Programmable optoelectronic dichroism has been demonstrated by quantum tailoring of Bi₂S₃ nanowire photodetectors, and multiplexing optical communications as well as polarimetric imaging have been developed.

Morphology-control, as a promising and effective strategy, is widely implemented to change surface atomic active sites and thus enhance the intrinsic electrocatalytic activity and selectivity. As a typical n-type semiconductor, a series of bismuth vanadate samples with tunable morphologies of clavate, fusiform, flowered, bulky, and nanoparticles were prepared to investigate the morphology effect. Among all the synthesized samples, the clavate shaped BiVO₄ with high index facets of (112), (301), and (200) exhibited reduced extrinsic pseudocapacitance and enhanced redox response, which is beneficial for tackling the sluggish voltammetric response of the traditional nanoparticle on the electrode surface. Benefiting from the large surface-active area and favorable ion diffusion channels, the clavate shaped BiVO₄ exhibited the best electrochemical sensing performance for paracetamol with a linear response in the range of 0.5–100 µmol and a low detection limit of 0.2 µmol. The enhanced electrochemical detection of paracetamol by bismuth vanadate nanomaterials with controllable shapes indicates their potential for applications as electrochemical sensors.

A Te/Si heterojunction photodetector array has been in situ constructed by performing pulsed-laser deposition of a Te nanofilm on a pre-patterned 2-inch SiO ₂ /Si wafer, exhibiting ultra-broadband photosensitivity from ultraviolet to infrared.

A hierarchical SnS/ZnIn ₂ S ₄ heterostructure with optical regulation and band tailoring is developed for high-performance broadband integrated optoelectronics.

Hydrogen (H₂) sensors are critical to various applications such as the situation where H₂ is used as the clean energy for industry or the indicator for human disease diagnosis. Palladium (Pd) is widely used as the hydrogen sensing material in different types of sensors. Optical fiber H₂ sensors are particularly promising due to their compactness and spark-free operation. Here, we report a Fabry–Pérot (FP)-cavity-based H₂ sensor that is formed with a freestanding Pd membrane and integrated on a conventional single-mode optical fiber end. The freestanding Pd membrane acts both as the active hydrogen sensing material and as one of the reflective mirrors of the cavity. When the Pd film absorbs H₂ to form PdH_x, it will be stretched, resulting in a change of the cavity length and thus a shift of the interference spectrum. The H₂ concentration can be derived from the amplitude of the wavelength shift. Experimental results showed that H₂ sensors based on suspended Pd membranes can achieve a detection sensitivity of about 3.6 pm/ppm and a detection limit of about 3.3 ppm. This highly sensitive detection scheme is expected to find applications for sensing low-concentration H₂.