A disposable copper-plated screen-printed carbon electrode (CuSPE) was developed for the determination of hydrogen peroxide by flow injection analysis (FIA) at ambient temperature without deoxygenation. Cyclic voltammetry on the CuSPE in pH 7.4 phosphate buffer solution showed the growth of CuO and Cu2O. A well-defined reduction signal corresponding to the mediation of CuO and Cu2O occurred in the presence of hydrogen peroxide. The mechanistic study revealed that the reduction is a coupled-chemical reaction mechanism with the operation of pseudo-first order kinetics with respect to the concentration of Cu2O. The calculated electrochemical rate constant (ke) from Laviron’s model is 13.7 s−1. Systematic investigations were made to optimize the experimental parameters for hydrogen peroxide detection by FIA. With a poised potential of −0.3 V versus Ag/AgCl and a flow rate of 2 ml min−1, the calibration curve was found to be linear up to 200 μM hydrogen peroxide with a detection limit of 0.97 μM (S/N = 3). The CuSPE is fairly stable for repetitive measurements.
A disposable copper nanoparticle-plated screen-printed carbon electrode (designated as Cun-SPE100-nm) provides a new material for the determination of native amino acids. All 20 underivatized amino acids can be sensitively determined at 0.0 V vs. Ag/AgCl in pH 8 phosphate buffer solution. The precisely controlled copper nanoparticles can boost up the CuIIO/CuI2O redox signal on the working surface without any prior pretreatment procedure. The formation of a reversible 1:1 CuIIO–amino acid complex on the Cun-SPE100-nm was proposed to play a key role in the reaction mechanism. Stable detection responses were obtained for all amino acids by flow injection analysis with detection limits (S/N = 3) that lie in the range of 24 nM–2.7 µM. Selected amino acids from six representative chemical natures were separated by HPLC and detected at the Cun-SPE100-nm with promising results.