The source of iron material and the mineralization process of iron skarn deposits within the eastern North China Craton are ambiguous. In this study, we present new mineral chemical data of the Jinling skarn deposit, located in western Shandong Province, east China. Based on the petrography study and mineral chemical data, we suggest that the Jinling iron skarn deposit is hydrothermal and the metallogenic iron is enriched by leaching of Fe-rich fluids derived from primitive magmatic melt from the solidified diorites. The Jinling iron skarn deposit formed as a result of several mineralization processes: (1) Fe-rich hydrothermal fluids exsolved from a hydrous parental magma that was characterized by high iron content, oxygen fugacity (fO₂), and salinity; (2) the Fe content of the fluids was augmented during the alkali metasomatism stage via the leaching of Fe from the solidified dioritic rocks; (3) diopside and garnet in skarns formed under relatively alkaline and oxidizing conditions during the later prograde skarn stage; (4) during the retrograde skarn stage, amphibole, chlorite, epidote, phlogopite, serpentine, biotite, and chlorite formed under more oxidizing conditions, and subsequent mixing of the Fe-rich fluids with meteoric water triggered the precipitation of the massive magnetite; and (5) the final sulfide–carbonate stage was involved in the formation of carbonate and sulfide minerals as a result of a change in conditions from oxidizing to reducing.

The Luxi district presents an exceptional research area for the investigation of the significant role played by magma exsolution fluids in the mineralization process of Au–Cu deposits. A particularly noteworthy occurrence within this region is the Yi’nan Tongjing Au–Cu skarn deposit, situated in the central-southern part of the Luxi district. This deposit primarily occurs in the contact zone between the early Cretaceous Tongjing complex and the Proterozoic to Cambrian sequences. The ore formation process observed in this deposit can be categorized into three distinct stages: (I) thermal metamorphism, (II) prograde alteration, and (III) retrograde alteration. The retrograde alteration stage is further divided into four sub-stages: late skarn (III-1), oxide (III-2), sulfide (III-3), and late quartz-calcite (III-4). It is primarily during the III-3 sub-stage that gold mineralization occurs. Petrographic analysis has identified three types of fluid inclusions (FIs) within garnet, quartz, and calcite grains. These include liquid-rich two-phase aqueous FIs, vapor-rich two-phase aqueous FIs, and halite-bearing multi-phase FIs. The homogenization temperatures of fluid inclusions from stages II, III-3, and III-4 range between 430–457 °C, 341–406 °C, and 166–215 °C (first to third quartiles), respectively. The garnet samples from stage II exhibit hydrogen and oxygen isotope compositions (δ¹⁸O_H2O = 6.8‰ and δD = −73‰) that are indicative of a typical magma source. However, the hydrogen and oxygen isotopes of sub-stages III-1, III-2, and III-3 (δ¹⁸O_H2O = 7.32‰ to 9.74‰; δD = −107‰ to −81.9‰) fall below the magma water box while the hydrogen and oxygen isotope values of III-4 (δ¹⁸O_H2O = −5.3‰ to −0.9‰ and δD = −103.8‰ to −67‰) tend to move towards the meteoric water line. Furthermore, the ore-forming fluid displays characteristics of a mixture between the crustal and mantle fluids. The Tongjing complex occurred along a weakened fault zone, initiating a process of thermal metamorphism upon contact with the wall rock. This thermal metamorphism resulted in the formation of diverse assemblages, including hornfels, reaction skarns, and skarnoids. Subsequently, the upward movement of ore-forming fluids triggered exsolution which led to the establishment of a high-temperature, medium-salinity NaCl–H₂O system with a single phase at depths ranging from 1–3 km. This marked the formation of the prograde alteration stage. Afterward, the ore-forming fluid underwent water–rock interactions and the admixture of meteoric water at a depth of 1–2 km. These processes facilitated phase separation, commonly referred to as boiling, resulting in the transformation of the ore-forming fluid into higher salinity fluids and lower-density gases. This evolutionary transition ultimately induced the precipitation and liberation of gold and copper from the fluid.

The Guodian Fe deposit is representative of the newly discovered Qihe–Yucheng high-grade Fe skarn ore cluster, Luxi Block, eastern North China Craton (NCC). The age of the Pandian Fe deposit remains elusive, which hinders the understanding of its metallogenic tectonic background. Phlogopites are recognized in syn-ore stages, and they are closely associated with magnetite in the Guodian skarn Fe deposit. Here, we carried out ⁴⁰Ar/³⁹Ar dating of phlogopite, which can place a tight constraint on the timing of Guodian iron mineralization and shed light on the geodynamic framework under which the Guodian Fe deposit formed. Ore-related phlogopite ⁴⁰Ar/³⁹Ar dating yielded ⁴⁰Ar/³⁹Ar plateau ages of 131.6 ± 1.7 Ma at 890–1400 °C, with the corresponding isochron age being 131.1 ± 2.6 Ma. These two ages are consistent within the error, indicating that they can represent the formation age of the Guodian iron deposit. The mineralization age overlaps the zircon U-Pb age of 124.4 Ma for ore-related Pandian pluton. This age consistency confirms that the iron skarn mineralization is temporally and likely genetically related to Pandian diorite. The present results, coupled with existing isotopic age data, indicate the Guodian skarn Fe deposit formed contemporaneously with large-scale skarn iron mineralization over the Luxi Block in the Late Mesozoic. The available data demonstrated that the eastern NCC was “destructed” in the Late Mesozoic, as marked by voluminous igneous rocks, faulted-basin formation, high crustal heat flow, and widespread metamorphic core complexes in the eastern part of the NCC. It is thus suggested that the Guodian Fe skarn deposits, together with other deposits of similar ages in the Luxi Block and even in the eastern NCC, were products of this craton destruction. Lithospheric extension and extensive magmatism related to the craton destruction may have provided sufficient heat energy, fluid, chlorine, and Fe for the formation of the Fe deposit.

