The rainbow trapping effect, which enables field amplification of multiple wavelengths in topological insulators, offers unprecedented opportunities for integrated ultrasonic sensors and energy harvesting. However, until now, the realization of the rainbow trapping effect has been limited to a one-dimensional (1D) or 2D interface in the electromagnetic and acoustic systems. Here, we propose a method to realize rainbow trapping based on higher-order topological corner modes (HOTCMs), where the elastic wave is localized at 0D corners rather than at the interface. We strategically design the two-dimensional elastic locally resonant metamaterial plate and construct multiple HOTCMs at the interfacial corners formed by trivial and nontrivial domains. We further investigate the interplay between nearest-neighbor couplings and next-nearest-neighbor couplings. Remarkably, the HOTCMs localized at corners with different geometric configurations are shown to be frequency dependent, providing a platform for trapping elastic waves at different corners. Moreover, we demonstrate rainbow trapping based on the HOTCMs at the corners and show the agreement between the experimental results and theoretical modeling. Our results provide a mechanism to realize the trapping of multiple frequencies and extend the use of elastic integrated devices toward higher order topological insulators.
The strut-and-tie model (STM) has been adopted as a preferred methodology for the design of disturbed regions; however, an aspect that has not yet been sufficiently cleared up is the service behavior of structural concrete designed at the ultimate limit state. To address this issue, this paper is devoted to developing an advanced elastic-to-plastic strut-and-tie model (EPSTM) to capture the full elastic and inelastic response of the anchorage zones. The principle of stationary complementary energy is introduced into the STM to generate the adaptive EPSTM at each load step automatically. The proposed EPSTM provides a consistent analysis of the behavior of anchorage zones, including the average strain of struts and ties, load-deformation response, and the maximum crack width, throughout the loading process, and it has been verified to be sufficiently accurate when compared with testing results.