Zhen Zhao

Zhen Zhao


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2022 in Water
Verified
Journal Article
Open access
PDF file
YLYude Lei
Yude Lei
ZZZhen Zhao
Zhen Zhao
保Z保建 ZHANG
保建 ZHANG
AMAnt Met
Ant Met
YLYinfei Luo
Yinfei Luo
DZDailei Zhang
Dailei Zhang
There are 30 carbonate hot springs in Yaoshuitan geothermal field, Xining Basin, China, with a temperature of 18~41.5 °C; and there are 10 carbonate hot springs in Qijiachuan geothermal field, with a temperature of 10~19.5 °C. Both geothermal fields are carbonate hot springs containing large amounts of CO2 gas. In order to reveal the origin of the carbonated hot springs in Yaoshuitan and Qijiachuan of Xining Basin, this paper offers a comprehensive study of the regional deep geology, tectonic setting, total analysis of carbonated hot springs, δ2H, δ18O, δ13C isotopes, main gas composition, and geochemical characteristics of travertine dating, travertine δ13C, and rare earth elements. The geological process of carbonated hot spring formation and the evolution of H+ content from deep to shallow is revealed, and the genetic mechanism of the carbonated hot spring in Xining Basin is systematically summarized. The results show that: (1) The characteristics of δ2H and δ18O isotopes indicate that the recharge source of carbonated thermal water springs in Xining Basin is mainly atmospheric precipitation. The age of carbonated thermal water springs at 14C is more than 20 ka, indicating that some of them may come from deep fluid (gas) sources. The R/Ra in carbonated thermal water springs is mostly less than 1, indicating that the helium in geothermal water is mainly crustal source helium, and there is no deep mantle source material. (2) The Piper three-plot indicates that the direction of groundwater evolution from the recharge area at the edge of Xining Basin to Yaoshuitan and Qijiachuan carbonated thermal water spring area near the edge of the basin is opposite to the normal path of groundwater evolution in the basin, which is due to the large amount of CO2 gas mixed in the deep fault along the northern margin of Laji Mountain. The ratio of (Ca2+ + Mg2+) and (HCO3− + SO42−) in the Potan and Qijiachuan carbonated thermal water springs is close to 1, and the ratio of (Na+ + K+)/HCO3− is less than 1. It indicates that the chemical composition of the Yaoshuitan carbonated thermal water spring and the Qijiachuan carbonated thermal water spring in Xining Basin is dominated by the dissolution of calcite, dolomite, and gypsum in deep carbonate reservoirs, supplemented by the dissolution of silicate minerals. The relationship between the volume fraction of CO2 and the δ13C value of carbon isotope of CO2 indicates that the source of CO2 is inorganic, which is mainly formed by metamorphism and decomposition of deep carbonate and marble. The δEu < 1 and δCe > 1 of the rare earth elements in the calcium center of the carbonated thermal water springs indicate that the groundwater supplying the travertine material has been in the acidic environment receiving CO2 from the deep crust for a long time. (3) A series of tectonic activities, such as late collision and post-collision between the Indian and Eurasian plates, has led to the uplift, asthenosphere upwelling, and thermal invasion of the northern Tibetan Plateau and other deep dynamic processes. The deep faults in the northern margin of the Laji Mountain and other deep faults with obvious neotectonic activity have provided channels for the up-invasion of deep thermal materials, and local geothermal anomalies were formed near the deep faults. The hidden carbonate rocks and silicate rocks with large thickness undergo thermal metamorphism under high temperature and high pressure in the deep geothermal anomaly area and form a large amount of CO2, which is dissolved in water and enhances the acidity of water. At the same time, the dissolution reaction of acidic water to carbonate rocks consumes H+, which keeps the carbonated thermal water spring weakly acidic. (4) The composition of travertine in carbonated thermal water springs is dominated by calcite, indicating that travertine may be formed in a deep geological environment with a temperature of 150~200 °C, indicating that there are abnormal heat sources in shallow carbonate strata with a burial depth of 3000~4000 m. The abnormal heat source may be caused by the deep fault in the northern margin of Laji Mountain, as well as other deep and large faults channeled in the deep crust and mantle heat source, indicating that the deep fault in the northern margin of Laji Mountain has an obvious heat-controlling effect, and there is a good prospect of geothermal resources exploration near the fault.

