The release and transport of heavy metals (Ni, Cr, Cu and Pb) from Liangshui River sediments into the overlying water column during the resuspension event were determined using an annular flume with a velocity ranging from 0.15 to 0.35 m/s. It is shown that the suspended particulate matters (SPM) increased as much as nearly 25 times from 165 to 4220 mg/L as the velocity increased. Heavy metals showed an increase in dissolved phase as the velocity increased due to their desorption from the SPM. Acid-soluble heavy metals increased as the velocity increased, indicating that part of the heavy metals transformed from stable phase to labile phase during resuspension. Heavy metal concentrations in the SPM on volume normalization increased by approximately 2–6 times. However, on the mass weighted basis they decreased, approaching the bulk-sediment contents at high velocity, due to the “particle concentration effect”. The distribution coefficients (KD) of heavy metals were higher at slower velocity during the sediment resuspension, which could be attributed to the decrease of fine particles (silt/clay fraction) during resuspension.
Anaerobic co-digestion (AcoD) has been a widely accepted method to treat food waste (FW) and sewage sludge (SS). However, there is a knowledge gap regarding the key speciation transformation of nitrogen and sulfur in AcoD. Here, we explored the changes of nitrogen (N) and sulfur (S) compounds in liquid digestion and biogas, as well as the composition of microbial community structure and related metabolic functions. The results showed that H2S in the biogas was the main form of S in the early stage, and then, it was converted into SO42− and SO32−, while NH3 and NH4+ were the main forms of N during the AcoD. In addition, bacterial diversity was associated with N and S compounds; Syntrophomonas and Aminobacterium were positively correlated to H2S, NH3, NH4+ and SO32−, and Saccharibacteria_genera_incertae_sedis, Candidatus_Cloacamonas and Thermomonas were positively correlated to SO42− and NO2−. Additionally, the FAPROTAX prediction showed that the functional composition related to N and S metabolism was different from SS and inoculum after the AcoD. This study provides detailed information of conversion of N and S of the AcoD, which could lay a foundation for the subsequent regulation of the mechanism of nitrogen and sulfur compounds in the methanogenic process.
Flocculation of kaolin suspension with aluminium fractal polycations was investigated as a function of aluminium concentration and pH. Aluminium flocculants included Al13 and Al13 aggregates with OH/Al ratio of 2.6 and 2.8, respectively. The flocculation kinetics and floc size distribution were monitored by light scattering. The characterization of flocculants showed that the tridecatmer Al13 and bridged [Al13]n with out-sphere structure were the dominant species for all flocculants in a wide pH range. The coagulation results indicated that the pre and in situ-formed [Al13]n play a key role in removing particles. With the increasing concentration of [Al13]n, coagulation mechanisms were transformed from charge-neutralization, electro-patch coagulation to bridge-aggregation. Moreover, sweep-flocculation was involved at higher dosage besides other three mechanisms when amorphous aluminium oxides formed. Hence, chemical interaction between particles and flocculants evolved from surface adsorption to surface precipitation for aluminium polycations by virtue of species transformation.
Metal nanoparticles are effective for remediation of contamination with a range of compounds including chlorinated organics. However, the sorption process of the passivation oxide layers on the metal nanoparticle surfaces may result in incomplete degradation of contaminants. This phenomenon can be prevented by an acidic washing procedure or reaction in an acidic medium. In this paper, nickel nanoparticles manufactured via the carbonyl powder process were analyzed using scanning electron microscopy, transmission electron microscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy. The sorption and degradation of 2,4-dichlorophenol (2,4-DCP) by nickel nanoparticles under acidic conditions was then investigated. Transmission electron microscopy and XRD results showed that the nickel nanoparticles range in size from 10 to 20 nm, and a thin passivation layer of NiO is present on the surface. This oxide layer can be removed by pretreatment washing with acidic solutions. It was indicated that dechlorination was the key reaction pathway for degradation of 2,4-DCP by nickel nanoparticles under acidic conditions. The main degradation products were 4-Chlorophenol, 2-Chlorophenol, and Phenol, and among these, Phenol was dominant. The acidic medium promoted degradation by providing an appropriate pH, and H+ may be involved in the reaction. Dechlorination of 2,4-DCP by nickel nanoparticles under the acidic condition follows the second order kinetic model, and the rate constants at 298, 306, 316 K are 0.02, 0.2 and 0.3 (g L h)−1, respectively.