in International Journal of Chemical Reactor Engineering
Verified
Journal Article
Closed access
YZYong Zhang
Yong Zhang
YLYuyang Liu
Yuyang Liu
XYXigang Yang
Xigang Yang
GCGuoqing Chen
Guoqing Chen
BJBaosheng Jin
Baosheng Jin
For an air staged combustion boiler, the rational organization of jets to form closing-to-wall film using as little air as possible plays a key role in resolving the high temperature corrosion problems. In this work, a comprehensive computational fluid dynamics (CFD) model including hydrodynamics and coal combustion is established for a 660 MW opposed wall fired boiler. Based on the grid independence and model validation, the flow field, temperature profile, and species concentration are predicted, and the influences of the structure of nozzles and the operation parameter of jets are further evaluated. The results show that the corrosion area of the side wall is dependent on the jet projection velocity and nozzle structures. The increase of the jet velocity does not always have an active influence on the reduction of corrosive area. Only increasing the nozzle diameter does not always have a positive impact on the improvement of the corrosion. The increase of the jet inclination angle can extend the jet trajectory, contributing to increase the oxygen coverage area. Reasonably adjusting the jet inclination angle of each layer can obtain the lower corrosion area. The increase of jet row number leads to a decrease in the spacing between rows, which enables the downstream jet to penetrate deeper into the cross stream. By increasing the number of jet layers and reducing the jet velocity of each layer, the lowest corrosion area can be obtained.

1 August 2024 in International Journal of Chemical Reactor Engineering
Verified
Journal Article
Closed access
GCGuoqing Chen
Guoqing Chen
YMYuting Mei
Yuting Mei
YZYong Zhang
Yong Zhang
BJBaosheng Jin
Baosheng Jin
A comprehensive understanding of the flow regime transition is a prerequisite for designing and operating the rotating drum, especially when dealing with non-spherical particles. In this study, the multi-sphere method was used to construct cylindrical particles. The optimal number of spherical elements for particles with different aspect ratios was determined in terms of kinetic energy, rotational kinetic energy, collision number, collision force, deformation and angle of repose. And the effects of filling rate, rotational speed and particle size on the macro- and micro-behavior of cylindrical particles were systematically investigated. The results show that when the aspect ratio of cylindrical particle is 2, 3 and 4, the optimal number of spherical elements are 5, 8, and 10, respectively. Four flow structures, namely rolling, cascading, cataracting and centrifuging, were identified with the increase of the rotation speed, but the transition boundary from rolling to cascading is not clear due to the irregular particle shape. Three flow structures, namely slipping, transition, and cascading, were identified with the increase of the filling degree. The transition diagram of flow regime was established. The results show that the aspect ratio has a great influence on the flow transition from slipping to cascading regime. The area covered by the transition flow regime expands as the aspect ratio increases, necessitating a greater filling degree to achieve a stable rolling flow regime.