mostafa wageh

Dr. mostafa wageh

Faculty of Technology and Education,Department of Process Control Technology, Beni-Suef University, Banī Suwayf, Egypt
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 May 2023 in IEEE Access
Verified
Journal Article
Open access
mostafa wagehmostafa wageh
mostafa wageh
Sherif DabourSherif Dabour
Sherif Dabour
RMRamadan Mahmoud Mostafa
Ramadan Mahmoud Mostafa
DADhafer J. Almakhles
Dhafer J. Almakhles
Mahmoud F. ElmorshedyMahmoud F. Elmorshedy
Mahmoud F. Elmorshedy
In this study, a new single-stage inverter with improved boosting performance was proposed to enhance the recently developed split-source inverter (SSI) topology. The study introduced new SSI configurations with high voltage gain. The proposed design features a voltage-lift cell made of capacitors, inductors, and diodes, which increases the boosting capability. The decoupled control technique, where The DC input current is controlled by the AC modulation signals,allows for independent adjustment of both the DC input and AC output current. The research also employed a modified space vector modulation approach to manage the inverter switches and reduce current ripple. The combination of the proposed topology and the modified SVPWM scheme significantly improves the DC-boosting capabilities. the validity of the proposed solution was confirmed through simulation using three-phase SSI models in MATLAB/SIMULINK®. Finally, The validity of the simulation and experimental investigation of the analysis and performance of the topologies provided.

6 March 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
mostafa wagehmostafa wageh
mostafa wageh
HRHaitham S. Ramadan
Haitham S. Ramadan
SDSherif M. Dabour
Sherif M. Dabour
This paper presents an enhanced Maximum Power Point Tracking (MPPT) algorithm for Quadratic-Boost Split Source Inverters (QB-SSI), designed for grid-connected Photovoltaic (PV)-powered smart charging stations for Electric Vehicles (EVs). The proposed algorithm integrates advanced control strategies and adaptive techniques to address the limitations of traditional MPPT techniques. By dynamically adjusting to operating conditions and environmental factors, the enhanced algorithm achieves accurate and rapid tracking of the maximum power point (MPP) under dynamic conditions. The paper provides a comprehensive overview of the QB-SSI topology, a detailed mathematical model, and simulation results. These findings demonstrate the superior performance of the enhanced MPPT algorithm, offering significant improvements in tracking accuracy, convergence time, and efficiency, thereby enhancing the overall performance of QB-SSI-based PV systems. A modified space vector modulation (SVPWM) is utilized to enhance the inverter switching characteristics and dc-boosting capability. The overall system is modeled via MATLAB/Simulink™, and the experimental results providing valuable insights into the performance and functionality of the proposed algorithm. This allows for a comprehensive analysis of its capabilities and potential advantages in practical applications.

1 December 2017
Verified
Conference Paper
Closed access
ESE. G. Shehata
E. G. Shehata
JTJean Thomas
Jean Thomas
ABA. M. Brisha
A. M. Brisha
mostafa wagehmostafa wageh
mostafa wageh
In this paper, performance of a high gain quasi Y-source impedance network converter is analyzed. This converter has a high voltage gain while using a small duty ratio. Compared to other impedance source converters, Y-source converter operates with lower shoot-through duty cycle for the same boosting gain. To achieve that, a three windings transformer with very low leakage inductance is employed. In turn, the switching losses and heating are low at the same boosting gain. Moreover, in this type of converter, the boosting gain depends on number of variables, and hence more degrees of freedom for meeting design constraints. The voltage and current of the switching elements are analyzed during shoot and non-shoot through. The analysis shows that, for high boosting gain, some components has high voltage stress compared to conventional converters. Moreover, fast switching diodes are required to achieve high boosting gain. The performance of the proposed converter is analyzed using numerical simulation and experimental testing.

2 October 2021 in Australian Journal of Electrical and Electronics Engineering
Verified
Journal Article
Closed access
mostafa wagehmostafa wageh
mostafa wageh
Sherif DabourSherif Dabour
Sherif Dabour
RMR. M. Mostafa
R. M. Mostafa
MGM. A. Ghalib
M. A. Ghalib
This study introduces a photoelectric (PV) system based on the maximum power point tracking (MPPT) technique, which is performed by the perturb and observe P&O method. This algorithm is chosen due to its ability to withstand any difference in parameters and high efficiency. The interleaved boost converter characteristics are controlled using maximum power point tracking (MPPT), and Space vector modulation (SVPWM) is the control technique used to control the three-phase voltage source converter. In order to measure the overall performance of the system, simulations are performed in the MATLAB/Simulink environment.

14 December 2021
Verified
Conference Paper
Closed access
mostafa wagehmostafa wageh
mostafa wageh
SDSherif M. Dabour
Sherif M. Dabour
RMRamadan Mahmoud Mostafa
Ramadan Mahmoud Mostafa
In this paper, a one-stage dc-ac inverter with high boosting capability has been proposed. The proposed inverter topology develops the basic split-source inverter with a voltage-lift cell constructed from three capacitors, two inductors, and four diodes to increase the boosting capability. A relatively high voltage dc-dc boosting factor is achieved with a reduced input dc-current ripple with this combination. Consequently, this inverter topology can achieve a high voltage gain at the ac output terminals. The proposed inverter topology and its mode of operations are described in detail in this paper. In addition, the mathematical relations based on the steady-state analysis that illustrate the working principle and the main characteristics of this inverter have been introduced. Moreover, a modified space vector modulation (SVPWM) scheme is used in this paper to control the inverter switches and to reduce the input current ripples. It can be found that the proposed topology with the given SVPWM schemes increases the dc-boosting capability. The main drawback of this topology is the utilization of more passive elements in the dc-side. Three-phase SSI simulation models have been constructed and simulated using MATLAB/SIMULINK®. Finally, the simulation results are presented to validate the feasibility of this study.

22 April 2024 in Discover Applied Sciences
Verified
Journal Article
Open access
PDF file
SHSamir A. Hamad
Samir A. Hamad
WXWei Xu
Wei Xu
mostafa wagehmostafa wageh
mostafa wageh
AJAbdul Khalique Junejo
Abdul Khalique Junejo
MGMohamed A. Ghalib
Mohamed A. Ghalib
The Split Source Inverter (SSI) is a single-stage DC-AC converter topology widely recognized for its beneficial features compared to the Z-source inverter. These advantages include a reduced number of components, a constant input current, and minimized losses. This study aims to extensively investigate and analyze the operation of a 3 kW Linear Induction Motor (LIM) using SSI through comprehensive simulations. The suggested control approach, employing finite control-model predictive thrust control (FC-MPTC), exhibits remarkable dynamic behavior and achieves a fast transient response without necessitating modifications to the control loop. Moreover, the proposed method allows for the manipulation of multiple variables by utilizing a single cost function, eliminating the need for lookup tables. The efficacy of the proposed control method is validated through comprehensive simulations and experimental tests, which exhibit accurate reference tracking speed and superior dynamic performance in regulating the thrust and primary flux. The results also showed that the proposed method had lower undulations of 5.8% than the traditional method. The proposed approach outperforms the DTC-SVM method under varying load and speed conditions by delivering remarkable accuracy and improved control characteristics.