High initial glucose concentrations may inhibit glucose utilization and decrease ethanol fermentation efficiency. To minimize substrate inhibition, the effects of feeding yeast with different glucose concentrations on the ethanol production by batch and fed-batch cultures in a 5-L fermentor were investigated. When a batch culture system with Saccharomyces cerevisiae was used for ethanol fermentation with glucose concentrations ranging 10–260 g/L, as a result, 0.2–7.0 g/L biomass and 5.1–115.0 g/L ethanol were obtained. However, substrate inhibition was observed with the initial glucose concentrations greater than 200 g/L in the fermentative media. When a fed-batch culture system (an initial glucose concentration of 180 g/L and total glucose concentration of 260 g/L) was performed, the maximum ethanol concentrations and ethanol yield were significantly higher than those of the batch cultures. The cell biomass, maximum ethanol concentration, and ethanol yields for the fed-batch fermentation cultures were 8.3 g/L, 130.1 g/L and 51% (100% of the theoretical value), respectively. The results indicated that high ethanol concentration and ethanol yield could be achieved by the fed-batch cultures with total glucose concentrations up to 260 g/L.

The atmospheric-pressure non-thermal dielectric barrier discharge (DBD) plasma has recently emerged as an efficient decontamination method for the food safety enhancement. Thus the objective of this study was to evaluate the effectiveness of a simple DBD plasma treatment, with a relatively low-frequency power supply operating at 60 Hz, for microbial inactivation. A parametric study of operating conditions for bacterial inactivation was conducted using nutrient agar inoculated with Escherichia coli (2.28--6.28 log CFU/ml). The microbial log reduction was enhanced with increasing input power (30, 50, 70 W) and plasma exposure time (0, 1, 3, 5, 7 min). The inactivation effect was increased by decreasing inter-electrode gap (2, 1.5, 1 cm) and by reducing the initial microorganism concentration. Accordingly, a DBD plasma treatment at 50 W for 10 min could lead to complete killing of E. coli and partial inactivation of Listeria innocua on cheese (mean log reduction: 4.75 ± 0.02 and 0.72 ± 0.01, respectively). The decontamination efficacy of DBD plasma was affected by the types of microorganisms. The changes in hardness and color of cheese were unnoticeable after 10 min treatment with a power of 50 W. Overall, the results suggested that the DBD plasma can be potentially exploited to improve the food safety.