Z-scheme Ag2S/BiFeO3 heterojunction composites were successfully prepared through a precipitation method. The morphology and microstructure characterization demonstrate that Ag2S nanoparticles (30–50 nm) are well-decorated on the surfaces of polyhedral BiFeO3 particles (500–800 nm) to form Ag2S/BiFeO3 heterojunctions. The photocatalytic and photo-Fenton catalytic activities of the as-derived Ag2S/BiFeO3 heterojunction composites were evaluated by the degradation of methyl orange (MO) under visible-light irradiation. The photocatalytic result indicates that the Ag2S/BiFeO3 composites exhibit much improved photocatalytic activities when compared with bare Ag2S and BiFeO3. The optimum composite sample was observed to be 15% Ag2S/BiFeO3 with an Ag2S mass fraction of 15%. Furthermore, the addition of H2O2 can further enhance the dye degradation efficiency, which is due to the synergistic effects of photo- and Fenton catalysis. The results of photoelectrochemical and photoluminescence measurements suggest a greater separation of the photoexcited electron/hole pairs in the Ag2S/BiFeO3 composites. According to the active species trapping experiments, the photocatalytic and photo-Fenton catalytic mechanisms of the Ag2S/BiFeO3 composites were proposed and discussed.
Flexible capacitive pressure sensors have been widely used in electronic skin, human movement and health monitoring, and human–machine interactions. Recently, electronic textiles afford a valuable alternative to traditional capacitive pressure sensors due to their merits of flexibility, light weight, air permeability, low cost, and feasibility to fit various surfaces. The textile-based functional layers can serve as electrodes, dielectrics, and substrates, and various devices with semi-textile or all-textile structures have been well developed. This paper provides a comprehensive review of recent developments in textile-based flexible capacitive pressure sensors. The latest research progresses on textile devices with sandwich structures, yarn structures, and in-plane structures are introduced, and the influences of different device structures on performance are discussed. The applications of textile-based sensors in human wearable devices, robotic sensing, and human–machine interaction are then summarized. Finally, evolutionary trends, future directions, and challenges are highlighted.
Photovoltaic power generation is affected by weather and geographical environment, showing fluctuations and random multi-interference, and its output power is easy to change with changes in external factors. Therefore, the prediction of output power is crucial to optimize the grid-connected operation of photovoltaic power generation and reduce the impact of uncertainty. This paper proposes a hybrid model of both convolutional neural network (CNN) and long short-term memory neural network (LSTM) based on genetic algorithm (GA) optimization (GA-CNN-LSTM). First, the CNN module is used to extract the spatial features of the data, and then the LSTM module is used to extract the temporal features and nearby hidden states. Optimizing the hyperparameter weights and bias values of the LSTM training network through GA. At the initial stage, the historical data is normalized, and all features were analyzed by grey relational degree. Important features are extracted to reduce the computational complexity of the data. Then, the GA-optimized CNN-LSTM hybrid neural network model (GA-CNN-LSTM) is applied for photovoltaic power prediction experiment. The GA-CNN-LSTM model was compared with the single neural network models such as CNN and LSTM, and the CNN-LSTM hybrid neural network model without GA optimization. Under the Mean Absolute Percentage Error index, the GA-CNN-LSTM algorithm proposed in this paper reduces the error by 1.537% compared with the ordinary single neural network model, and 0.873% compared with the unoptimized CNN-LSTM hybrid neural network algorithm model. From the perspective of training and test running time, the GA-CNN-LSTM model takes a little longer than the single neural network model, but the disadvantage is not obvious. To sum up, the performance of GA-CNN-LSTM model for photovoltaic power predicting is better.
22 December 2023 in Arabian Journal for Science and Engineering