Cogeneration power plants have already been operated in the Czech Republic for several decades. These cogeneration power plants have been mostly operated with original technologies. However, these original technologies have to be continuously innovated during the entire operation time. This paper is focused on one of the possible innovations, which could lead to better sustainability and improved flexibility of the cogeneration power plants. Backpressure turbines are still used in many cogeneration power plants. However, backpressure turbines are currently losing suitability for cogeneration power plants, because they always need sufficient heat demand for optimal operation. Backpressure turbines rapidly lose efficiency when facing a lack of heat demand, i.e., mostly in summer season. Currently, condensing turbines are a preferable option for cogeneration power plants, which generally achieve less effective operation, as condensing turbines are able to operate with optional heat demand. Therefore, backpressure turbines are often replaced by condensing turbines with regulated outputs. In spite of the current trend, this article will present an innovative topology, which retains the original backpressure turbine with the addition of the organic Rankine cycle for residual energy utilization.
Reliable assessments of the operational conditions of LED lighting systems are important for maintenance planning and asset management. Conventional Wear Index (WI) approaches typically assume a fixed daily number of switching cycles, which may not accurately reflect actual operating conditions. This study proposes a machine learning-based framework for operational Wear Index estimation using measured switching-cycle data collected from an LED lighting installation. Daily energy consumption and operating time were predicted using Multiple Linear Regression (MLR), Random Forest (RF), Long Short-Term Memory (LSTM), and Backpropagation Neural Network (BPNN) models. The models were evaluated using consistent performance metrics, and the BPNN achieved the highest predictive accuracy and was subsequently applied to the Wear Index calculation. Incorporating measured daily switching activity instead of the conventional fixed assumption of nine switching cycles per day resulted in a 17.80% higher cumulative Wear Index. This result demonstrates that the representation of switching activity can materially influence operational wear assessment. The proposed framework provides a practical data-driven approach for estimating operational wear under actual operating conditions and may support maintenance planning in intelligent lighting systems. Since the results are based on a single monitored installation, they should be interpreted as a case study.