Prasit Girish Agnihotri

Dr. Prasit Girish Agnihotri

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

6 November 2017 in Applied Water Science
Verified
Journal Article
Open access
PDF file
MPMayuri Prajapati
Mayuri Prajapati
NJNamrata Jariwala
Namrata Jariwala
PAPrasit Girish Agnihotri
Prasit Girish Agnihotri
The present study deals with the groundwater quality with respect to F− in the Mandavi Taluka of Surat city with an objective to analyze the spatial variability of ground water quality parameter. A total 57 representative groundwater samples from different bore wells and hand pumps were collected during pre-monsoon. Samples were analyzed for various physiochemical parameters including fluoride. GIS technique is adopted to prepare DEM and spatial distribution map of fluoride to represent fluoride concentration in the study area. Results obtained from analysis with GIS mapping reveal that fluoride in the study is mainly attributed to geogenic source.


7 December 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
APAzazkhan I. Pathan
Azazkhan I. Pathan
Komali KantamaneniKomali Kantamaneni
Komali Kantamaneni
PAPrasit Girish Agnihotri
Prasit Girish Agnihotri
DPDhruvesh Patel
Dhruvesh Patel
SSSaif Said
Saif Said
SSSudhir Kumar Singh
Sudhir Kumar Singh
Today, inhabitants residing in floodplains face a serious and perpetual threat of flooding. Flooding causes fatalities and considerable property damage in metropolitan areas. Therefore, robust structural measures need to be adopted to eliminate flood catastrophe. Structural measures in the floodplain are the most promising solutions. However, there are cost-associated factors for proposing a flood retention plan. Navsari city (98.36 km2, area extent) of Gujarat was used as a case study to investigate the impact of mesh grid structures (100 m, 90 m, and 50 m) along with structural measures for the preparation of a flood retention plan. The HEC-RAS 2D hydrodynamic model was performed for the Purna River. The output of the model was characterized by four different scenarios: (i) Without weir and levees (WOWL), (ii) With weir (WW), (iii) With levees (WL), and (iv) With weir and levees (WWL). The statistical parameters (R2, RMSE, NSE, inundation time, and inundation area) were determined to evaluate model accuracy. The outcome of the model revealed that a 50 m size mesh grid exhibited more accurate results, yielding high NSE and R2 values (0.982 and 0.9855), a low RMSE value (0.450 m), and a smaller inundation area (114.61 km2). The results further revealed that the WW scenario was the most effective flood retention measure as it delayed the flood water for up to 16 h, and managed the flood with the WOWL case. Moreover, the mean error (WW scenario) estimated from profiles 1 and 2 ranged from (−0.7 to 0.62) and from (−0.1 to 0.02 m), respectively, which were evaluated as very low when compared with other scenarios. The novel scenario-based flood retention plan emphasizing the stability of mesh grid structures using the hydrodynamic model can be applied to any other region around the globe to recommend efficacious structural flood measures for flood decision making systems.


1 July 2024 in Journal of the Geological Society of India
Verified
Journal Article
Closed access
PDF file
NKNitin Singh Kachhawa
Nitin Singh Kachhawa
PAPrasit Girish Agnihotri
Prasit Girish Agnihotri
Event-based hydrologic models are very useful to predict peak flow and flood volume, particularly in semi-arid regions. In HEC-HMS software methods selected for loss, transformation, routing and base flow were soil conservation service (SCS) curve number (CN), SCS unit hydrograph (UH), Muskingum and recession, respectively. A total of six extreme events from the year 2011 to 2019 were selected, out of which four were used for calibration, one each for validation and application. The developed model can identify the peak discharge and flood volume satisfactorily at 2-hour intervals. During validation performance statistical viz. percent difference in runoff volume (DV%), percent difference in peak flow (DP%), Nash Sutcliffe Efficiency (NSE), percent bias (%BIAS), coefficient of determination (R2) and ratio of the root mean square error to the standard deviation (RSR) were −3.68, −25.93, 0.52, 3.52, 0.53 and 0.69, respectively. The sensitivity analysis revealed that the CN is the highest sensitive parameter followed by the storage time constant (K), which affects the peak discharge. Whereas, for flood volume, CN is the highest sensitive parameter followed by the recession constant (Rc). The relative sensitivity of CN for peak flow and flood volume were 2.11 and 1.73, respectively. Out of center maximum rainfall (CeMR) and cumulative maximum rainfall (CuMR) distribution, CeMR distribution has given higher peak discharge for all rainfall duration. The rainfall characteristics of the 2016 flood event suggest a hypothetical 9-day rainfall duration can be considered. The 9-day event with CeMR gives 70.64% higher discharge as compared to the observed peak discharge during the 2016 flood.