Guoxian Wang

Dr. Guoxian Wang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 March 2020 in Materials Research Express
Verified
Journal Article
Open access
PDF file
XXXinhong Xiong
Xinhong Xiong
LZLong Zhu
Long Zhu
GWGuoxian Wang
Guoxian Wang
DLDanhui Liu
Danhui Liu
QZQiaoxin Zhang
Qiaoxin Zhang
WFWei Feng
Wei Feng
An n-type Bi2Te3-based thermoelectric material Bi2Te2.85Se0.15 was prepared through an SLS (Selective Laser Sintering) process with E12/Bi2Te2.85Se0.15 as composite powder (weight ratio 1:7), from which E12 was degreased after the SLS process. It was studied the effect of laser power, scanning speed and scanning interval on the density and thermoelectric properties of the sintered samples. The laser power was found the most important influential factor, while the scanning interval was the second and the scanning speed the least. The maximum dimensionless thermoelectric figure of merit ZT is about 0.88 in the condition when the laser power, scanning interval and scanning speed were 20W, 0.26mm and 3000mm/s, respectively.

14 December 2022 in Sensors
Verified
Journal Article
Open access
PDF file
CZChengli Zhao
Chengli Zhao
HXHao Xiao
Hao Xiao
ZZZhangyan Zhao
Zhangyan Zhao
GWGuoxian Wang
Guoxian Wang
The basic theory of photogrammetry is mature and widely used in engineering. The environment in engineering is very complex, resulting in the corners or multi-line intersections being blocked and unable to be measured directly. In order to solve this problem, a prediction and optimization algorithm for intersection point of spatial multi-lines based on photogrammetry is proposed. The coordinates of points on space lines are calculated by photogrammetry algorithm. Due to the influence of image point distortion and point selection error, many lines do not strictly intersect at one point. The equations of many space lines are used to fit their initial value of intersection point. The initial intersection point is projected onto each image, and the distances between the projection point and each line on the image plane are used to weight the calculated spatial lines in combination with the information entropy. Then the intersection point coordinates are re-fitted, and the intersection point is repeatedly projected and recalculate until the error is less than the threshold value or reached the set number of iterations. Three different scenarios are selected for experiments. The experimental results show that the proposed algorithm significantly improves the prediction accuracy of the intersection point.

1 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZZZe Zhu
Ze Zhu
YLYangyi Luo
Yangyi Luo
HXHanbin Xiao
Hanbin Xiao
ZLZhanfeng Li
Zhanfeng Li
CXChang Xu
Chang Xu
GWGuoxian Wang
Guoxian Wang
For development of a simulator with a motion platform to generate an appropriate motion to reproduce the motion sense for the users, one of the most significant but disregarded complicated tasks is to build up a dynamic virtual motion model to reflect the motion of the simulated object in the corresponding physical world. Recently, a motion generation method based on motion blending technology was developed to alleviate the complication involved. It decomposes the simulated motion into a great number of parameterized motion blocks which are depicted by real motion data acquired from field tests and stored in a database. This paper proposes a streamlined motion blending technology suitable for a container crane simulator to further improve the current motion generation method based on the motion blending technology. Motion components, rather than motion blocks specially marked and stored in a database, are taken as the basic motion unit easily acquired through united analysis of crane dynamics and motion perception characteristics. They are then blended on demand to produce a one-stop model to directly act as the driving command of the motion platform without the need for a subsequent dedicated wash-out procedure. The calculation workload is greatly reduced and finally allows for achievement of higher fidelity of motion perceptions. Experiments are conducted to verify the effectiveness of the proposed streamlined motion blending technology for motion perception generation. Better training effect is found to be achieved due to more realistic simulation effects. The comprehensive training effectiveness index is enhanced from 54% to 82% once a motion simulation system developed using the proposed approach is introduced into the crane simulator.

7 September 2023 in Wireless Networks
Verified
Journal Article
Open access
PDF file
QZQuanlin Zhou
Quanlin Zhou
XXXinhong Xiong
Xinhong Xiong
LZLong Zhu
Long Zhu
GWGuoxian Wang
Guoxian Wang
The vehicle-mounted missile vertical thermal emission not only has excellent maneuverability, randomness, and concealment, but also has a short response time, good versatility, and high reliability, so it is widely used. In order to explore the gas flow field of thermal emission of the vehicle-mounted missile, firstly, this study introduces the theoretical basis of deep reinforcement learning (DRL) algorithm and wireless sensor network (WSN). Secondly, combining WSN and DRL, a WSN technology based on DRL is proposed. Finally, the DRL-based WSN technology is applied to the vertical thermal emission of the vehicle-mounted missile. In addition, the flow field simulation software is employed to simulate and compare the influence of the single-side and double-side diversion schemes of the gas flow discharged by the diverter on the open ground field flat collection launcher, and the diversion characteristics of the two schemes are obtained. The results show that in the single-side diversion scheme, the impact and ablation area of the gas jet on the ground mainly appear at the rear side of the diversion device, and the ablation area of the gas jet on the launcher vehicle is mainly at its tail end. While the ablative site and shock of the double-side diversion scheme on the ground mainly appear on both sides of the diversion, and the ablative part of the gas jet to the launcher is mainly present at the bottom of the frame and the inside surface of the tire. The study of missile thermal emission flow fields based on DRL and WSN has certain theoretical significance for the flow field variation of missile launching.