Pablo Silva Boloña

Dr. Pablo Silva Boloña


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2020 in Journal of Dairy Science
Verified
Journal Article
Open access
PBPablo Silva Boloña
Pablo Silva Boloña
JUJohn Upton
John Upton
DRD.J. Reinemann
D.J. Reinemann
The aim of this study was to estimate the amount of milk left in quarters and udders and the milking duration for a variety of teat cup removal strategies. A combination of empirical data and simulated quarter and udder teat cup removal settings were used to make these estimates. Milking duration is an important factor in both automatic and conventional milking systems because it directly influences milking efficiency and hence can affect farm profitability. Strategies investigated in the literature to reduce milking duration include the application of different milk flow rate switch-points (milk flow rate at which the milking unit or teat cup is removed). Applying these milk flow rate switch-points can affect the amount of milk that is not harvested (strip milk). We are not aware of previous research analyzing strip milk yield and milking duration at the quarter level, across a range of quarter and udder milk flow rate switch-points. Quarter-level average milking duration decreased by 2 min, and strip milk increased 1.3 kg as quarter milk flow rate switch-point was increased from 0.2 kg/min to 1.0 kg/min. Using an end of milking criterion of removal of the teat cup at 50% of the quarter's rolling average milk flow rate resulted in a 0.4-min reduction in milking duration and a 0.08-kg increase in strip milk per quarter, compared with removal of the teat cup at 30% of the quarter's rolling average milk flow rate. Udder-level average milking duration decreased by 1.4 min, and strip milk increased by 0.76 kg (0.19 kg per quarter) as udder milk flow rate switch-point was increased from 0.2 kg/min to 1.0 kg/min. A 0.8-min reduction in cow milking duration and a 0.27-kg increase in strip milk at the udder level (0.08 kg per quarter) resulted when changing udder milk flow rate switch-point from 30% of the udder rolling average to 50% of the udder rolling average milk flow rate. This study provides quantitative estimates of the effect of teat cup milk flow rate switch-points on milking duration and strip milk yield.

1 April 2023 in Journal of Dairy Science
Verified
Journal Article
Open access
JUJohn Upton
John Upton
MBM. Browne
M. Browne
PBPablo Silva Boloña
Pablo Silva Boloña
Automatic cluster removers (ACR) operate by ceasing vacuum to the cluster and detaching the milking unit from the udder by means of a retracting cord once the milk flow has decreased to a predefined level (i.e., the milk flow rate switch-point). There is a large body of literature on this topic indicating that increasing the flow rate switch-point (e.g., from 0.2 kg/min to 0.8 kg/min at the udder level) is effective in reducing milking duration while having little effect on milk yield or milk somatic cell count (SCC). However, despite these findings many farms still use a switch-point of 0.2 kg/min because it is believed that emptying the udder completely at each milking is a prerequisite for good dairy cow management, especially in relation to maintaining a low milk SCC. However, there may be additional undocumented benefits in terms of cow comfort to increasing the milk flow rate switch-point, because the low milk flow period at the end of milking is a high-risk time for inducing teat-barrel congestion. The objective of this study was to quantify the effect of 4 milk flow rate switch-point settings on cow comfort, milking duration, and milk yield. In this study, we applied 4 treatments consisting of different milk flow rate switch-points to cows in a crossover design in a spring calving grass based dairy herd in Ireland. The treatments were (1) MFR0.2, where the cluster was removed at a milk flow rate of 0.2 kg/min; (2) MFR0.4, where the cluster was removed at 0.4 kg/min; (3) MFR0.6, where the cluster was removed at 0.6 kg/min, and (4) MFR0.8, where the cluster was removed at 0.8 kg/min. Milking parameters were recorded by the parlor software and leg movements (i.e., kicks or steps) during milking were recorded with an accelerometer. These data were used as a proxy for cow comfort during milking. The results of this study showed significant differences in cow comfort across treatments, as indicated by cow stepping during milking, for a.m. milkings, but these differences were not detected for p.m. milkings, possibly because a.m. milkings were longer than p.m. milkings due to a 16:8 h milking interval on the research farm. Differences tended to distinguish the 2 lower-flow switch-point settings with greater leg movement against the 2 higher-flow switch-point settings with less leg movement during milking. The effect of treatment (milk flow rate switch-point) on daily milking duration was significant. The milk duration for MFR0.8 was 89 s (14%) shorter than MFR0.2. There was no significant effect of treatment on SCC in this study.

