Yi Zhou

Mrs. Yi Zhou

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 June 2022 in Journal of Applied Polymer Science
Verified
Journal Article
Open access
YZYi Zhou
Yi Zhou
CMConnor Myant
Connor Myant
RSRebecca Stewart
Rebecca Stewart
Sensors based on electronic textiles (e‐textiles) have become increasingly prominent in the field of biomechanical monitoring technology due to multiple properties such as being lightweight, flexible, and comfortable, with increasing potential in incorporating into long‐term monitoring devices. Previous research has been conducted into textile strain sensors based on graphene for human motion monitoring, however most graphene e‐textile strain sensors exhibit poor sensitivity and stretchability. To our knowledge, no previous research has looked at knitted graphene‐based fabrics in regards to the fabric composition of the substrate. In this paper, we propose a graphene/fabric composite sensor using a cost‐effective dip coating method of an acrylic/Spandex knit fabric, and further explores its mechanical, electrical, and sensing properties. The developed graphene/textile composite sensor has a wide sensing range (up to 344%) and exhibits a good sensitivity with a high gauge factor of up to 16. As a wearable sensor, our sensing fabric can detect both large and subtle human motions and is able to distinguish between various ranges of joint movements, demonstrating its ability to function as a human motion monitoring system. Our sensor further exhibits the ability to be used as a supercapacitor or capacitive pressure sensor.

7 September 2022 in Polymers for Advanced Technologies
Verified
Journal Article
Open access
YZYi Zhou
Yi Zhou
RSRebecca Stewart
Rebecca Stewart
Flexible strain sensors have attracted considerable attention due to their applications in wearable monitoring fields such as human‐computer interaction systems, athletic training, and health systems. Textiles are a desired substrate for fabricating wearable flexible sensors due to their light weight, comfort, and flexibility. However, the compatibility between textiles and conductive materials still faces critical challenges, especially for wearable sensors to achieve high sensitivity and a wide sensing range simultaneously with long‐term monitoring stability, reliability, and wearing comfort. In this study, we propose a graphene‐based TPU/textile composite sensor that can be produced using small‐scale manufacturing techniques, using laser cutting combined with film coating and thermal transfer processes and further explore its mechanical, electrical, and sensing properties. Since the human body exhibits different magnitudes of motion and fabric sensors integrated into clothing would face multiple challenges in real world usage e.g. repetitive wear, sweat and sunlight exposure, we performed sensitivity, reliability and durability tests to further evaluate real world usage of the fabric sensors. The developed composite sensor exhibits a high sensitivity (GF = 498), wide sensing range (0%–293%), excellent reliability and stability which only shows 5% deviation after 10,000 cycles of stretching under 5% strain. In addition, the graphene‐based textile composite sensor thermalised by TPU film can also maintain high stability after long‐term UV irradiation and multiple washing cycles. When integrated into various wearable devices, our composite sensor can detect a wide range of human body motions accurately, as well as subtle physiological signals, exhibiting great potential in incorporating into wearable monitoring devices.

2 June 2024 in Advanced Intelligent Systems
Verified
Journal Article
Open access
YZYi Zhou
Yi Zhou
YSYilin Sun
Yilin Sun
YLYangfangzheng Li
Yangfangzheng Li
CSCheng Shen
Cheng Shen
ZLZhiyuan Lou
Zhiyuan Lou
RSRebecca Stewart
Rebecca Stewart
Flexible strain sensors based on textiles have attracted extensive attention owing to their light weight, flexibility, and comfort when wearing. However, challenges in integrating textile strain sensors into wearable sensing devices include the need for outstanding sensing performance, long‐term monitoring stability, and fast, convenient integration processes to achieve comprehensive monitoring. The scalable fabrication technique presented here addresses these challenges by incorporating customizable graphene‐based sensing networks into knitted structures, thus creating sensing sleeves for precise motion detection and differentiation. The performance and real‐world application potential of the sensing sleeve are evaluated by its precision in angle estimation and complex joint motion recognition during intra‐ and intersubject studies. For intra‐subject analysis, the sensing sleeve only exhibits a 2.34° angle error in five different knee activities among 20 participants, and the sensing sleeves show up to 94.1% and 96.1% accuracy in the gesture classification of knee and elbow, respectively. For inter‐subject analysis, the sensing sleeve demonstrates a 4.21° angle error, and it shows up to 79.9% and 85.5% accuracy in the gesture classification of knee and elbow, respectively. An activity‐guided user interface compatible with the sensing sleeves for human motion monitoring in home healthcare applications is presented to illustrate the potential applications.

