Guangxi Key Laboratory of Optical and Electronic Materials and Devices, College of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, China
Dr. Song Guo
Guangxi Key Laboratory of Optical and Electronic Materials and Devices, College of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, China
The simultaneous identification of multiple metal ions in water has attracted enormous research interest in the past few decades. We herein describe a novel method for multiple metal ion detection using a carbon quantum dots (CQDs)-based chemosensor array and the CQDs are functionalized with different amino acids (glutamine, histidine, arginine, lysine and proline), which act as sensing elements in the sensor array. Eleven metal ions are successfully identified by the designed chemosensor array, with 100% classification accuracy. Importantly, the proposed method allowed the quantitative prediction of the concentration of individual metal ions in the mixture with the aid of a support vector machine (SVM). The sensor array also enables the qualitative detection of unknown metal ions under the interference of tap water and local river water. Thus, the strategy provides a novel high-throughput approach for the identification of various analytes in complex systems.
Organic luminescent materials with high luminescence efficiency in both solution and solid states, namely dual-state emission (DSE), have attracted considerable attention due to their promising applications in various fields. In order to enrich the variety of DSE materials, carbazole, similar to triphenylamine (TPA), was utilized to construct a novel DSE luminogen named 2-(4-(9H-carbazol-9-yl)phenyl)benzo[d]thiazole (CZ-BT). CZ-BT exhibited DSE characteristics with fluorescence quantum yields of 70, 38 and 75% in solution, amorphous and crystalline states, respectively. CZ-BT shows thermochromic and mechanochromic properties in solution and solids, respectively. Theoretical calculations show that there is a small conformational difference between the ground state and the lowest singly excited state of CZ-BT and that it exhibits a low non-radiative transition characteristic. The oscillator strength during the transition from the single excited state to the ground state reaches 1.0442. CZ-BT adopts a distorted molecular conformation with intramolecular hindrance effects. The excellent DSE properties of CZ-BT can be explained well using theoretical calculations and experimental results. In terms of application, the CZ-BT has a detection limit for the hazardous substance picric acid of 2.81 × 10−7 mol/L.
Nonconventional luminescent materials (NLMs) which do not contain traditional aromatic chromophores are of great interest due to their unique chemical structures, optical properties, and their potential applications in various areas, such as cellular imaging and chemical sensing. However, most reported NLMs show weak or no emission in dilute solutions, which severely limits their applications. In this work, dynamic hydrogen bonds were utilized to design NLMs with efficient emission in dilute solutions. To further validate the results, polymers P1 and P2 were successfully prepared and investigated. It was found that the luminescence quantum efficiency of P1 and P2 at a concentration of 0.1 mg/mL in water solution was 8.9 and 0.6%, respectively. The high efficiency can be attributed to the fact that polymer P1 has more intra- or intermolecular dynamic hydrogen bonds and other short interactions than P2 in dilute solutions, allowing P1 to achieve the through-space conjugation effect to increase the degree of system conjugation, restrict molecular motion, and decrease nonradiative transitions, which can effectively improve luminescence. In addition, polymer P2 exhibits the characteristics of clustering-triggered emission, excitation wavelength-dependent and concentration-dependent fluorescence properties, excellent photobleaching resistance, low cytotoxicity, and selective recognition of Fe3+. The present study investigates the manipulation of luminescence properties of NLMs in dilute solutions through the modulation of dynamic hydrogen bonds. This approach can serve as a semi-empirical technique for designing and building innovative NLMs in the times ahead.
Two novel neutral phosphorescent iridium(III) complexes (Ir1 and Ir2) were rationally designed and synthesized with high yields using 10,11,12,13-tetrahydrodibenzo[a,c]phenazine as the main ligand. The two complexes showed bright-red phosphorescence (625 nm for Ir1, and 620 nm for Ir2, in CH2Cl2), high-luminescence quantum efficiency (0.32 for Ir1, and 0.35 for Ir2), obvious solvatochromism and good thermostability. Then, they were used to fabricate high-efficiency red OLEDs via vacuum evaporation; the maximum current efficiency, power efficiency, and external quantum efficiency of the red devices based on Ir1 and Ir2 are 13.47/15.22 cd/A, 10.35/12.26 lm/W, and 10.08/7.48%, respectively.
Two novel neutral phosphorescent iridium(III) complexes (Ir1 and Ir2) were rationally designed and synthesized with high yields using 10,11,12,13-tetrahydrodibenzo[a,c]phenazine as the main ligand. The two complexes showed bright red phosphorescence (625 nm for Ir1, and 620 nm for Ir2, in CH2Cl2), high luminescence quantum efficiency (0.32 for Ir1, and 0.35 for Ir2), obvious solvatochromism and good thermostability. Then, they were used to fabricate high-efficiency red OLEDs via vacuum evaporation, the maximum CE, PE, and EQE of the red devices based on Ir1 and Ir2 are 13.47/15.22 cd/A, 10.35/12.26 lm/W, and 10.08/7.48%, respectively.
Two novel ionic red/near-infrared Ir(III) complexes (Ir1 and Ir2) were reasonably designed and prepared using 2-(1-isoquinolinyl)-9,10-anthraquinone as the main ligand and 4,4′-dimethyl-2,2′-bipyridyl and 4,4′-dimethoxy-2,2′-bipyridyl as the auxiliary ligands, respectively. Both complexes showed bright phosphorescence in solution (peak at 618 nm with a shoulder at 670 nm). Interestingly, the phosphorescence peak of two Ir(III) complexes showed a blue-shift of about 36 nm after being ground. Simultaneously, both complexes exhibited mechanical force-induced enhanced emission, and the intensity of the luminescence for Ir1 and Ir2 increased by around two times compared to the one before being ground, respectively. Powder X-ray diffraction (PXRD) and time-dependent density functional theory (TD-DFT) calculation were utilized to understand well the mechanism of this phenomenon and suggested that the destruction of the well-ordered crystalline nature and the decline in triplet-triplet annihilation maybe responsible for the pressure-induced blue-shift and the enhancement of the phosphorescence.