6 May 2021 in Energies
Verified
Journal Article
Open access
PDF file
ZZZhen Zhao
Zhen Zhao
GQGuangxiong Qin
Guangxiong Qin
YLYinfei Luo
Yinfei Luo
SGSonghe Geng
Songhe Geng
LYLinchao Yang
Linchao Yang
Liang ZhangLiang Zhang
Liang Zhang
The Xining Basin in Qinghai Province, China, is rich in mid–low temperature geothermal resources, but the reinjection of geothermal water has not yet started. In this paper, the physical properties of rocks sampled from the newly drilled geothermal well DR2018 were analyzed, and a series of core flooding experiments was conducted to assess the formation blockage risk during water reinjection. The experimental results show that the geothermal reservoir has a low porosity of 1.64–18.68% and a low permeability of 0.04–7.23 md. The rocks are weakly consolidated, and the movable clay and sand particles account for 0.18–23.42 wt %, which results in a significant rate and salinity sensitivity. Even at low water flow velocity of 0.31–1.64 cm/min, the core permeability will drop by 35–53% after 25-144PV injection. An obvious fluctuation and decline in core permeability can also be observed as the injected water salinity decreases. The blockage risk induced by the invasion of low-content scaling and suspended particles in injected water can be covered up by the migration of movable particles in cores. The particle migration and blockage in the near-wellbore formation will be the main reason to cause the decline in the well’s geothermal reinjection capacity.

21 August 2025 in Energies
Verified
Journal Article
Open access
PDF file
ZZZhen Zhao
Zhen Zhao
XZXinkai Zhan
Xinkai Zhan
BYBaizhong Yan
Baizhong Yan
GQGuangxiong Qin
Guangxiong Qin
YYYanbo Yu
Yanbo Yu
To enhance the development efficiency of medium–deep geothermal resources in cold regions, this study focuses on a coaxial borehole heat exchanger (CBHE) located in Dapuzi Town, Xining City, Qinghai Province. Based on field-scale heat exchange experiments, a three-dimensional numerical model of the CBHE was developed using COMSOL Multiphysics 6.2, incorporating both conductive heat transfer in the surrounding geological formation and convective heat transfer within the wellbore. The model was calibrated and validated against measured data. On this basis, the effects of wellhead injection flow rate, injection temperature, and the thermal conductivity of the inner pipe on heat exchange performance were systematically analyzed. The results show that in cold regions with high altitudes (2000–3000 m) and medium–deep low-temperature geothermal reservoirs (68.8 °C), using a coaxial heat exchange system for space heating delivers good heat extraction performance, with a maximum average power output of 282.37 kW. Among the parameters, the injection flow rate has the most significant impact on heat extraction. When the flow rate increases from 10 m3/h to 30 m3/h, the heat extraction power increases by 57.58%. An increase in injection temperature helps suppress thermal short-circuiting and improves the effluent temperature, but excessively high temperatures lead to a decline in heat extraction. Additionally, increasing the thermal conductivity of the inner pipe significantly intensifies thermal short-circuiting and reduces overall heat exchange capacity. Under constant reservoir conditions, the thermal influence radius expands with both depth and operating time, reaching a maximum of 10.04 m by the end of the heating period. For the CBHE system in Dapuzi, maintaining an injection flow rate of 20–25 m3/h and an injection temperature of approximately 20 °C can achieve an optimal balance between effluent temperature and heat extraction.

