A soft ring-shaped pneumatic actuator (RPA) that contracts radially plays a key role in biomimicking the contractions of the digestive system. However, the modeling and control of the RPA are still challenging due to the nonlinearity, hysteresis, and unique structure. In this article, we present an active-model-enhanced control (AMEC) scheme for the precise contraction control of the RPA. First, a generalized mass–spring–damper model is proposed to describe the dynamics of the RPA focusing on the midpoint of the inner wall. Based on the proposed model, the AMEC scheme is developed to enhance a proportional–integral–derivative (PID) controller in terms of tracking a reference trajectory. In this scheme, the modeling errors of the generalized mass–spring–damper model are estimated by an active modeling algorithm, which is integrated into the PID controller to eliminate the effect of the modeling errors. Finally, experiments are conducted to validate the proposed modeling and control scheme. The results indicate that the modeling errors are estimated by the active modeling algorithm with an acceptable estimation error. The tracking error of the AMEC is 52.7% smaller than that of the PID controller. The proposed modeling and control methods for the RPA lay a solid foundation for its biomimetic application.
Origami robots have garnered attention due to their versatile deformation and potential applications, particularly for medical applications. In this article, we propose a Yoshimura continuum manipulator (YoMo) that can achieve accurate control of the tip position for the magnetic resonance (MR) environment. The YoMo made of a single piece of paper is cable-actuated to generate the bending and shortening deformation. The paper-based YoMo attached to an arc frame can readily function under different orientations in the MR environment. The design and fabrication of YoMo were formulated according to the Yoshimura folding pattern. The kinematics model based on constant curvature assumption was derived as a benchmark method to predict the tip position of the YoMo. The Koopman operator theory was applied to describe the relationship between the tip position and the length change under different orientations. The linear quadratic regulator integrated into the Koopman-based model (K-LQR) was adopted to achieve the trajectory tracking. Comprehensive experiments were carried out to examine the proposed YoMo, its modeling and control methods. The performance of the YoMo including stiffness and workspace was characterized via a customized test setup. The Koopman-based method demonstrates the superiority over the constant curvature-based model to predict the tip position. The K-LQR control method was examined with different trajectories, and the impact of the orientation, speed, and different trajectories were taken into consideration. The results demonstrate the YoMo is capable of achieving trajectory tracking with satisfied accuracy, indicating its potential for medical applications in the MR environment.
Needle manipulation with the guidance of magnetic resonance imaging (MRI) plays a key role in minimally invasive procedures such as biopsy and ablation. However, the confined bore and strong magnetic field of the MR environment pose great challenges in developing a robotic system that fulfills the needle manipulation function. This paper presents the design and analysis of a soft needle manipulator (SoNIM) that can achieve needle manipulation in the MR environment. This pneumatically actuated manipulator consists of two bending actuators and one elongation actuator that are completely made of non-magnetic materials. These soft pneumatic actuators can generate flexible movements while maintaining a compact design, ensuring that the SoNIM is accommodated within the MRI bore. The kinematic modeling and closed-loop control of the SoNIM are investigated to achieve the position control of the needle tip. Experiments showed that the SoNIM was capable of directing the needle tip to reach the targets with a satisfactory accuracy of 2.9 ± 0.98 mm. Furthermore, the functionality and MRI compatibility of the SoNIM were validated in the clinical setting, demonstrating the capability of the SoNIM to perform needle manipulation in the MRI bore with negligible degradation to the image quality. With excellent MRI compatibility, compact design, and flexible movements, the SoNIM provides a promising solution for manipulating surgical needles in MRI-guided minimally invasive surgeries.
2 October 2026 in Sensors and Actuators A: Physical