This study investigates the effect of welding speed on the microstructure and mechanical properties of pulsed laser lap-welded 0.2 mm 316L stainless steel sheets, commonly used in fuel cell bipolar plates. Welding speeds ranging from 6 to 26 mm/s were tested while other laser parameters remained constant. Results show that increasing welding speed reduces heat input, overlap factor, and weld dimensions. A transition from full to partial penetration occurs beyond 6 mm/s, with no visible heat-affected zone. The weld microstructure features columnar ferrite near fusion boundaries and globular ferrite in the center. Tensile–shear tests reveal that welds maintain higher strength than the base metal up to 22 mm/s, with all fractures occurring in the base material. An optimal speed range of 10–14 mm/s ensures defect-free joints with improved mechanical performance. These findings provide practical guidance for thin-gauge stainless steel welding in fuel cell applications.

The application of lightweight materials in the automotive industry can effectively achieve further weight reduction while maintaining overall structural strength, thereby reducing energy consumption. Currently, friction stir spot welding (FSSW) is the primary method for joining carbon fiber-reinforced polyphenylene sulfide (CF-PPS) with aluminum alloys. This study successfully achieved the connection between 6061-T6 aluminum alloy and CF-PPS using the more operationally convenient friction stir lap welding (FSLW) technique. The primary objective of this study was to explore the potential of expanding the welding technologies available for successfully joining these two dissimilar materials. The joint morphology and strength were analyzed through metallographic observation and tensile testing, and the effects of different welding parameters on the microstructure and mechanical properties of dissimilar joints were studied. The study demonstrated that the successful connection between AA6061-T6 and CF-PPS was primarily attributable to the combined effects of mechanical interlocking and mixture bonding. The joint strength demonstrated a maximum value of 9.41 MPa when the following parameters were set: a rotation speed of 1800 rpm, a welding speed of 40 mm/min, and a plunge depth of 0.2 mm. Although low rotation speed and low welding speed cannot form an effective mechanical interlocking structure for the joint, the failed joints have different causes. When the rotation and welding speeds are fixed, changing the plunge depth cannot change the interlocking structure of the joint. A larger plunge depth will thin the weld and greatly reduce the joint strength.

To reveal the correlation between the mechanical properties of JSC590R/JSC980YL steel pulse-laser-welded joints and welding parameters, this study adopts the response surface analysis test method to determine the welding parameters, and examined the macroscopic morphology, microstructure, microhardness, and tensile properties of the cross-section of the welded joints. The results revealed that the key factors influencing welded joints quality, in descending order of importance, are distance to focus, welding speed, and single-pass heat input. The interaction between these factors is extremely significant. The weld zone of the joints is primarily composed of lath martensite, while the heat-affected zone is composed of ferrite, martensite, carburite, tempered martensite, and residual austenite. The optimized welding parameters align with actual expectations, yielding an average engineering stress of 616.9 MPa for the joint. Notably, the fracture area shifts from the heat-affected zone of JSC590R to the base material.