Pietro Mazzei

Mr. Pietro Mazzei

University of Naples Federico II, Naples, Campania, Italy
orcid
PhD Researcher

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2020 in Fluids
Verified
Journal Article
Open access
PDF file
MOMicaela Olivetti
Micaela Olivetti
FMFederico Giulio Monterosso
Federico Giulio Monterosso
GMGianluca Marinaro
Gianluca Marinaro
Emma FrosinaEmma Frosina
Emma Frosina
PMPietro Mazzei
Pietro Mazzei
The objective of this paper is to show how a completely virtual optimization approach is useful to design new geometries in order to improve the performance of industrial components, like valves. The standard approach for optimization of an industrial component, as a valve, is mainly performed with trials and errors and is based on the experience and knowledge of the engineer involved in the study. Unfortunately, this approach is time consuming and often not affordable for the industrial time-to-market. The introduction of computational fluid dynamic (CFD) tools significantly helped reducing time to market; on the other hand, the process to identify the best configuration still depends on the personal sensitivity of the engineer. Here a more general, faster and reliable approach is described, which uses a CFD code directly linked to an optimization tool. CAESES® associated with SimericsMP+® allows us to easily study many different geometrical variants and work out a design of experiments (DOE) sequence that gives evidence of the most impactful aspects of a design. Moreover, the result can be further optimized to obtain the best possible solution in terms of the constraints defined.

27 June 2023 in Fluids
Verified
Journal Article
Open access
PDF file
PMPietro Mazzei
Pietro Mazzei
Emma FrosinaEmma Frosina
Emma Frosina
ASAdolfo Senatore
Adolfo Senatore
This research presents a comparison between two numerical approaches developed and later compared for studying External Gear Pumps (EGPs). Models have been developed for studying pumps with helical gears. Firstly, a three-dimensional (3D) CFD numerical model has been built using a commercial code. Then, a new tool called EgeMATor MP+, completely developed by the authors and capable of completely simulating this pump’s typologies is presented. Thanks to different subroutines developed in different interconnected environments, this tool can fully analyze those pumps, starting from the drawing. Both numerical approaches have been detailed, highlighting their strengths and weaknesses and the tweaking required to reach more accurate results. Both numerical models have been set up with the same boundary conditions to obtain a more accurate comparison. Comparisons have been performed using tests performed on a commercial pump taken as reference, focusing on steady-state volumetric performance as well as the transient features of the outlet port pressure oscillations. The comparison of the (Q,p) characteristics showed that the 3D CFD numerical model has a slightly better accuracy, but both models have errors that fall into the uncertainty range of the experimental measurements. In addition, the pressure ripples comparison verified good agreements, where also the double flank behavior of the pump is predicted. While comparing the two simulation approaches, the paper highlights the limits and strengths of each one of the two approaches. In particular, it is shown how both models can match the experimental results considering proper assumptions. The paper constitutes a unique contribution to the field of numerical simulation of EGPs and represents a useful reference to designers looking for suitable methods for simulating existing or novel design solutions.

26 October 2023 in Actuators
Verified
Journal Article
Open access
PDF file
Abid Abdul AzeezAbid Abdul Azeez
Abid Abdul Azeez
PMPietro Mazzei
Pietro Mazzei
Tatiana MinavTatiana Minav
Tatiana Minav
Emma FrosinaEmma Frosina
Emma Frosina
ASAdolfo Senatore
Adolfo Senatore
The external gear pump, like any other hydraulic component, is vulnerable to failure, which may lead to downtime as well as the failure of other components linked to it, thereby causing production loss. Therefore, establishing a condition monitoring system is crucial in identifying failure at an early stage. Traditional condition monitoring approaches rely on experimental data that are collected by means of sensors. However, the sensors utilized in the experiments may have calibration issues, which lead to inaccurate measurements. The availability of experimental data is also limited as it is difficult and expensive to create and detect a fault in a component. Hence, it is essential to develop a simulation model that mimics the performance of the actual system. The data generated from the model can be utilized to create the data source required for automated condition monitoring. A new methodology based on a detailed geometric model for simulating the External Gear Pump is described and compared to two models analyzed in the authors’ previous work, namely Schlosser’s loss model and simple geometric model. In this paper, the three models are compared with experimental data and the method utilized for fault injection. Schlosser’s loss model, as well as the detailed geometric model, are found to be suitable in terms of validation; however, the latter is a better candidate in terms of fault injection. Hence, the detailed geometric model can be implemented as a tool to generate the data source for condition monitoring applications.

1 January 2024
Verified
Conference Paper
Open access
PDF file
PMPietro Mazzei
Pietro Mazzei
Emma FrosinaEmma Frosina
Emma Frosina
SBSimone Bulleri
Simone Bulleri
ASAdolfo Senatore
Adolfo Senatore
External Gear Pumps (EGPs) are positive displacement machines with excellent performances and very competitive costs. A particular typology of EGPs is Helical Gear Pump, where the teeth present an inclination along the axial direction, permitting a progressive meshing with consequent lower vibration and noise emission. Three-dimensional CFD numerical analysis of these pumps has proven to be quite complex. More recently some analyses have been proposed however, to obtain realistic results, approximations regarding the helical angle along the axial dimension have been applied. Those models consisted of a high number of grid cells, leading to high computational time request. In this article, it is explored the use of a novel CFD approach through the use of the commercial code Simerics MP+, already used with success by the research group. This new method permits to evaluate the geometry of the pump without any geometrical approximation, leading to more accurate results and less computational time required if compared with other 3D-CFD tools. An accurate numerical model has been built up on a reference pump with helical gears; the model has been then compared with the results of an experimental campaign. Finally, a new design of the pressure relief grooves inside the wear plates has been investigated and simulated with the objective of reducing the fluid-borne noise emission, as well as to improve the volumetric efficiency of the pump and to reduce the flow ripple fluctuation, pressure spikes and crossflow optimization.

1 January 2024
Verified
Conference Paper
Open access
PDF file
PMPietro Mazzei
Pietro Mazzei
Emma FrosinaEmma Frosina
Emma Frosina
SBSimone Bulleri
Simone Bulleri
ASAdolfo Senatore
Adolfo Senatore
External gear pumps are a type of positive displacement machines that combine excellent performances with very competitive costs. These characteristics unfold the necessity of tools to accurately simulate their performance. In this article, a numerical methodology based on a lumped parameter approach has been developed for helical External Gear Pumps (EGPs). The methodology is based on the usage of a tool, that, starting from the pump drawing, thanks to different subroutines developed in different interconnected environments, allows to fully analyze EGPs with Helical. The tool is based on a tool called EgeMATor developed by the research group for spur gears and described in a precedent works [1]. The tool has been further expanded in its functionality and optimized becoming EgeMATor MP+. Indeed, the new release has been expanded not only to include helical gears but also to simulate the bearings' reaction and consequently the gears' eccentricity variations. Results obtained from the simulations have been compared with data obtained thanks to an experimental campaign carried on a series of reference pumps done to further validate the numerical model and the new implemented functionalities. Then, a new methodology that, for a defined tooth gears profile, is able to automatically obtain an optimized design of the pressure relief grooves of the wear plate has been studied. This methodology, through a flow ripple fluctuation, pressure spikes and crossflow optimization based on geometric assumptions, has the objective to characterize a design that permits to improve the volumetric efficiency as well as to reduce the fluid-borne noise emission of the pump analyzed.