One class of maraging steels are strengthened by a combination of β-NiAl and η-Ni3Ti intermetallic phases which are precipitated during an aging heat treatment. To establish a meaningful structure-property relationship the precipitation strengthening effect from each phase must be isolated from the other strengthening mechanisms. To achieve this, a series of model alloys based on the Fe-12Ni alloy system were aged and characterized to determine the precipitation strengthening effect. In the course of this study, using a new approach, atom probe tomography was used to determine the spacing between precipitates and to calculate the individual strength contribution of the β and the η phase using a model describing the precipitate-dislocation interactions. It was found that the precipitation strengthening of the combined β and η phases is close to 1000 MPa and that the relative strengthening effect of each phase is sensitive to the Ti and Al concentration.
Maraging steels are high-strength steels that are hardened by the formation of precipitates during an isothermal aging heat treatment. Depending on the aging temperature and time the cooling rate after holding can play a significant factor on the development of the microstructure and mechanical properties. This study seeks to show how the cooling time influences the precipitation hardening effect, austenite reversion and the development of hardness and impact toughness. The material was aged at a constant temperature using holding times of 0 h, 4 h and 15 h and cooled with different cooling rates resulting in cooling times of 7 h, 28 h and 56 h. The microstructure was characterized using a combination of electron backscatter diffraction, X-ray diffraction and atom probe tomography with cluster-based precipitate analysis. It is shown that the effect of the cooling time is strongly dependent on the holding time and that a longer cooling time can improve hardness and impact toughness.