Microwave radiometer data is affected by many factors during the imaging process, including the antenna pattern, system noise, and the curvature of the Earth. Existing deconvolution methods such as Wiener filtering handle this degradation problem in the Fourier domain. However, under complex degradation conditions, the Wiener filtering results are not accurate. In this paper, a convolutional neural network (CNN) model is proposed to solve the degradation problem. The deconvolution procedure is defined as a regression problem in the spatial domain that can be solved with deep learning. For the real inverse process of microwave radiometer data, the CNN model has a more powerful reconstruction ability than Wiener filtering due to the multi-layer structure of the CNN, which enables the multiple feature transform of the data. Additionally, the complex degradation factor during the imaging process of a microwave radiometer can be solved with general framework-based learning. Experimental results demonstrated that the CNN model gains about 5 dB at the peak signal-to-noise ratio compared to the Wiener filtering deconvolution method, and can better distinguish the measured data.
A passive microwave instrument will be carried by China’s geostationary microwave satellite. A microwave hyper-spectral band included by the instrument ranges from 52.6 to 57.3 GHz, and totally has 89 channels in this spectral domain. The design of the hyper-spectral band is described from the aspects of scientific objectives and specifications. The weighting functions for each channel are calculated utilizing radiative transfer simulations under clear sky conditions. Then, the information content as well as the degree of freedom for signal are computed and analyzed to characterize this hyper-spectral sounding for atmospheric temperature profiling. Both the vertical distribution of the weighting functions and the width of retrieval averaging kernels indicate that the hyper-spectral band can provide more denser sampling for atmospheric temperature. The information content for the hyper-spectral band is approximately 46% higher than that of the ATMS-type channel 3 to 15, indicating that hyper-spectral measurement can improve the accuracy of retrieval. The most informative channels mainly locate near 57 GHz, having good consistency with the existing channels. The height range where the retrieval using the hyper-spectral observations is sensitive to the true profile, begins from about 800 to 1 hPa. Some channels can be considered as alternatives to each other since they have very similar information content and weighting functions. These results are expected to provide a valuable reference for future applications of the microwave hyper-spectral measurements.
19 May 2022 in International Journal of Remote Sensing
In this study, we evaluate the two years (from 1 May 2019 to 30 April 2021) global operational sea surface wind speed (SWS) product of Fengyun-3D (FY-3D) polar-orbit meteorological satellite microwave radiation imager (MWRI) using ERA-5 reanalysis data. The total mean bias error (MBE), mean absolute error (MAE) and correlation coefficient of FY-3D/MWRI SWS product are −0.432 ± 3.09 m/s, 1.896 ± 2.50 m/s and 0.76, respectively. The current FY-3D/MWRI SWS data are comparable with the wind speed data of ERA-5 at most of the sea areas, especially the farther offshore sea areas. However, we still find significant overestimations (more than 5 m/s) near the coasts and typical differences in horizontal MBE values in different ascending and descending orbits. Besides, the rainy pixels as another negative impact factor are also common in FY-3D/MWRI SWS product, which can induce manifest overestimations of SWS. Therefore, the future FY-3/MWRI SWS operational algorithm should further develop a rigorous and robust quality-control module and a joint rainy pixel identification algorithm to better eliminate the unreasonable (or anomalous) pixels and rainy pixels. Moreover, the detailed evaluation on the on-orbit calibration performance of MWRI sensor is also necessary for both ascending and descending orbits.