The objective of the present study is to analyze the heat transfer in the gate-all-around (GAA) MOSFETs based on the Cattaneo and Vernotte (CV) model due to the finite heat propagation speed in these nanodevices. The derivation of the CV model from the Boltzmann transport equation (BTE) is presented. Using the finite-element method, the nonlinear heat conduction model coupled with Poisson and continuity equations has been numerically solved to predict the self-heating effect (SHE) in GAA MOSFET. The CV model is applied in several structures, namely, single-metal surrounding gate (SMSG), dual-metal surrounding gate (DMSG), and triple-metal surrounding gate (TMSG). The obtained results are also compared with those calculated with the Fourier law. The temporal evolution and spatial distribution of the temperature and heat flux have been investigated. It is seen that the oscillatory behavior of the temperature using the CV model is strengthened for the TMSG structure and by increasing the relaxation time. Furthermore, the TMSG structure leads to an important increase in the temperature inside the device.
10 August 2020 in IEEE Transactions on Electron Devices
In this article, we propose a 2-D study for investigating the self-heating effect in new partially insulated field-effect transistors (PiFETs) based on high-k gate dielectrics. The thermal properties have been numerically simulated and compared to those of conventional bulk-metal-oxide-semiconductor field-effect transistor (bulk-MOSFET) and PiFET structures. Several high-k materials such as ZrO₂, HfO₂, La₂O₃, and Al₂O₃ are used in order to test their impact on the temperature rise in the host lattice of new structures. A deal of interest has been paid to geometric parameters in the PiFET structures studied to further reduce the self-heating. The effects of geometrical and electrical parameters have been analyzed. As it is found, a significant reduction in temperature rise is achieved during high-power operation. This suggests that the insertion of high-k dielectric layers above the dioxide can mitigate the self-heating. More especially, Al₂O₃ has been revealed as an appropriate high-k dielectric to being recommended for the production of high-performance PiFET.
21 January 2024 in Case Studies in Thermal Engineering
Trap density refers to the density of electronic trap states within dielectric materials that can capture and release charge carriers (electrons or holes) in a semiconductor channel, affecting the transistor’s performance. This study aims to investigate the influence of trap density on the electrothermal behavior of nanowire gate-all-around GAAFET devices. The numerical solution of Poisson’s equations and continuity equations, coupled with the heat conduction model, has been used to predict the temperature inside the GAAFET device. The finite element method has been used to discretize the semiconductor equations. Investigations have been carried out on a number of physical and geometric parameters, such as oxide thickness, nanowire radius, and gate length. Their effects on output characteristics and device temperature have been discussed. A thinner oxide thickness, lower device radius, and longer channel length led to a higher current flow. Results also reveal that high trap densities can have significant impacts on the degradation of electronic devices, particularly in the context of semiconductor devices like transistors.
23 June 2022 in Journal of Computational Electronics