1 July 2023 in JDS Communications
Verified
Journal Article
Open access
AVAinhoa Valldecabres
Ainhoa Valldecabres
CCClare Clabby
Clare Clabby
PDPat Dillon
Pat Dillon
PBPablo Silva Boloña
Pablo Silva Boloña
Summary: The aims of this study were to describe quarter-level prevalence of intramammary infection (IMI) and somatic cell count (SCC), to evaluate the performance of commonly used SCC thresholds for the diagnosis of quarterlevel IMI and determine alternative thresholds for diagnosis of quarter-level IMI as defined by a positive aerobic culture in late lactation. A total of 8,177 quarter-level milk samples were available for analysis from both primiparous and multiparous cows from 21 Irish herds. The overall prevalence of quarter-level IMI was 6%; higher for primiparous (10.2%) than multiparous (5.2%). The most common etiological IMI agent was Staphylococcus aureus. Sensitivity and specificity were maximized at SCC thresholds lower than the traditional 200,000 cells/mL (61,000 cells/mL for primiparous; 101,000 cells/mL for multiparous). The identified quarterlevel SCC thresholds should be evaluated as guidance for selective dry cow therapy in the Irish dairy production scenario.

1 May 2022 in Journal of Dairy Science
Verified
Journal Article
Open access
PBPablo Silva Boloña
Pablo Silva Boloña
JUJohn Upton
John Upton
Victor E. CabreraVictor E. Cabrera
Victor E. Cabrera
TET. Erker
T. Erker
DRD.J. Reinemann
D.J. Reinemann
The aims of this research were (1) to develop a model to simulate a herd of cows and quarter milk flowrates for a milking and derive quarter and udder milking durations and box duration (i.e., the time a cow spends inside the robot) for a group of cows milked with an automatic milking system (AMS); (2) to validate the simulation by comparing the model outcomes with empirical data from a commercial AMS dairy farm; and (3) to apply teatcup removal settings to the simulation to predict their effect on quarter and cow milking duration and box duration in an AMS. For model development, a data set from an AMS farm with 32 robots milking over 1,500 cows was used to fit the parameters to the variables days in milk, parity, and milking interval, which were subsequently used to create a herd of cows. A second data set from 2019 from an AMS farm with 1 robot milking 60 cows that contained quarter milk flowrates (at 2-s intervals) was used to extract the parameters necessary to simulate quarter milk flowrates for a milking. We simulated a herd of cows, and each was assigned a parity, days in milk, milking interval, and milk production rate. We also simulated milk flowrates every 1 s for each quarter of each cow. We estimated quarter milking duration as the total time that flowrate was greater than 0.1 kg/min after a minimum of 1 min of milk flow. We incorporated a randomly sampled attachment time for each quarter and calculated cow milking duration as the time from the first quarter attached to the last quarter detached. We included a randomly sampled preparation time which, added to cow milking duration, represented box duration. For simulation application, we tested the effect of quarter teatcup removal settings on quarter and cow milking duration. The settings were based on absolute flowrate (0.2, 0.4, and 0.6 kg/min) or a percentage of the quarter's 30-s rolling average milk flowrate (20, 30, and 50%). We simulated over 84,000 quarter milkings and found that quarter milking duration (average 212 s) had a mean absolute percent error (MAPE) of 7.5% when compared with actual data. Simulated cow milking duration (average 415 s) had a MAPE of 8%, and box duration (average 510 s) had a MAPE of 12%. From simulation application, we determined that quarter milking duration and box duration were reduced by 19% (209 vs. 170 s) and 6.5% (512 vs. 479 s), respectively, when increasing the teatcup removal flowrate from 0.2 to 0.6 kg/min. Quarter milking duration and box duration were 7% (259 vs. 241 s) and 3% (590 vs. 573 s) longer respectively by using a teatcup removal setting of 20% of the quarter's rolling average milk flowrate, compared with 30%. Both results agree with previous research. This simulation model is useful for predicting quarter and cow milking and box duration in a group of cows and to analyze the effect of milking management practices on milking efficiency.

