Shakila Parveen Asraf ali

Dr. Shakila Parveen Asraf ali

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 May 2025 in Polymers
Verified
Journal Article
Open access
TPThirukumaran Periyasamy
Thirukumaran Periyasamy
Shakila Parveen Asraf aliShakila Parveen Asraf ali
Shakila Parveen Asraf ali
JLJaewoong Lee
Jaewoong Lee
Food packaging plays a crucial role in preserving freshness and prolonging shelf life worldwide. However, traditional packaging primarily acts as a passive barrier, providing limited protection against spoilage. Packaged food often deteriorates due to oxidation and microbial growth, reducing its quality over time. Moreover, the majority of commercial packaging relies on petroleum-derived polymers, which add to environmental pollution since they are not biodegradable. Growing concerns over sustainability have driven research into eco-friendly alternatives, particularly natural-based active packaging solutions. Among the various biopolymers, cellulose is the most abundant natural polysaccharide and has gained attention for its biodegradability, non-toxicity, and compatibility with biological systems. These qualities make it a strong candidate for developing sustainable packaging materials. However, pure cellulose films have limitations, as they lack antimicrobial and antioxidant properties, reducing their ability to actively preserve food. To tackle this issue, researchers have created cellulose-based active packaging films by integrating bioactive agents with antimicrobial and antioxidant properties. Recent innovations emphasize improving these films through the incorporation of natural extracts, polyphenols, nanoparticles, and microparticles. These enhancements strengthen their protective functions, leading to more effective food preservation. The films are generally classified into two types: (i) blend films, where soluble antimicrobial and antioxidant substances like plant extracts and polyphenols are incorporated into the cellulose solution, and (ii) composite films, which embed nano- or micro-sized bioactive fillers within the cellulose structure. The addition of these functional components enhances the antimicrobial and antioxidant efficiency of the films while also affecting properties like water resistance, vapor permeability, and mechanical strength. The continuous progress in cellulose-based active packaging highlights its potential as a viable alternative to conventional materials. These innovative films not only extend food shelf life but also contribute to environmental sustainability by reducing reliance on synthetic polymers. This review deals with the development of functional biopolymer films with antimicrobial and antioxidant properties towards sustainable food packaging.

22 June 2021 in Polymers
Verified
Journal Article
Open access
PDF file
TPThirukumaran Periyasamy
Thirukumaran Periyasamy
Raji AtchudanRaji Atchudan
Raji Atchudan
Shakila Parveen Asraf aliShakila Parveen Asraf ali
Shakila Parveen Asraf ali
SMSANTHAMOORTHY MADHAPPAN
SANTHAMOORTHY MADHAPPAN
Ramkumar VanarajRamkumar Vanaraj
Ramkumar Vanaraj
Seong-Cheol KimSeong-Cheol Kim
Seong-Cheol Kim
Supercapacitors store energy either by ion adsorption or fast surface redox reactions. The capacitance produced by the former is known as electrochemical double layer capacitance and the latter is known as pseudo-capacitance. Carbon materials are found to be attractive materials for energy storage, due to their various micro-structures and wide source of availability. Polybenzoxazine (Pbz) is used as a source to produce carbon materials, due to the fact that the obtained carbon will be rich in N and O species for enhanced performance. Moreover, the carbon materials were produced via template-free method. In general, activation temperature plays a main role in altering the porosity of the carbon materials. The main purpose of this study is to find the suitable activation temperature necessary to produce porous carbons with enhanced performance. Considering these points, Pbz is used as a precursor to produce nitrogen-doped porous carbons (NRPCs) without using any template. Three different activation temperatures, namely 700, 800 and 900 °C, are chosen to prepare activated porous carbons; NRPC-700, NRPC-800 and NRPC-900. Hierarchical micro-/ meso-/macropores were developed in the porous carbons with respect to different activation temperatures. PBz source is used to produce carbons containing heteroatoms and an activation process is used to produce carbons with desirable pore structures. The surface morphology, pore structure and binding of heteroatoms to the carbon surface were analyzed in detail. NRPCs produced in this way can be used as supercapacitors. Further, electrodes were developed using these NRPCs and their electrochemical performance including capacitance, specific capacitance, galvanic charge/discharge, impedance, rate capability are analyzed. The obtained results showed that the activation temperature of 900 °C, is suitable to produce NRPC with a specific capacitance of 245 F g−1 at a current density of 0.5 A g−1, that are attributed to high surface area, suitable pore structure and presence of heteroatoms.

