Yudong Hu

Dr. Yudong Hu

Harbin Institute of Technology, Harbin, Heilongjiang, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 April 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
YHYudong Hu
Yudong Hu
CGChangsheng Gao
Changsheng Gao
WJWuxing Jing
Wuxing Jing
Aimed at joint state and parameter estimation problems in hypersonic glide vehicle defense, a novel moving horizon estimation algorithm via Carleman linearization is developed in this paper. First, the maneuver characteristic parameters that reflect the target maneuver law are extended into the state vector, and a dynamic tracking model applicable to various hypersonic glide vehicles is constructed. To improve the estimation accuracy, constraints such as path and parameter change amplitude constraints in flight are taken into account, and the estimation problem is transformed into a nonlinear constrained optimal estimation problem. Then, to solve the problem of high time cost for solving a nonlinear constrained optimal estimation problem, in the framework of moving horizon estimation, nonlinear constrained optimization problems are transformed into bilinear constrained optimization problems by linearizing the nonlinear system via Carleman linearization. For ensuring the consistency of the linearized system with the original nonlinear system, the linearized model is continuously updated as the window slides forward. Moreover, a CKF-based arrival cost update algorithm is also provided to improve the estimation accuracy. Simulation results demonstrate that the proposed joint state and parameter estimation algorithm greatly improves the estimation accuracy while reducing the time cost significantly.

4 September 2024 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
QDQingfeng Du
Qingfeng Du
YHYudong Hu
Yudong Hu
WJWuxing Jing
Wuxing Jing
CGChangsheng Gao
Changsheng Gao
Concerning the configuration issue of moving-mass in high-mass-ratio hypersonic vehicles, this paper proposes a single moving-mass roll and trim control hypersonic vehicle and presents an optimization methodology for moving-mass parameters based on the uncontrollable state variable. Firstly, an eight-degree-of-freedom dynamic model of the vehicle is established, and then the impact of the moving-mass dynamic characteristics on the vehicle is analyzed to simplify the vehicle's attitude model. Secondly, the degree of controllability is employed to quantify the vehicle's attitude control capabilities under various moving-mass parameters. Based on the degree of controllability, the uncontrollable state and the uncontrollable state variable are introduced to characterize the vehicle's control capacity ceiling. And a methodology to enhance vehicle's degree of controllability predicated on the uncontrollable state variable, along with the moving-mass parameter optimization design methodology, is presented. Finally, this methodology is applied to the optimization design of the moving-mass deflection angles for single moving-mass roll and trim control hypersonic vehicle conceived in this paper. Consequently, the moving-mass deflection angles that maximize the vehicle's attitude degree of controllability is determined, and a theoretical analysis of the optimized moving-mass deflection angles is conducted to validate the rationality of the moving-mass parameter optimization methodology.

9 November 2023 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
GCGuanghui Cheng
Guanghui Cheng
YHYudong Hu
Yudong Hu
WJWuxing Jing
Wuxing Jing
RARuoming An
Ruoming An
CGChangsheng Gao
Changsheng Gao
The article studies the problem of trajectory correction optimization for aerodynamic load shedding in the rocket's ascending phase considering the wind. Based on the statistical horizontal wind field, the weakest wind field is proposed to plan the nominal trajectory, and the strongest wind field is proposed to test the performance of the designed trajectory. Considering the weakest wind field, two time-varying correction coefficients are calculated by one deep neural network unlike the traditional methods, and used to plan the rocket's flight attitudes when optimizing the rocket's trajectory. There are a large number of parameters to be optimized in this problem, so the traditional trajectory optimization techniques may suffer from poor convergence issues. By introducing the chaotic function into the traditional evolution strategy with covariance matrix adaptation, a novel variant C-CMA-ES is proposed to solve the trajectory optimization problem, and its efficiency is demonstrated by some popular test functions. Besides, the cost function to be minimized is shaped based on the rocket's maximal normal aerodynamic load and final state deviations. Finally, compared with the other three strategies, the efficiency of the proposed trajectory correction strategy is demonstrated by multiple simulation scenarios considering the strongest wind field and the Monte Carlo method considering the random wind fields.

