We report a coherent beam combining technique using a specific quasi-reinforcement learning scheme. A neural network learned by this method enables the tailoring and locking of a tiled beam array on any phase map. We present the experimental implementation of on-demand phase control by a neural network in a seven-fiber laser array. This servo loop needs only six phase corrections to converge to the desired phase set at any profile, with a bandwidth higher than 1 kHz. Moreover, we demonstrate the dynamical feature of adaptive phase control, performing sequences of controlled phase sets. It is the first time, to the best of our knowledge, that an actual array of seven-fiber amplifiers has been successfully phase-locked and controlled by machine learning.
There is an upward trend in using multimode fiber for an increasing number of applications such as optical telecommunication, endoscopic imaging or laser beam shaping, which require knowledge of the fiber characteristics. In this paper, we propose a new method for learning the complex transmission matrix of a multimode fiber from a set of speckled output patterns without interferometric setup. In a first step, our method finds a model to predict the intensity pattern of a coherent beam at the distal end of the multimode fiber. In a second step, this model is improved by using some additional intensity images in the far field, resulting in the prediction of the actual 3D complex field leaving the multimode fiber, without the use of a reference beam. Our two-step method was validated numerically and experimentally with a standard 50μm-core diameter step-index fiber guiding up to 140 LP modes at 1064nm. Experimentally, using the validation set, we obtain a similarity between predicted and true speckle images at fiber output of 99.2% and 98.5% respectively in the near field and far field, proving the accuracy of the retrieved complex transmission matrix. Finally, we successfully demonstrated projection of images simultaneously in two planes as proof of complex field shaping.
We show here brand-new possibilities of lab-in-lab fabrication while combining holographic photopolymerization and microfluidics. One shot real-time 3D-printing can produce 3D architectured microchannels, or free-standing complex micro-objects eventually in flow. The methodology is very versatile and can be applied to e.g., acrylate resins or hydrogels.
26 September 2008 in Journal of Optics A: Pure and Applied Optics