12 September 2022 in RSC Advances
Verified
Journal Article
Open access
PDF file
YFYuanyuan Feng
Yuanyuan Feng
RCRui Cai
Rui Cai
YZYi Zhou
Yi Zhou
ZHZonghao Hu
Zonghao Hu
YWYanlong Wang
Yanlong Wang
Qingshi MengQingshi Meng
Qingshi Meng
Flexible, lightweight sensors with a wide strain-sensing range are showing increasing significance in structural health monitoring compared with conventional hard sensors, which typically have a small strain range, are heavyweight, and have a large volume. In this work, salt particle precipitation and mechanical coating methods are used to fabricate porous graphene nanoplatelet (GNP)/polydimethylsiloxane (PDMS) flexible sensors for tension monitoring in structural health applications. The signal transformation through the Back Propagation (BP) algorithm is integrated to provide monitoring data that are comparable with other sensors. The results reveal that the flexible sensors with a low content of GNPs (0.1–0.25 wt%) possess better flexibility, allowing tensile strains over 200% to be measured. In addition, due to the enhanced deformation capacity of the pore structures, they can achieve high sensitivity (1–1000) under 65% strain, and a fast response time (70 ms) under 10% strain at 60 mm min−1. They also show high performance in the fatigue test (20 000 cycles) under 5% strain, and can effectively respond to bending and torsion. In addition, the sensors show an obvious response to temperature. Overall, the prepared flexible composite sensors in this work have the advantages of a wide strain-sensing range, a full-coverage conductive network, and being lightweight, and show potential for structural health monitoring in the near future.

1 July 2024
Verified
Conference Paper
Open access
MWMingke Wang
Mingke Wang
YZYi Zhou
Yi Zhou
RSRebecca Stewart
Rebecca Stewart
Soft wearable robotics presents an opportunity to bridge robotics and textiles, offering lightweight, flexible, and ergonomic solutions for human-robot interaction, but previous studies on wearable soft robotics primarily focus on actuator performance without also considering wearability and interactivity. A rudimentary attachment method is usually adopted using external fixation devices such as straps to attach actuators to the user’s body, resulting in a poor wearing experience. This study focus on compatible and compact textile architectures to support actuators to be seamlessly integrated into daily wearing. It presents a research-through-design method to propose innovative knitting-integrated approaches for pneumatic actuator design to provide soft wearable robots with both aesthetic and functional values. Through a series of tests in which various knitting techniques and parameters are used to create sleeves that house silicone actuators, it explores design possibilities and understands the complex relationships between textiles and actuators. The findings contribute to advancing soft wearable robotics by offering practical solutions for integrating pneumatic actuators seamlessly into wearable textiles, thereby unlocking new possibilities for human-centered robotic systems.

13 August 2025 in Advanced Electronic Materials
Verified
Journal Article
Open access
YZYi Zhou
Yi Zhou
JRJohn Ratcliffe
John Ratcliffe
EMErika Molteni
Erika Molteni
APAshay Patel
Ashay Patel
JLJingqi Liu
Jingqi Liu
WLWei Liu
Wei Liu
Loneliness is a critical issue among older people and poses a significant risk factor for various physical and mental health conditions. While recent wearable technologies can monitor behavioral and physiological changes associated with loneliness, existing solutions such as accelerometers and inclinometers often lack comfort and flexibility for long‐term monitoring. Smart textile systems offer a viable solution for continuous monitoring by integrating sensors and conductive materials into textiles. However, there remains a critical technological gap that no existing solution integrates multimodal textile‐based sensing specifically for loneliness detection. This review addresses that gap by providing a comprehensive review of smart textile technologies for monitoring loneliness in older people, highlighting sensing and design innovations to meet the needs of older users. Key behavioral patterns and physiological symptoms associated with loneliness are explored and suitable wearable sensing technologies, focusing on textile‐based solutions that combine comfort, flexibility, and monitoring accuracy, are reviewed. In addition, current advances in data collection, transmission, and analysis are examined for smart textile systems, exploring their potential and challenges in the field of elderly care. By identifying specific design requirements and challenges for monitoring loneliness in older people, this review lays the foundation for future research and development of proactive loneliness detection and intervention.