9 January 2026 in Polymers
Verified
Journal Article
Open access
PDF file
BKBuvaneswari Kuppusamy
Buvaneswari Kuppusamy
FIFathima Rigana Mohamed Ismail
Fathima Rigana Mohamed Ismail
PBPreethi Balakrishnan
Preethi Balakrishnan
Seong-Cheol KimSeong-Cheol Kim
Seong-Cheol Kim
Shakila Parveen Asraf aliShakila Parveen Asraf ali
Shakila Parveen Asraf ali
TPThirukumaran Periyasamy
Thirukumaran Periyasamy
The escalating release of synthetic dyes from textile and allied industries has become a pressing global environmental issue due to their toxicity, persistence, and resistance to biodegradation. Among the various treatment strategies, adsorption has emerged as one of the most efficient, economical, and sustainable techniques for dye removal from aqueous environments. This review highlights recent advances in bio-derived adsorbents—particularly raw biomass powders, biochars, and activated carbons—developed from renewable waste sources such as agricultural residues, fruit peels, shells, and plant fibers. It systematically discusses adsorption mechanisms, the influence of process parameters, kinetic and thermodynamic models, and regeneration performance. Furthermore, the review emphasizes the superior adsorption efficiency and cost-effectiveness of biomass-derived carbons compared to conventional adsorbents. The integration of surface modification, magnetization, and nanocomposite formation has further enhanced dye uptake and reusability. Overall, this study underscores the potential of biomass-derived materials as sustainable alternatives for wastewater treatment and environmental remediation.

19 April 2022 in Energy & Fuels
Verified
Journal Article
Closed access
Ramkumar VanarajRamkumar Vanaraj
Ramkumar Vanaraj
RVRajangam Vinodh
Rajangam Vinodh
TPThirukumaran Periyasamy
Thirukumaran Periyasamy
SMSANTHAMOORTHY MADHAPPAN
SANTHAMOORTHY MADHAPPAN
CBCadiam Mohan Babu
Cadiam Mohan Babu
SKSeong-Cheol Kim
Seong-Cheol Kim

24 September 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Shakila Parveen Asraf aliShakila Parveen Asraf ali
Shakila Parveen Asraf ali
TPThirukumaran Periyasamy
Thirukumaran Periyasamy
Seong-Cheol KimSeong-Cheol Kim
Seong-Cheol Kim
In this paper, we describe the surface modification of polytetrafluoroethylene (PTFE) through the plasma treatment process. Several parameters including different active gases, RF power, distance between the plasma source and sample, and plasma duration were optimized to reduce the hydrophobic nature of PTFE. Three different active gases were used (i.e., N2, O2, and (Ar+H2)); N2 was effective to reduce the hydrophobicity of PTFE within a shorter plasma duration of 2 min. Several surface characterizations including ATR-FTIR, water contact angle, FE-SEM, and XPS were utilized to verify the neat and modified PTFE surface after plasma treatment. The plasma treatment using N2 as an active gas improved the wettability of the PTFE membrane, showing a water contact angle of 109.5° when compared with the neat PTFE (141.9°). The SEM images of plasma-treated PTFE showed greater modifications on the surface indicating non-uniform fiber alignment and torn fibers at several places. The obtained results confirm the fact that plasma treatment is an effective way to modify the PTFE surface without altering its bulk property.

21 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
Shakila Parveen Asraf aliShakila Parveen Asraf ali
Shakila Parveen Asraf ali
TPThirukumaran Periyasamy
Thirukumaran Periyasamy
Seong-Cheol KimSeong-Cheol Kim
Seong-Cheol Kim
JLJaewoong Lee
Jaewoong Lee
Polytetrafluoroethylene (PTFE) is prized for its unique properties in electrical applications, but its natural hydrophobicity poses challenges as it repels water and can cause electrical short circuits, shortening equipment lifespan. In this work, the mentioned issue has been tackled by using two different fluorinated compounds, such as perfluorooctanoic acid (PFOA)/perfluorooctanol (PFOL), along with plasma processing to enhance the surface hydrophilicity (water attraction) of PTFE. This method, demonstrated on Teflon membrane, quickly transformed their surfaces from hydrophobic to hydrophilic in less than 30 s. The treated films achieved a water contact angle saturation of around 80°, indicating a significant increase in water affinity. High-resolution C 1s X-ray photoelectron spectroscopy (XPS) confirmed the formation of new bonds, such as -COOH and -OH, on the surface, responsible for enhanced hydrophilicity. Extended plasma treatment led to further structural changes, evidenced by increased intensity in infrared (IR) and Raman spectra, particularly sensitive to vibrations associated with the C-F bond. Moreover, Attenuated Total Reflectance Fourier-Transform Infrared Spectroscopy (ATR-FTIR) showed the formation of surface-linked functional groups, which contributed to the improved water attraction. These findings decisively show that treatment with fluoro-compound along with plasma processing can be considered as a highly effective and rapid method for converting PTFE surfaces from hydrophobic to hydrophilic, facilitating its broader use in various electrical applications.