This paper summarises a little over 100 years of research on the synthesis and the photophysical and biological properties of 1H-pyrazolo[3,4-b]quinolines that was published in the years 1911–2021. The main methods of synthesis are described, which include Friedländer condensation, synthesis from anthranilic acid derivatives, multicomponent synthesis and others. The use of this class of compounds as potential fluorescent sensors and biologically active compounds is shown. This review intends to summarize the abovementioned aspects of 1H-pyrazolo[3,4-b]quinoline chemistry. Some of the results that are presented in this publication come from the laboratories of the authors of this review.

New 6-CF₃-1H-pyrazolo[3,4-b]quinolines with a methyl and/or phenyl group attached to the pyrazole core (Molx (x = 1, 2, 3, 4)) were synthesized and characterized in terms of their optoelectronic applications: photovoltaic and electroluminescence. The fluorescence emissions of the investigated phenyl-decorated pyrazoloquinolines is caused by the photoinduced charge transfer p process occurring between the phenyl substituent and the pyrazoloquinoline core, while 1,3-dimethyl-6-CF₃-1H-pyrazolo[3,4-b]quinoline exhibits an π,π*-type emission. The number of phenyls and their substitution positions modulate both emission properties and HOMO energy levels. Next, the bulk heterojunction BHJ solar cells based on 1H-pyrazolo[3,4-b] quinoline derivatives with architecture ITO/PEDOT:PSS/PDT + Molx/Al were fabricated. The organic active layer was a blend of Molx and poly(3-decylthiophene-2,5-diyl). The complex refractive index and the layer thickness of the organic solar cells were determined using a spectroscopic ellipsometer Woollam M2000 (J.A. Woollam Co., Inc., Lincoln, NE, USA) and CompleteEASE software. For solar devices with the best value of power efficiency of approximately 0.38%, the thickness of the active layer (Mol3 + PDT) was 111 nm, with a short-circuit current density of J_SC = 32.81 μA/cm² and an open–circuit voltage of V_OC = 0.78 V. Finally, we demonstrated double-layer light-emitting diodes with an organic active layer (Molx + PVK) and an electron transporting material layer, ETM (2-[3,5-bis(4-phenyl-2-quinolyl)phenyl]-4-phenylquinoline (Tris-Q). Bright bluish-green light originating from the active layer was observed in the double-layer device, ITO/PEDOT:PSS/active layer/ETM/Ca/A. The active layer was a mixture of PV-doped 1H-pyrazolo[3, 4-b]quinoline dyes. An OLED device was constructed by employing Molx as an emitter, which gave a deep bluish-green emission with the spectra range of 481–506 nm. The best value of the maximum brightness at approximately 1436.0 cd/m2 was achieved for a diode based on Mol3 (1-phenyl-3-phenyl-6-CF₃-1H-pyrazolo[3,4-b]quinoline) and [R¹ = Ph, R³ = Ph and R⁶ = CF₃]. The current efficiency was up to 1.26 cd/A at 506 nm with a CIE of 0.007, 0.692.

Starch is a natural polysaccharide for which the technological quality depends on the genetic basis of the plant and the environmental conditions of the cultivation. Growing plants under cover without soil has many advantages for controlling the above-mentioned conditions. The present research focuses on determining the effect of under cover hydroponic potato cultivation on the physicochemical properties of accumulated potato starch (PS). The plants were grown in the hydroponic system, with (greenhouse, GH) and without recirculation nutrient solution (foil tunnel, FT). The reference sample was PS isolated from plants grown in a tunnel in containers filled with mineral soil (SO). The influence of the cultivation method on the elemental composition of the starch molecules was noted. The cultivation method also influenced the protein and amylose content of the PS. Considering the chromatic parameters, PS-GH and PS-FT were brighter and whiter, with a tinge of blue, than PS-SO. PS-SO was also characterized by the largest average diameters of granules, while PS-GH had the lowest crystallinity. PS-SO showed a better resistance to the combined action of elevated temperature and shear force. There was a slight variation in the gelatinization temperature values. Additionally, significant differences for enthalpy and the retrogradation ratio were observed. The cultivation method did not influence the glass transition and melting.