29 December 2025 in Water
Verified
Journal Article
Open access
PDF file
ZZZhen Zhao
Zhen Zhao
XCXianghui Cao
Xianghui Cao
GQGuangxiong Qin
Guangxiong Qin
YZyuejun zheng
yuejun zheng
SSShuai Song
Shuai Song
WLWenpeng Li
Wenpeng Li
For an alpine inland river basin affected by climate change, the interaction between groundwater (GW) and surface water (SW) within the watershed plays a crucial role in water resource management. To explore the bidirectional dynamic coupling of surface water and groundwater, this work adopted the extensively employed SWAT–MODFLOW model. Results indicate that statistical parameters including R2 (0.81 for calibration periods and 0.79 for validation), NSE (0.79 for calibration periods and 0.75 for validation), RMSE (0.59~1.25 m), and PBIAS (15.21%) demonstrate the dependability of the SWAT–MODFLOW model in evaluating groundwater–surface water exchange processes within alpine inland river basins. Long-term monitoring data show that groundwater levels exhibited an upward trend, rising from 2895.35 m in 2005 to 2906.75 m in 2022. Notably, since 2018, groundwater levels have entered a period of being consistently above the long-term average. In terms of spatial distribution, the groundwater level patterns in 2005, 2010, and 2015 remained relatively consistent, marked by a west-to-east decreasing gradient. However, by 2020, this spatial distribution pattern shifted, marked by an east-to-west decreasing gradient. Meanwhile, our results reveal a pattern of upstream surface water recharge, bidirectional fluctuation in the middle reaches, and downstream groundwater-dominated recharge during the period of 2000~2023. During the 2000–2009 period, groundwater in sub5 received recharge from surface water, with the exchange rate ranging from −4987.75 to −374.82 m3/d. Conversely, during 2010–2023, groundwater in sub5 discharged into surface water, with the exchange rate ranging from 1136.75 to 56,646.56 m3/d. Moreover, there is seasonal variability in the SW–GW interchange relationship. In spring and summer, surface water primarily replenishes groundwater, whereas in autumn and winter, groundwater primarily replenishes surface water. This study provides a foundational method for assessing groundwater–surface water interactions in alpine inland river basins, which will contribute to the evaluation and management of local water resources.

19 February 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
ZZZhen Zhao
Zhen Zhao
GQGuangxiong Qin
Guangxiong Qin
BYBaizhong Yan
Baizhong Yan
CHChuanlong Han
Chuanlong Han
Geothermal resources are considered a clean energy source, and their development plays a key role in achieving sustainable development. This energy contributes to environmental protection, energy security, and economic growth, while also helping to alleviate energy poverty. Qinghai Province, rich in geothermal resources, holds significant potential for development. First, this study evaluated the geothermal resources in the uplifted mountainous regions of Qinghai Province using the volumetric method and analyzed their spatial distribution. Next, the degree of geothermal resource endowment was measured, and the relationship between geothermal resources and industrial structure was analyzed. Finally, the Vector Autoregression (VAR) model and impulse response function were applied to assess the impact and duration of geothermal resources on changes in the industrial structure from 2000 to 2020. Geothermal resources in Qinghai Province exhibit significant regional variation, with the northern and western regions being particularly rich in geothermal resources, peaking at 3.58 × 1017 J in Banma County. Geothermal resources in Qinghai are predominantly utilized for power generation, averaging 42.20% of energy consumption. The interplay between geothermal resource use and industrial structure is intensifying, notably in secondary and tertiary sectors. Initially restrictive, the influence of industrial structure on geothermal resource use is projected to become facilitative as clean energy technologies advance. This study revealed the relationship between geothermal resources and the local industrial structure in Qinghai Province, providing a scientific basis for the sustainable and efficient development and utilization of these resources. It contributed to the long-term sustainability of geothermal resource exploitation.

20 September 2021 in Journal of Advanced Computational Intelligence and Intelligent Informatics
Verified
Journal Article
Open access
HWHe WangYong
He WangYong
SLSanqiu Liu
Sanqiu Liu
ZZZhen Zhao
Zhen Zhao
KJKui Jie
Kui Jie
Aiming at a high-precision tracking performance of the control of a machine tool moving axis, this study established a system mathematical model considering the elastic deformation of the ball screw. Then, a sliding mode controller was designed to suppress the influence of uncertainty on the control performance. Next, an extended state observer was designed to observe the system state and disturbance and provide feedback to the sliding mode controller for position control. Finally, the correctness of the designed sliding mode control and extended state observer were proved by MATLAB simulation analysis.