It is crucial to use a suitable dewatering technique to prevent land subsidence and substantial decreases in groundwater levels caused by the dewatering of groundwater during the construction of underground projects. Therefore, in this study, a generalized three-dimensional numerical model of groundwater flow was implemented for an underground station pit project. The dewatering efficiency of the coupled radial well-curtain method was investigated and compared with that of a traditional method. In addition, the influence of different structures and parameters (radial pipe diameter, conductance, number of radial pipes, and shaft drawdown) on the dewatering efficiency was assessed. The results showed the following: (1) radial wells caused less disturbance to the groundwater seepage field and extracted less groundwater during the dewatering process compared with pumping wells; (2) the structure and parameters of the radial wells positively correlated with the dewatering efficiency; (3) the curtain improved the dewatering efficiency, resulting in lower amounts of groundwater discharged and less disturbance to the groundwater flow field; and (4) the coupled radial well-curtain method is an efficient dewatering method that could effectively prevent the lowering of groundwater level outside the foundation pit, thus reducing the risk of land subsidence in the surrounding area.

Heavy metal pollution of groundwater will not only destroy the ecological environment but also negatively affect the functioning of the human liver. Tracing the source of groundwater pollution is an important way to protect groundwater resources. FloPy is promoting the use of big data in the groundwater field, especially in groundwater resource planning and management and contaminant traceability. This paper takes Mn as an example and codes a simulation-optimization model for solving the groundwater pollutant traceability problem using FloPy. The Bayesian optimization and strengthen elitist genetic algorithm (SEGA) algorithms are then used to optimize the hydraulic conductivity and pollutant sources in the study area. The results show that the model runs in 411 s, which is an acceptable amount of time spent, the slope of the fitted curve between the model-calculated water level and the actual observed water level is 0.914, and the contaminant traceability results can successfully locate the contaminant sources in real engineering problems. The numerical groundwater flow model and solute transport model can be quickly built, modified, and run by writing code, and can be easily and efficiently coupled with various optimization algorithms with FloPy.

The exploitation and utilization of shallow geothermal energy are of great significance to realizing China’s “double carbon” goal and promoting a green economy and social development. However, many projects using ground source heat pumps to exploit shallow geothermal energy have disrupted the thermal balance of the geothermal field due to insufficient preliminary research, affecting the sustainable utilization of shallow geothermal energy. Therefore, a 3D groundwater–thermal coupling model was established in this paper using the geotemperature data of a ground source heat pump system in Xi’an. This study investigated the response characteristics of the groundwater–thermal system to the ground source heat pump system using the numerical simulation method and discussed the optimal layout scheme of the system on this basis. After years of simulation, it was found that long-term operation of the ground source heat pump system under actual operation produces “cold accumulation”. In addition to artificial intervention of the groundwater flow field, the effects of the system operating parameters and layout settings are also investigated to alleviate this cold accumulation. The results show that changing the operating parameters so that the heat transfer is the same in winter and summer, cross-locating the cooling holes with the heating holes, and placing multiple pumping and recharge wells downstream can alleviate the cold accumulation in the heat exchange zone. The results of this numerical simulation study provide an important reference for solutions to mitigate the accumulation of ground cold and heat in developing shallow geothermal energy using borehole heat exchangers and to suppress the downstream geotemperature disturbance via the ground source heat pump system.