Post-mortem computed tomography (PMCT) and PMCT angiography (PMCTA) are rapidly becoming effective and practical methods in forensic medicine. In this article, the authors introduce a whole-body PMCTA approach involving left ventricle cardiac puncture. This procedure was performed in 9 males and 3 females. PMCT was performed first. Then a biopsy core needle was used for a percutaneous puncture into the left ventricle through the intercostal area under CT guidance. 1000 mL of contrast media (diatrizoate meglumine and normal saline [0.9%] at 1:2 ratio) was injected at a rate of 50 mL/8 s, followed by CT scan. Visualization of systemic arteries was achieved in 11 cases, while only partial visualization was achieved in 1 case, which may have been related to incomplete thawing of the cadaver. PMCTA results revealed no vascular diseases and abnormalities in 10 victims. Among the 10 victims, 4 post-scan autopsies were performed and found no vascular abnormalities, consistent with the PMCTA results. Autopsy of the other 6 victims were refused by the relatives. PMCTA revealed signs of internal carotid artery aneurysm inside the sphenoid sinus in one victim, which was confirmed by autopsy. PMCTA results of another victim showed signs of stenosis and blockage of the distal part of the right vertebral artery and basilar artery. Thromboembolism of those arteries was found during autopsy. Compared with other existing PMCTA methods for examination of vascular injuries and diseases, this technique involves simple procedures, is less time consuming, has lower associated costs, does not require specialized equipment, provides adequate imaging quality, and is suitable for centres not equipped with cardiopulmonary bypass machines or other specialized equipment.

The mechanical properties and material constitution of the aorta are important in forensic science and clinical medicine. Existing studies on the material constitution of the aorta do not satisfy the practical requirements of forensic and clinical medicine, as the reported failure stress and failure strain values for human aortic materials have a high dispersion. In this study, descending thoracic aortas were obtained from 50 cadavers (dead within 24 h) free of thoracic aortic disease, aged from 27 to 86 years old, which were divided into six age groups. The descending thoracic aorta was divided into proximal and distal segments. A customized 4-mm cutter was used to punch a circumferential and an axial dog-bone-shaped specimen from each segment; the aortic ostia and calcification were avoided. Instron 8,874 and digital image correlation were used to perform a uniaxial tensile test on each sample. Four samples from each descending thoracic aorta produced ideal stress-strain curves. All parameter-fitting regressions from the selected mathematical model converged, and the best-fit parameters of each sample were obtained. The elastic modulus of collagen fiber, failure stress, and the strain showed a decreasing trend with age, while the elastic modulus of elastic fiber showed an increasing trend with age. The elastic modulus of collagen fiber, failure stress, and strain of circumferential tensile were all greater than those for axial tensile. There was no statistical difference in model parameters and physiological moduli between the proximal and distal segments. The failure stress and strain in the proximal circumferential, distal circumferential, and distal axial tensile were all greater for the male group than for the female group. Finally, the Fung-type hyperelastic constitutive equations were fitted for the different segments in different age groups.