Jinling complex pluton is a key part of the Mesozoic magmatic belt in the eastern North China Craton. However, its petrogenesis is still being debated. The Jinling complex, mainly composed of biotite diorites, hornblende diorite, augite diorites, (quartz) monzonites, and quartz diorites, is outcropped in Huashan and Heitieshan. This paper studies the zircon geochronology, zircon Hf isotope, and Sr-Nd-Pb isotope of quartz monzonites. The samples have high contents of Cr, Ni, V, Al₂O₃, Ba, Sr, and are enriched in LREEs, LILEs (K, Ba, Sr), depleted in HREEs, and HFSEs (Nb, Ta, Ti). The samples with captured zircons of ~2.5 Ga yield a weighted mean age of ~127 Ma, and the zircons have negative values of ε_Hf(t) from −3.2 to −9.4 while the ratios of ²⁰⁸Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, ²⁰⁶Pb/²⁰⁴Pb 37.75~38.15, 15.41~15.43, 17.59~17.98, respectively. The ratios of Th/U are from 3.77 to 3.82, while the values of μ and ω are 9.18 and from 35.72 to 36.15. Meanwhile, the ratios of ⁸⁷Sr/⁸⁶Sr are higher than the ones of the mantle. Geochemical and isotopic features indicate that the quartz monzonites derived from the subcontinental lithospheric mantle that probably assimilated ancient NCC upper crust materials (~15–20%) during the magma ascent in a lithospheric extension setting.

The Sanchahe iron-gold deposit in western Shandong province is located in the southeast of the North China Craton. The skarn type of iron-gold deposit (without copper) is located in the contact belt between pyroxene diorites and Ordovician limestone xenoliths. The zircon U-Pb age of pyroxene diorites is 138.4 ± 1.2 Ma belonging to the Early Cretaceous. Pyroxene diorites (Rittmann index σ = 2.2~2.5) belong to the calc-alkaline series and the SiO₂ content is 55~59%. Furthermore, pyroxene diorites are characterized by high Mg and Na contents and high contents of Sc, Cr, Co, and Ni, indicating that it has a geochemical affinity with mantle-derived magma. All of the samples are enriched in light rare earth elements (LREEs) and depleted in heavy rare earth elements (HREEs), with a weak Eu-negative anomaly. They are also enriched in Cs, Ba and Sr and depleted in high field strength elements (HFSEs) (Nb, Ta, Zr), indicating the involvement of some crustal materials. The whole-rock (⁸⁷Sr/⁸⁶Sr)_I values are 0.70824~0.70891, and the ε_Nd(_t) values are from −8.1 to −12.5. Two-stage model ages of T_DM2 are 1591~1928 Ma. The εHf(t) values range from −7.0 to −17.4, and the two-stage model ages of T_DM2 range from 1629 to 2297 Ma, indicating that the magma was derived from Mesoproterozoic to Neoarchean crusts. Combined with Pb isotopic characteristics, pyroxene diorites may be generated by the partial melting of the enriched lithospheric mantle, which had been metasomatized by the ancient lower crust materials of the North China Craton and formed in the strong extensional tectonic setting linked with lithospheric thinning, which may be caused by the rollback of the Pacific plate after subduction.

The Early Cretaceous intermediate intrusive rocks have important significance in understanding the crust–mantle interaction, iron mineralization, and tectonic evolution in the western Shandong Peninsula. In this study, we present new zircon U–Pb ages, and Hf isotope, whole-rock geochemistry, Sr–Nd isotopes, and the mineral chemistry of the diorite-porphyrite in the southern Xintai area, mid-western Shandong Peninsula. The diorite-porphyrite formed at ca. 125 Ma. They have intermediate SiO₂ (59.57–62.29 wt.%) and MgO (2.78–3.58 wt.%) contents, high Mg# values (53–56), high Sr (589–939 ppm) and low Y (9.2–10.8 ppm) contents, and high Sr/Y ratios (54–94), showing adakitic affinity. The diorite-porphyrite exhibits lower zircon ε_Hf(t) values (−30.1 to 7.5) and whole-rock ε_Nd(t) values (−3.5 to −6.0), with (⁸⁷Sr/⁸⁶Sr)_i ratios of 0.70514–0.70567. We suggest that the diorite-porphyrite was derived from the partial melting of the local delamination of lower continental crust and then by the interaction with the enriched lithospheric mantle. The genesis of diorite-porphyrite may be related to the rollback process of the Paleo-Pacific slab in the Early Cretaceous. This geodynamic process induced the melting of the enriched lithospheric mantle, subducted oceanic crust, and local delamination of lower continental crust, which produced different types of adakitic magmatism in the western Shandong Peninsula.