21 January 2022 in Journal of Chemistry and Technologies
Verified
Journal Article
Open access
PDF file
КСКостянтин М. Сухий
Костянтин М. Сухий
ОБОлена А. Беляновская
Олена А. Беляновская
АНАлла М. Носова
Алла М. Носова
YHYudong Hu
Yudong Hu
ЮКЮрій С. Кочергін
Юрій С. Кочергін
THTetiana I. Hryhorenko
Tetiana I. Hryhorenko
A systemic study of the possibility of regulating the deformation-strength, adhesion and dynamic mechanical properties of epoxy-polysulphide composites based on the products of the preliminary thioetherification reaction (PRTE) by varying the concentration of polysulphide rubber, as well as changing the amount of the hardener and using a mineral filler has been carried out. An increase in the content of rubber in the product of the preliminary thioetherification reaction was found to promote an increase in the characteristics of cohesive and adhesive strength, deformation at break and the work of destruction of the material. An increase in the complex of properties is assumed to result from the formation of higher molecular weight products with an increase in the rubber content in the composition subjected to PRTE. The formation of such products is confirmed by the data of dynamic mechanical spectrometry. It has been shown that by changing the amount of the introduced hardener, i.e., by changing the ratio of amine and epoxy groups, it is possible to effectively regulate the deformation and strength characteristics of epoxy-polysulphide mixtures. With an increase in the content of the hardener, the tensile strength, deformation at break and the work of destruction of the material increase very significantly. It was found that the introduction of a filler into an epoxy system containing a large amount of rubber promotes an increase in cohesive strength with a relatively small decrease in adhesion strength and deformation at break.

26 January 2023 in Journal of Chemistry and Technologies
Verified
Journal Article
Open access
PDF file
КСКостянтин М. Сухий
Костянтин М. Сухий
ОБОлена А. Беляновская
Олена А. Беляновская
АНАлла М. Носова
Алла М. Носова
Liliya FrolovaLiliya Frolova
Liliya Frolova
МСМихайло К. Сухий
Михайло К. Сухий
ТГТетяна І. Григоренко
Тетяна І. Григоренко
The possibilities of controlling the deformation-strength, adhesive and dynamic mechanical properties of epoxy-polysulfide composites based on the products of the preliminary thioetherification reaction (PRTE) with the help of small additions of polyoxypropylenetriamine and changing the concentration of oxirane cycles in the epoxy resin are determined. It has been established that the introduction of polyoxypropylenetriamine into compositions based on the products of the preliminary reaction of thioetherification of epoxy resin with liquid polysulfide rubber (thiokol) leads to an increase in adhesive and cohesive strength, strain at break, and the work of destruction of the material. The effect is achieved both by adding polyoxypropylenetriamine to a mixture of epoxy resin with liquid thiol during PRTE, and by using it as a co-hardener when curing PRTE with diethylenetriamine. It has been shown that the presence of polyoxypropylenetriamine in the PRTE product has a significant effect on the dynamic mechanical characteristics of the cured composition. The introduction of polyoxypropylenetriamine contributes to a noticeable increase in the dynamic modulus of elasticity in the region of the glassy state of the composite and the molecular weight of the chain section between the nodes of the chemical network, as well as the maximum value of the mechanical loss tangent and loss modulus. An extreme dependence of the adhesive shear strength of adhesive joints made using PRTE products on the content of epoxy groups in the resin has been revealed. The effect of strengthening adhesive joints due to modification with polysulfide rubber is most pronounced for epoxy resins, in which the content of oxirane cycles ranges from 8 to 15 %.

4 December 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
OSOlga Starinova
Olga Starinova
VKVyacheslav Kupczov
Vyacheslav Kupczov
CGChangsheng Gao
Changsheng Gao
YHYudong Hu
Yudong Hu
MFMaksim Fain
Maksim Fain
RKRoman Khabibullin
Roman Khabibullin
The problem of control laws, allowing the formation and maintenance of the required halo-orbit, is considered. The motion of the electric propulsion spacecraft is considered in the vicinity of the collinear libration points of the Earth-Moon system. The gravitational effects of the Earth, the Moon and the Sun are taken into account. The results are based on the simplified linearized models of the gravitational potential.