There have been some studies conducted about the single factor viscoelasticity of polymer solution or wettability effect on the micro-flow mechanism of polymer flooding. In this paper, the flow mechanism of polymer solution in dual heterogeneous reservoir considering the wettability and gravity was studied. The influences of wettability and rock particle shape on flow characteristics were studied based on the characteristics of saturation and pressure distribution. Compared with the simulation results of polymer flooding in three different rock particle shapes porous media, the oil displacement efficiency of the circular particle model is the highest at 91.57%, which is 3.34% and 11.48% higher than that in the hexagonal and diamond models, respectively. The influence of wettability was studied by the circular particle model. The oil displacement efficiency under water-wet conditions was higher than that under oil-wet conditions. The displacement process considering gravity was affected by the crossflow caused by gravity and viscous force, and the micro-oil displacement efficiency was 9.87% lower than that of non-gravity. Considering the wettability, vertical crossflow will be formed. The oil displacement efficiency under water-wet conditions was 3.9% higher than in oil-wet conditions. The research results can not only expand and enrich the micro-flow mechanism of viscoelastic polymer solution, but also provide reference and guidance for polymer flooding scheme design.

Critical issues in the development of oil fields include the differences in the layer properties as well as serious interlayer conflicts and disturbances that can lead to the formation of a preferential flow pathway. In order to understand the interlayer disturbance mechanism between the heterogeneous oil layers, mathematical models of the polymer, and oil two-phase micro-flow in porous media are established based on the Navier-Stokes equation. The phase-field method is used to track the two-phase interface during the displacement process. Then, the influences of wettability, injection modes, and permeability contrasts on the front length coefficient and the displacement efficiency are studied. The results showed that when the rock surface is water-wet (oil-wet), the polymer displaced the low (high) permeability layer first, and the interlayer breakthrough is obvious in the early stages of displacement. After the front broke through, the water-wet (oil-wet) rocks began to displace the high (low) permeability layer, and the preferential flow pathway is formed, which slowed the subsequent polymer flooding. When the rock surface is oil-wet, the perforation degree of the inlet had a greater effect on the micro-oil displacement efficiency. The micro-oil displacement efficiency of the full perforation and commingling production model is 26.21% and 37.75% higher than that of the separate-layer injection and commingling production, as well as the partial perforation and commingling production-injection models, respectively. The larger the permeability contrast, the more obvious the interlayer breakthrough. This study reveals the influence of different wettability characteristics, injection modes, and permeability contrasts on the front length coefficient and the displacement efficiency in a micro-heterogeneous model and provides an important theoretical basis for the formulation of enhanced oil recovery schemes for heterogeneous oil layers.