Multi-pass equal-channel angular pressing (EACP) was applied to produce ultrafine-grained (UFG) Cu-0.2wt%Mg alloy contact wire with high mechanical/electric performance, aim to overcome the catenary barrier of high-speed trains by maximizing the tension and improving the power delivery. Microstructure evolution and overall properties of the Cu-Mg alloy after different severe-plastic-deformation (SPD) routes were investigated by microscopic observation, tensile and electric tests. The results show that the Cu-Mg alloy after multi-pass ECAP at 473 K obtains ultrafine grains, higher strength and desired conductivity. More passes of ECAP leads to finer grains and higher strength, but increasing ECAP temperature significantly lower the strength increment of the UFG alloy. Grain refinement via continuous SPD processing can endow the Cu-Mg alloy superior strength and good conductivity characteristics, which are advantageous to high-speed electrification railway systems.

Closed-cell AlCu5Mn alloy foam with porosity range of ~45–90% were fabricated by the melt-foaming route. The pore structure of the fabricated Al alloy foam was analyzed and the coupling effect of porosity and cell size on the quasi-static compression behavior of the foam was investigated. The results show that the cell size of the foam decreases with the porosity decline from the view of the contribution rate to the porosity and the hierarchical pore structure characteristics becomes obvious when the foam porosity is low; the compression stress–strain curves of the foams with high porosity (>74%) are serrated due to the large cell size being easy to deform and more strain needed to let the stress recover. Meanwhile, the compression curve of the foams with low porosity (<74%) are smooth without serration, which is attributed to the hierarchical pore structure and less strain needed to let the stress recovery.

The main limitation to the clinical application of magnesium alloys is their too-fast degradation rate in the physiological environment. Bio-corrosion behaviors of the ZE41A magnesium alloy processed by multi-pass equal channel angular pressing (ECAP) were investigated in Dulbecco's Modified Eagle Medium (DMEM) solution, in order to tailor the effect of grain ultrafining on the biodegradation rate of the alloy implant. Hydrogen evolution tests indicated that a large number of ECAP passes decreased the stable corrosion rate of the alloy after the initial incubation period. Potentiodynamic polarization curves showed that more ECAP passes made the corrosion potential nobler and the corrosion tendency lower. Corroded surfaces of the ECAPed alloy indicated a higher resistance toward localized corrosion due to the homogeneous redistribution of broken second phases on the ultrafine-grained Mg matrix. It suggests that grain ultrafining can decrease the biodegradable rate of the magnesium alloy-containing rare-earth elements and tailor the lifetime of the biodegradable material.

A commercial AZ91D Mg alloy, after bulk grain refinement by various passes of equal-channel angular pressing (ECAP), was selected for micro-arc oxidation (MAO) in silicate electrolyte, corrosion testing in 3.5 wt % NaCl solution and morphology analyses. The results showed that a large number of ECAP passes resulted in the homogeneous ultrafine-grained (UFG) Mg substrate with broken second-phases. The high-energy defects in the ECAPed samples lowered the anodizing potential of the MAO process, but the partial discharge was severe for those samples below eight passes. Increasing the ECAP pass, the compactness and thickness of the MAO coating first decreased and then increased. Due to the compact coating and the existence of Mg₂SiO₄, the coated alloy with 16 ECAP passes has a lower corrosion rate and a larger R_t value. Besides the well-known strengthening-toughening effect, grain refinement via multi-pass ECAP can improve surface protection of the MAO coating on the UFG Mg alloy.

By using carbamide granules as the space holder, Mg alloy foams with interconnected pore structures were synthesized by reactive sintering of a mixture of Mg, Al and Zn powders. The effect of Zn/Al on the microstructural evolution and compressive strength of porous Mg-9Al-xZn (x = 1, 5) alloy foams was investigated. The phase diagram simulation approach was used to determine the sintering temperature. The analysis results show that the formation of binary secondary phases or intermetallic compounds is a crucial factor in achieving bonding strength for the porous Mg alloy foams. The intermetallic compounds were formed by solid-state diffusion between the metal powder elements. Mg₁₇Al₁₂ intermetallics was the most stable compound formed in the cell walls of porous Mg alloy foams. The addition of Zn influences the solubility and stability of the intermetallic compound. Thermodynamic calculations show that Mg₁₇Al₁₂ was preferentially formed in the cell walls owing to its high negative enthalpy energy. Moreover, various metastable transition phases may exist in the microstructures, especially in the porous Mg-9Al-5Zn alloy foam. The intermetallic phases act as reinforcing phases, combined with grain refinement, significantly increasing the strength of the foam. At the given relative density of 0.42, the porous Mg-9Al-5Zn alloy foam exhibits the highest yield strength of 9.0 MPa, which is 23% higher than the strength of the porous Mg-9Al-1Zn alloy foam.