Dielectric ceramic capacitors, with the advantages of high power density, fast charge-discharge capability, excellent fatigue endurance, and good high temperature stability, have been acknowledged to be promising candidates for solid-state pulse power systems. This review investigates the energy storage performances of linear dielectric, relaxor ferroelectric, and antiferroelectric from the viewpoint of chemical modification, macro/microstructural design, and electrical property optimization. Research progress of ceramic bulks and films for Pb-based and/or Pb-free systems is summarized. Finally, we propose the perspectives on the development of energy storage ceramics for pulse power capacitors in the future.
Lead-free bulk ceramics for advanced pulsed power capacitors show relatively low recoverable energy storage density (Wrec) especially at low electric field condition. To address this challenge, we propose an A-site defect engineering to optimize the electric polarization behavior by disrupting the orderly arrangement of A-site ions, in which $${\rm{B}}{{\rm{a}}_{0.105}}{\rm{N}}{{\rm{a}}_{0.325}}{\rm{S}}{{\rm{r}}_{0.245 - 1.5x}}{_{0.5x}}{\rm{B}}{{\rm{i}}_{0.325 + x}}{\rm{Ti}}{{\rm{O}}_3}$$ ( $${\rm{BN}}{{\rm{S}}_{0.245 - 1.5x}}{_{0.5x}}{{\rm{B}}_{0.325 + x}}{\rm{T}}$$ , x = 0, 0.02, 0.04, 0.06, and 0.08) lead-free ceramics are selected as the representative. The $${\rm{BN}}{{\rm{S}}_{0.245 - 1.5x}}{_{0.5x}}{{\rm{B}}_{0.325 + x}}{\rm{T}}$$ ceramics are prepared by using pressureless solid-state sintering and achieve large Wrec (1.8 J/cm3) at a low electric field (@110 kV/cm) when x = 0.06. The value of 1.8 J/cm3 is super high as compared to all other Wrec in lead-free bulk ceramics under a relatively low electric field (< 160 kV/cm). Furthermore, a high dielectric constant of 2930 within 15% fluctuation in a wide temperature range of 40–350 °C is also obtained in $${\rm{BN}}{{\rm{S}}_{0.245 - 1.5x}}{_{0.5x}}{{\rm{B}}_{0.325 + x}}{\rm{T}}$$ (x = 0.06) ceramics. The excellent performances can be attributed to the A-site defect engineering, which can reduce remnant polarization (Pr) and improve the thermal evolution of polar nanoregions (PNRs). This work confirms that the $${\rm{BN}}{{\rm{S}}_{0.245 - 1.5x}}{_{0.5x}}{{\rm{B}}_{0.325 + x}}{\rm{T}}$$ (x = 0.06) ceramics are desirable for advanced pulsed power capacitors, and will push the development of a series of Bi0.5Na0.5TiO3 (BNT)-based ceramics with high Wrec and high-temperature stability.
(Ba0.3Sr0.7)x(Bi0.5Na0.5)1-xTiO3(BSxBNT,x= 0.3–V0.8) ceramics were prepared to investigate their structure, dielectric and ferroelectric properties. BSxBNT ceramics possess pure perovskite structure accompanied from a tetragonal symmetry to pseudo-cubic one with the increase ofxvalue, being confirmed by X-ray diffraction (XRD) and Raman results. TheTmcorresponding to a temperature in the vicinity of maximum dielectric constant gradually decreases from 110 °C (x= 0.3) to -45 °C (x= 0.8), acrossTm= 36 °C (x= 0.5) with a maximum dielectric constant (ɛr= 5920 @1 kHz) around room temperature. The saturated polarizationPsgradually while the remnant polarization Pr sharply decreases with the increase ofxvalue, making theP-Ehysteresis loop of BSxBNT ceramics goes slim. A maximum difference betweenPsandPr(Ps-Pr) is obtained for BSxBNT ceramics withx= 0.5, at which a high recoverable energy density (Wrec= 1.04 J/cm3) is achieved under an applied electric field of 100 kV/cm with an efficiency ofη= 77%. Meanwhile, the varied temperatureP-Eloops, fatigue measurements, and electric breakdown characteristics for the sample withx= 0.5 indicate that it is promising for pulsed power energy storage capacitor candidate materials.
Antiferroelectric NaNbO3 (NN) is chosen to modify a compositionally optimized BNT-based relaxor ferroelectric ceramic, (Ba0.3Sr0.7)0.35(Bi0.5Na0.5)0.65TiO3 (BSBNT), having the formula (1 − x)BSBNT–xNN, in which x = 0, 0.02, 0.04, 0.06, 0.08, and 0.10. All dense ceramics are indexed to a pure pseudocubic phase and show strong relaxor characteristics. For the 0.94BSBNT–0.06NN ceramic, a high recoverable energy density of Wrec = 1.25 J cm−3 is obtained at room temperature due to an optimization of the polarization behavior. The temperature dependent P–E hysteresis loop measurement and the fast charge–discharge test under underdamped and overdamped circuit conditions both demonstrate its relatively good temperature stability of energy storage properties. Together with excellent cycling reliability up to 105 cycles, the 0.94BSBNT–0.06NN ceramic has much potential for solid state compact pulsed power capacitors.