A deployable structure can significantly change its geometric shape by switching lattice configurations. Using compliant mechanisms as the lattice units can prevent wear and friction among multi-part mechanisms. This work presents two distinctive deployable structures based on a programmable compliant bistable lattice. Several novel parameters are introduced into the bistable mechanism to better control the behaviour of bistable mechanisms. By adjusting the defined geometry parameters, the programmable bistable lattices can be optimized for specific targets such as a larger deformation range or higher stability. The first structure is designed to perform 1D deployable movement. This structure consists of multi-series-connected bistable lattices. In order to explore the 3D bistable characteristic, a cylindrical deployable mechanism is designed based on the curved double tensural bistable lattice. The investigation of bistable lattices mainly involves four types of bistable mechanisms. These bistable mechanisms are obtained by dividing the long segment of traditional compliant bistable mechanisms into two equal parts and setting a series of angle data to them, respectively. The experiment and FEA simulation results confirm the feasibility of the compliant deployable structures.
Experimental amplification of 10-ns pulses to an energy of 12.2 J at the repetition rate of 1-10 Hz is reported from a diode-pumped room-temperature distributed active mirror amplifier chain (DAMAC) based on Nd:YAG slabs. Efficient power scaling at the optical-optical efficiency of 20.6% was achieved by suppressing the transverse parasitic oscillation with ASE absorbers. To the best of our knowledge, this is the first demonstration of a diode-pumped Nd:YAG active-mirror laser with nanosecond pulse energy beyond 10 joules. The verified DAMAC concept holds the promise of scaling the energy to a 50 J level and higher by adding 10-12 more pieces of active mirror in the chain.
26 April 2024 in International Journal of Mechanical Sciences
A conventional linear guiding mechanism refers to the slide rail guides composed of multiple assemble parts. These guiding mechanisms suffer from many adverse effects, including lubrication, wear and assembly issues. A novel compliant guiding mechanism is proposed in this paper to address these common problems, and this mechanism transfers or transforms motion, force and energy via the deformation of flexible members. This linear guide is designed in a cylindrical shape, and the centre platform moves along its axis (i.e., the motion direction). The proposed linear guide consists of several in-parallel curved compound double parallelogram mechanisms (CDPMs) connected by the same number of decoupling parallelogram mechanisms. Nonlinear finite element analysis (FEA) is used for stiffness analysis and shows that applying the decoupling mechanisms to the detached linear guide (the in-parallel curved CDPMs only) can dramatically improve the stiffness in undesired movement (bearing) directions while keeping its original stiffness along its axis. The nonlinear FEA can capture the stiffness variation by considering all the structural deformation. The issue of bearing-direction stiffness degradation of the detached linear guide is dealt with by applying decoupling mechanisms. The static experimental test is conducted on a 3D printed prototype and shows that the stiffness in the motion direction is nearly constant (linear). The results obtained from the experimental test show good agreement with those obtained from the nonlinear FEA with a maximum error of 9.76%.