In order to solve the problems of blocking the drainage ditch and reducing the soil flatness caused by soil accumulation when using compound planter with plowshare to ditch, a spiral soil separation mechanism (SSSM) is designed. The SSSM is analyzed. In order to obtain the optimal parameters of the SSSM, based on the discrete element method, the multifactor test is carried out with the embedded depth, pitch, and rotation speed of the spiral blade as the test factors and the soil separation distance and uniformity as the evaluation index. The optimal parameters are the embedded depth 49 mm, pitch 331 mm, and rotation speed of the spiral blade 318 r min⁻¹. The field experiment is carried out with these parameters, with soil separation distance 900 mm and standard deviation of soil height 7.8 mm, which is consistent with the simulation results. No blockage of drainage ditch was found, which shows that this device can effectively solve the problem. This study can provide a reference for the design of soil separation equipment using spiral soil separation device.

Fallow, a field where living plants are unplanted for a period, is continually implemented to accumulate moisture for the upcoming cultivation. However, there are less studies on the fallow strategies in one-crop-per-annum cropping system for coastal saline soils. In this study, 2-year “fallow + maize (Zea mays L.)” rotation experiments were carried out from 2016 to 2018 to assess how the mulching determine post-fallow soil moisture, salt distribution, and crop performance. Three treatments were designed, i.e., traditional cultivation without residue retention (TT), traditional tillage with total straw mulching during fallow (TT + SM), and no-till cultivation combined fallow mulching (NT + SM). After 2 years of fallow mulching with maize rotation, TT + SM reduced soil electrical conductivity (EC) and total salt of the upper 30 cm soil profile by 22.9% and 25.4% (p = 0.05), respectively, compared with the TT treatment. The results also indicate an improvement in volumetric soil water content (SWC) by 10.3%, soil organic matter (SOM) by 17.8%, and ultimately grain yield by 11.3% (p = 0.05) under the TT + SM treatment. Fallow mulching is recommended as an acceptable way to protect soil health in coastal fresh-starved or rain-fed farming practice.

Vacuum-insulated glazing (VIG) has excellent sound and heat insulation and anti-fogging properties, having been a typical structure–function-integrated glass deep processing product. However, overlapping, vacancy and excessive spacing distance of the supporting pillars will increase the concentrated stress for the glass substrate, raising the potential risk of failure. Therefore, this study, aiming to address the high cost of sample preparation and the multiple factors affecting stress distribution, developed a multi-objective design for supporting stress. In this paper, a multi-objective optimization model was designed based on comprehensive mechanical analysis under square-distributed supporting. The critical supporting pillars radius as well as the critical spacing distance were solved and met the strength requirement. Case simulation demonstrated that a 0.2 mm or more radius and a 63 mm or less spacing distance for the supporting pillars were acceptable placement methods which conformed to the design requirements. This research will act as a theoretical reference for future studies, promoting the in-depth development of VIG and exploration of high-strength safety products.