Resonant tunneling diode (RTD) technology is emerging as one of the promising semiconductor-based solid-state technologies for terahertz (THz) wireless communications. This article provides a review of the state of the art, with a focus on the THz RTD oscillator, which is the key component of RTD-based THz transmitters and coherent receivers. A brief summary on the device principle of operation, technology, modeling, as well as an overview of oscillator design and implementation approaches for THz emitters, is provided. A new insight to device evaluation and to the reported oscillator performance levels is also given, together with brief remarks on RTD-based THz detectors. Thereafter, an overview of the reported wireless links which utilize an RTD in either transmission or reception, or in both roles, is given. Highlight results include the record single-channel wireless data rate of 56 Gb/s employing an all RTD-based transceiver, which demonstrates the potential of the technology for future short-range communications. The article concludes with a discussion of the current technical challenges and possible strategies for future progress.

Terahertz (THz) oscillators based on resonant tunneling diodes (RTDs) have relatively low output power, tens to hundreds of microwatts. The conventional designs employ sub-micron sized RTDs to reduce the device self-capacitance and, as a result, realise higher oscillation frequencies. However, reducing the RTD device size leads to lower output power. In this paper we present RTD oscillators which can employ one or two RTD devices of relatively large size, 9 - 25 μm2, for high power and, at the same time, can oscillate at THz frequencies. This is achieved through low resonating inductances realized by microstrip or coplanar waveguide (CPW) transmission line short stubs with low characteristic impedances (Z0), which have lower inductance values per unit length and so compensate the increase of the self-capacitance of large area RTD devices. Thus, fabrication using only photolithography is possible. It is also shown that device sizing, which is limited only by bias stability considerations, does not limit device bandwidth. Further, we report a new way to estimate the RTD oscillator output power with frequency. A series of oscillators with oscillation frequencies in the 245 - 309 GHz range and output powers from 0.1 - 1 mW have been demonstrated showing the feasibility of the proposed approach.

This paper reports on a 15-Gb/s wireless link that employs a high-power resonant tunneling diode (RTD) oscillator as a transmitter (Tx). The fundamental carrier frequency is 84 GHz and the maximum output power is 2 mW without any power amplifier. The reported performance is over a 50-cm link, with simple amplitude shift keying modulation utilized. The 15-Gb/s data link shows correctable bit error rate (BER) of 4.1 x 10⁻³, while the lower data rates of 10 and 5 Gb/s show a BER of 3.6 x 10⁻⁴ and 1.0 x 10⁻⁶, respectively. These results demonstrate that the RTD Tx is a promising candidate for the next-generation low-cost, compact, ultrahigh data rates wireless communication systems.

Terahertz (THz) imaging is a rapidly growing application motivated by industrial demands including harmless (non-ionizing) security imaging, multilayer paint quality control within the automotive industry, insulating foam non-invasive testing in aerospace, and biomedical diagnostics. One of the key components in the imaging system is the source and detector. This paper gives a brief overview of room temperature THz transceiver technology for imaging applications based on the emerging resonant tunneling diode (RTD) devices. The reported results demonstrate that RTD technology is a very promising candidate to realize compact, low-cost THz imaging systems.

We report on high-efficiency, high-power, and low-phase-noise resonant tunneling diode (RTD) oscillators operating at around 30 GHz. By employing a bias stabilization network, which does not draw any direct current (dc), the oscillators exhibit over a tenfold improvement in the dc-to-RF conversion efficiency (of up to 14.7%) compared to conventional designs (~ 0.9%). The oscillators provide a high maximum output power of around 2 dBm, and low phase noise of -100 and -113 dBc/Hz at 100 kHz and 1 MHz offset frequencies, respectively. The proposed approach will be invaluable for realizing very high efficiency, low phase noise, and high-power millimeter-wave (mm-wave) and terahertz (THz) RTD-based sources.

This article presents a novel, on-wafer deembedding technique for the accurate small-signal equivalent circuit modeling of resonant tunneling diodes (RTDs). The approach is applicable to stabilized RTDs, and so enables the modeling of the negative differential resistance (NDR) region of the device's current-voltage (I-V) characteristics. Furthermore, a novel quasi-analytical procedure to determine all the equivalent circuit elements from the deembedded S-parameter data is developed. Extraction results of a 10 μm x 10 μm stabilized, low-current density RTD at different bias points show excellent fits between modeled and measured S-parameters up to 110 GHz.