Han Zhang

Mr. Han Zhang

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 April 2022 in Metals
Verified
Journal Article
Open access
PDF file
HZHan Zhang
Han Zhang
CLChang’an Li
Chang’an Li
CZChuanhui Zhu
Chuanhui Zhu
In the present paper, the continuous-drive friction welding (CDFW) technology has been successfully applied to join the U75V rail steel. The base metal (BM) of U75V rail steel is lamellar pearlite, and the weld zone could be clearly divided into three subzones (i.e., heat affected zone, thermo-mechanical affected zone (TMAZ), and central weld zone (CWZ)). Electron back-scattered diffraction examinations revealed the martensitic evolution in TMAZ and CWZ, suggesting that the experienced high temperature, severe plastic deformation, and fast cooling rate induce the microstructure transition during the CDFW process. The hard and brittle martensite structure explains the raised microhardness profiles and the reduced impact absorption energy of the as-welded joints. The CDFW process parameters govern the joint properties via influencing the welding heat input and plastic deformation by spindle speed and friction pressure at the friction stage, and the plastic deformation layer (flash) extrusion by upsetting pressure at the upsetting stage. More favorable results could be obtained at small set values of spindle speed (1800 rpm) and friction pressure (75 MPa) with less heat input and plastic deformation, and a large set value of upsetting pressure (175 MPa) with more flash extrusion, whose tensile strength reached 94.3% of that of the BM.

20 July 2022 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
YZYang Zhou
Yang Zhou
WWWei Wang
Wei Wang
HZHan Zhang
Han Zhang
XZXingwen Zheng
Xingwen Zheng
LLLiang Li
Liang Li
GXGuangming Xie
Guangming Xie
Due to the challenging communication and control systems, few underwater multi-robot coordination systems are currently developed. In nature, weakly electric fish can organize their collective activities using electrocommunication in turbid water. Inspired by this communication mechanism, we developed an artificial electrocommunication system for underwater robots in our previous work. In this study, we coordinate a group of underwater robots using this bio-inspired electrocommunication. We first design a time division multiple access (TDMA) network protocol for electrocommunication to avoid communication conflicts during multi-robot coordination. Then, we revise a distributed controller to coordinate a group of underwater robots. The distributed controller on each robot generates the required controls based on adjacent states obtained through electrocommunication. A central pattern generator (CPG) controller is designed to adjust the speed of individuals according to distributed control law. Simulations and experimental results show that a group of underwater robots is able to achieve coordination with the developed electrocommunication and control systems.

6 September 2022 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
HZHan Zhang
Han Zhang
WWWei Wang
Wei Wang
QWQinghao Wang
Qinghao Wang
Chen WangChen Wang
Chen Wang
And Guangming XieAnd Guangming Xie
And Guangming Xie
Current underwater communication typically includes acoustic, optical, radio frequency, and magneto-inductive channels. Wireless sensor networks are usually built on these four channels. However, these underwater networks are vulnerable to complex aquatic environments. In nature, weakly electric fish are able to communicate electrically (called electrocommunication), which is ‘invisible’ to most other animals, to convey information such as species, courtship, and environmental conditions. Inspired by the electrocommunication of weakly electric fish, an artificial electrocommunication system that uses an electric induction (EI) channel has been developed recently. This paper further develops an underwater networking system using the EI channel, which addresses the solutions to collision avoidance and routing problems during electrocommunication networking. In particular, a CSMA/CA-based electrocommunication mechanism was used to solve the collision problem. Then, a single-hop underwater electrocommunication network (UEN) was established. Furthermore, a complex multi-hop UEN was implemented on the basis of the ad hoc on-demand distance vector routing protocol. Theoretical analysis, simulations, and experiments were conducted to demonstrate the effectiveness of the developed UEN. Extensive results show that the UEN holds the potential to serve as a complement to future underwater wireless sensor networks.

28 March 2024 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Verified
Journal Article
Closed access
HZHan Zhang
Han Zhang
JXJiaqi Xie
Jiaqi Xie
CLChang’aN Li
Chang’aN Li
ZZZhiming Zhu
Zhiming Zhu
This article presents a rotatory friction welding (RFW) method for U75V steel rail, aiming to mitigate challenges related to property discrepancies between the as-welded joints and the rail base metal (BM) and to narrow the heat-affected zone (HAZ) in conventional flash-butt welding (FBW) joints. A rotational intermediate plate is designed for rails with non-axisymmetric cross-sections, necessitating stationary during RFW. Advantages include achieving a relatively uniform welding heat input and maintaining the peak temperature of the contact interface near A 1 . To implement these concepts, a 2D finite element (FE) model for the RFW process of U75V rail steel rods was established and validated through experiments with identical process parameters. Microstructure predictions derived from continuous cooling transformation diagram confirm that ferrite microstructure is formed near A 1 through rail steel RFW. Subsequently, a 3D FE model for intermediate plate RFW steel rails is developed to explore appropriate process parameter combinations. A suitable process parameters combination was identified, ensuring the peak temperature of the majority model contact interface does not exceed A 1 , resulting in a 76.7% reduction in HAZ (from ∼50 to 11.66 mm), and axial shortening of 8.10 mm, a significant decrease compared to the usual burn-off (30–40 mm) during FBW. These findings underscore the efficacy of this innovative welding solution and emphasize the significance of simulation technology in process optimization.