1 July 2023 in Journal of Dairy Science
Verified
Journal Article
Open access
CCC. Clabby
C. Clabby
AVA. Valldecabres
A. Valldecabres
PDP. Dillon
P. Dillon
SMS. McParland
S. McParland
SAS. Arkins
S. Arkins
PBPablo Silva Boloña
Pablo Silva Boloña
Use of selective dry cow antimicrobial therapy requires to precisely differentiate cows with an intramammary infection (IMI) from uninfected cows close to drying-off to enable treatment allocation. Milk somatic cell count (SCC) is an indicator of an inflammatory response in the mammary gland and is usually associated with IMI. However, SCC can also be influenced by cow-level variables such as milk yield, lactation number and stage of lactation. In recent years, predictive algorithms have been developed to differentiate cows with IMI from cows without IMI based on SCC data. The objective of this observational study was to explore the association between SCC and subclinical IMI, taking cognizance of cow-level predictors on Irish seasonal spring calving, pasture-based systems. Additionally, the optimal test-day SCC cut-point (maximized sensitivity and specificity) for IMI diagnosis was determined. A total of 2,074 cows, across 21 spring calving dairy herds with an average monthly milk weighted bulk tank SCC of ≤200,000 cells/mL were enrolled in the study. Quarter-level milk sampling was carried out on all cows in late lactation (interquartile range = 240-261 d in milk) for bacteriological culturing. Bacteriological results were used to define cows with IMI, when ≥1 quarter sample resulted in bacterial growth. Cow-level test-day SCC records were provided by the herd owners. The ability of the average, maximum and last test-day SCC to predict infection were compared using receiver operator curves. Predictive logistic regression models tested included parity (primiparous or multiparous), yield at last test-day and a standardized count of high SCC test-days. In total, 18.7% of cows were classified as having an IMI, with first parity cows having a higher proportion of IMI (29.3%) compared with multiparous cows (16.1%). Staphylococcus aureus accounted for the majority of these infections. The last test-day SCC was the best predictor of infection with the highest area under the curve. The inclusions of parity, yield at last test-day, and a standardized count of high SCC test-days as predictors did not significantly improve the ability of last test-day SCC to predict IMI. The cut-point for last test-day SCC which maximized sensitivity and specificity was 64,975 cells/mL. This study indicates that in Irish seasonal pasture-based dairy herds, with low bulk tank SCC control programs, the last test-day SCC (interquartile range days in milk = 221-240) is the best predictor of IMI in late lactation.

1 September 2019 in Journal of Dairy Science
Verified
Journal Article
Closed access
PBPablo Silva Boloña
Pablo Silva Boloña
DRD.J. Reinemann
D.J. Reinemann
JUJ. Upton
J. Upton
In automatic milking systems (AMS), it is important to maximize the amount of milk harvested per day to increase profitability. One strategy to achieve this goal is to reduce the time it takes to milk each cow. Several studies in conventional milking systems have shown that milking time can be reduced by increasing the milk flow rate at which the teatcup is removed. One study analyzed the effect of increasing the milk flow switch point on milking time in a confinement AMS. No research has been conducted on teatcup removal settings in pasture-based automatic milking systems. Furthermore, not all AMS remove the teatcups based on absolute milk flow rate (kg/min); hence, it is important to study alternative strategies. The aim of this experiment was to measure the effect of 3 novel teatcup removal strategies on box time (time in the AMS), milking time, somatic cell count (SCC), and milk production rate of cows milked in a pasture-based automatic milking system. Each teatcup removal strategy in this study was applied for a period of 1 wk to 1 of 3 groups of cows and then switched to the following group until cows had transitioned through all treatments. The teatcup removal strategies consisted of removing the teatcup when the quarter flow rate fell below 20% of the quarter rolling average milk flow rate (TRS20), when quarter milk flow rate was below 30% of the rolling average milk flow rate (TRS30), and when quarter milk flow rate dropped below 50% of the rolling average milk flow rate (TRS50). A limit prevented teatcup removal if the calculated milk flow rate for teatcup removal was above 0.5 kg/min. This limit was in place for all treatments; however, it only affected the TRS50 treatment. The TRS30 strategy had 9-s shorter milking time and 11-s shorter box time than the TRS20 removal strategy. The TRS50 strategy had 8-s shorter milking time and 9-s shorter box time than the TRS20 teatcup removal strategy. There was no significant difference in milking time or box time between the TRS30 and TRS50 teatcup removal strategies, probably due to the large variability in milk flow rate at teatcup removal. The TRS20 and TRS30 strategies did not differ in SCC or milk production rate. The 0.5 kg/min limit, which affected roughly 25% of milkings in the TRS50 treatment, may have distorted the effect that this setting had on milk time, box time, milk production rate, or SCC. The difference in box time for the TRS30 and TRS50 strategies could allow for more than 3 extra milkings per day.