Friction and wear usually lead to huge energy loss and failure of machine pairs, which usually causes great economic losses. Researchers have made great efforts to reduce energy dissipation and enhance durability through advanced lubrication technologies. Single-layer coatings have been applied in many sectors of engineering, but the performance of single-layer coatings still has many limitations. One solution to overcome these limitations is to use a multilayer coating that combines different components with varied physical and chemical properties. In addition, multilayer coating with alternating layers only containing two components can lead to improved performance compared to a coating with only two different layers. This paper systematically reviews the design concept and properties of different types of multilayer coatings, including transition-metal nitride coatings, diamond-like carbon-based coatings, and other multilayer coatings. The inherent functional mechanisms of the multilayer structures are also detailed and discussed.

Graphene-family materials have been investigated by researchers as promising additives for various lubrication systems due to their unique physical-chemical properties. It has been proven that graphene-family materials can lead to enhanced lubrication and wear-resistance performance, which have potential to reduce the energy losses and carbon emissions, and the wear of machines for industrial applications. Experimental, theoretical, and simulation studies have been performed to investigate the tribological behaviors of graphene-family materials as additives. The tribological properties of graphene-family materials, including graphene, reduced graphene oxide, functionalized graphene, and the combination of graphene-family materials and other materials as additives, and the fundamental mechanism are systematically reviewed and concluded. The authors also discuss the potential engineering applications of graphene-family materials as lubricating additives, and the unsolved issues and optimistic outlooks in the near future.

An oil-impregnated porous polyimide (PI) retainer is used in space rolling bearings to improve the lubrication performance, which depends on the release of lubricant from the pores, and therefore is closely related to the pore size. To study the effect of pore size, in this work, PI materials with different pore sizes were prepared by preheating the retainer tube billet during the limit pressing process, and then the friction tests were conducted with the ball-on-ring mode. The results show that the applied load deforms the pores, allowing the lubricant to be squeezed out from the pore; the centrifugal effect induced by rotation also makes the lubricant migrate out of the pore. Therefore, for the same pore sizes, the friction coefficients decrease with the increasing loads and rotation speeds. In addition, it was found that there exists an optimal pore size for the best lubrication properties of porous PI material. Furthermore, the optimal pore size should be larger for lubricants with high viscosity. The microscopic mechanism for lubricant outflow from pores is clarified by molecular dynamic simulations. The insights gained in this study can guide the preparation of oil-impregnated porous retainers under different working conditions.