In recent years, there has been a growing replacement of synthetic fibers by natural ones, particularly by autochthonous materials. In the case of Algeria, the most abundant plant resources are the PALF (Pineapple leaf fiber), the date palm, and the Alfa fibers. In this work, the development and use of analytical and numerical methods are proposed to predict the mechanical properties of layers based on natural fibers that will be applied to manufacture skins of the sandwich cylinder. To achieve these predictions, four analytical models were used, namely the Halpin–Tsai, the Chamis, the Hashin vs. Rosen, and the ROM. The analytical results were compared with the numerical simulations and experimental data. The prediction of the elastic properties of the three fiber-based eco-composites showed an important dispersion in terms of stiffness.
The objective of this study is to evaluate the potential applications of eco friendly-composites based on natural fibers. An analytical model has been developed in the present research to investigate the mechanical behavior of sandwich pipes under internal pressure loading. The proposed model gives an accurate solution for stresses, strains, and displacement on a sandwich pipe consisting of epoxy for the core layer and reinforced materials with an alternative ply for the skin layers. The purpose of this study is to evaluate the potential applications of three natural fibers, which are pineapple leaf fiber (PALF), Alfa, and jute bio fibers in replacing synthetic glass fiber used in sandwich pipes. The solutions are obtained by using the MATLAB numerical code. The TSAI-WU criterion was used to provide a failure analysis on this subject. The distributions of stress, strain, and displacement through the thickness of the skins and core are shown. Progressive strengthening of layer numbers was chosen to raise the rigidity of a biocomposite sandwich and reduce the gap compared to a synthetic sandwich, which allowed for optimal behavior. The ultimate pressure and safety factors earned by increasing the number of biocomposite layers are important for composite transportation pressure pipelines, especially for sandwich pipes based on PALF/epoxy.
This research work aims to implement empirical models for predicting the failure pressure of a pipeline corroded with a single defect and internal pressure applications. For this purpose, five approaches were used: two artificial intelligence (AI) models with experimental data, a finite-element model (FEM), and two analytical models (ASME B31G modified and DNV-RP-F101). The two proposed artificial models were implemented and optimized in order to find their best performance. The first AI method is an artificial neural network with multilayer perceptron (ANN-MLP), and the second is a support vector machine radial basis function (SVM-RBF). The comparison of the results of these two models proves the good precision of the ANN-MLP, with the correlation coefficient R = 0.9906 and R = 0.9888, ahead of the SVM-RBF with R = 0.9290 and R = 0.9260, respectively, for the two phases of training and testing. In addition, the output results of ANN-MLP are analyzed by William’s diagram; it was noted that 97.82% (180/184) of points belong to the field of validity and applicability of the artificial optimal model. In addition, the sensitivity analysis demonstrates a linear correlation between depth defect and the failure pressure with 32.77%, followed by the length of defect and the inner diameter with 20.04% and 19.81%, respectively. According to the present regression analysis, the results obtained from the ANN-MLP and finite-element method (FEM) are more accurate compared with SVM-RBF and other analytical models. However, the predicted failure pressure values demonstrated strong agreement across all the five approaches.