Kuang-Jau Fann

Prof. Kuang-Jau Fann


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 April 2017 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KFKuang-Jau Fann
Kuang-Jau Fann
CCChun-Chi Chen
Chun-Chi Chen
Peripheral coarse grain during and after hot forming is often a major inconvenience for manufacturing aluminum alloy parts. Not only is the strength reduced, but the subsequent surface treatments are also hard to realize. The literature has shown that peripheral coarse grain is very likely induced by the previous process, such as extrusion. To investigate if peripheral coarse grain could be caused solely by hot forming, this study removed the billet surface layers. This eliminates the effect from the previous processes preparing the billets and forms ring specimens for executing ring compression test. The ring compression test can reveal the friction circumstance of the specimen to the die surface and create versatile deformation in the specimens to simulate forging situations, thereby providing multifaceted conditions to develop diverse grain size in specimen, particularly on its surface. The experiments were designed and analyzed under the Taguchi method, with consideration for factors such as working temperature, speed and amount of compression, and lubricant. Under each experiment, no peripheral coarse grains were found in the specimen, which were peeled and compressed, and even the average grain size after compression test is larger than that of the received billet. No peripheral coarse grains were found in the subsequent T6 temper either, which could, however, refine the grains.

21 February 2025 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
KFKuang-Jau Fann
Kuang-Jau Fann
LCLin-Pen Chen
Lin-Pen Chen
CYChun-Yen Yang
Chun-Yen Yang
CLChen-Yi Lee
Chen-Yi Lee
CTChang-Yu Tsai
Chang-Yu Tsai
JWJyhwen Wang
Jyhwen Wang
Bending is the fastest and most efficient process commonly used in the industry for processing thin metal sheets into three-dimensional shapes by localized deformation using only a single geometrical die. However, suppliers provide metal sheets with variations in dimension and mechanical properties, which causes inconsistencies in the final angle after bending. This requires manual checking and correction of each angle, resulting in inefficiency. The problem can be resolved by considering the variations in the sheets and adjusting the bending stroke accordingly. This study used neural network technology to create a model that predicts the final stroke required based on load measurements during the bending process. The model was implemented and validated using a laboratory press. With a root-mean-square error of less than 0.27 deg, the model demonstrates its feasibility for practical industrial applications within the range of its training data.

20 August 2023
Verified
Book Chapter
Closed access
PDF file
KFKuang-Jau Fann
Kuang-Jau Fann
YWYi-Hsien Wu
Yi-Hsien Wu

1 September 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
KFKuang-Jau Fann
Kuang-Jau Fann
BPB H Peng
B H Peng
In this study, a servo motor controller having only the mutually exclusive switching function between velocity and force control is used to set up a servo mechanical die cushion to explore the technology of force control that can enable the cushion to obtain the pre-acceleration function. Under different torque settings of the servo motor, the final velocity and the travel stroke of the die cushion for a certain time duration have been investigated for each response surface. A design scheme to determine the setting parameters for the pre-acceleration of the die cushion, such as the torque and the time duration, in which its both response surfaces of the velocity and the stroke are used, is thus proposed and verified by examples. The results show that the design scheme is indeed feasible and would be available for corresponding technicians’ reference.

1 September 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
KFKuang-Jau Fann
Kuang-Jau Fann
This article aims to have a glimpse into the effect of the spinning tool parameters (focusing on its diameter, attack angle, nose radius, and feed) by applying the explicit code of the commercial finite element analysis software LS-DYNA. The preliminary results show that the greater the axial feed, the greater the loads generated in the axial, the tangential, and the radial directions. At the same time, the larger the axial feed, the more the elements are parallel to the axial direction from the inflection point to the tube opening. Furthermore, using a larger axial feed will also cause the flaring of the tube opening and make the flaring more obvious. In addition, using a larger axial feed will not only cause a greater material accumulation in front of the attack angle, but also a larger material accumulation at the tangential rear of the nose radius. Moreover, the greater the attack angle, the greater the axial load. There is no further significant effect of the corner radius of the spinning tool on the spinning load.

11 July 2021
Verified
Book Chapter
Closed access
PDF file
KFKuang-Jau Fann
Kuang-Jau Fann
MLMathias Liewald
Mathias Liewald
KRKim Rouven Riedmüller
Kim Rouven Riedmüller