In this work, two elements (with two versions) compat UWB MIMO antennas are designed and fabaricted. CST software is used in the simulation process. The two elements MIMO antenna have a size of 29.5 × 60 mm2. Measured S parameters show that the MIMO antennas work well from 3 GHz up to 20 GHz (representing the maximum working frequency of the measurent instrumnts). Mesurement results show that the isolation between the antenna elemnts is higher than 23 dB for the first version of the two elements UWB MIMO antenna. In addition, mesurement results show that the isolation between the antenna elemnts is higher than 30 dB for the second version of the two elements UWB MIMO antenna. Measurements show a channel capacity loss lower than 0.4 bps/Hz and a low group delay variation.
1 January 2018 in AEU - International Journal of Electronics and Communications
The capacity and the interference statistics of the sectors of the shaped W-CDMA cell are studied. A model of five cells is used to analyze the uplink. The cells are assumed to exist in rural zones. The capacity and the interference statistics of the cell are studied using a two-slope propagation model. The expected value and the variance of the interference are given for different propagation exponent.
23 August 2021 in Wireless Personal Communications
In this article, a triple band-notched super-wideband (SWB) monopole antenna is designed and manufactured. The measured working frequency band (out of the filters working band) ranges from 2.5 to 20 GHz. A single radiating element is utilized to analyze and implement various MIMO antennas, with isolation between the antenna ports higher than 15 dB. Two parallel-fed elements SWB MIMO antenna and four parallel-fed elements SWB MIMO antennas are presented. Metallic barriers with different shapes are used to improve the isolation among ports from a low unacceptable value of 12 dB to a value higher than 20 dB within most of the working frequency band. S-parameters of the presented SWB MIMO antennas experimentally shows that antennas perform well up to 20 GHz, which is the highest frequency supported by the available Vector Network Analyzer used in the S parameters measurements. Satisfactory performance is observed up to 50 GHz by computer simulations using the CST software.
6 February 2013 in IEEE Antennas and Wireless Propagation Letters
A linearly polarized patch array with direct probe feed over substrate integrated waveguide (SIW) network (LP-PASIW) for Ku-band is presented. A double-stacked microstrip patch structure has been used as radiating elements. Internal SIW coupling patches are placed inside the SIW to obtain the desired radiation pattern. The internal coupling and external radiating patches are connected by means of copper vias. A mutual coupling model is also proposed to adjust the radiation and reflection properties of the array. An antenna prototype has been manufactured and measured. At 17.7 GHz, 16 dBi and 80% peak gain and efficiency values are obtained. Although a 10% reflection bandwidth (17-18.6 GHz) is achieved, the usable bandwidth is reduced to 3% due to array beam tilt dispersion.
20 May 2008 in IEEE Transactions on Electromagnetic Compatibility
Results of the analytical analysis to assess the effect of the ultra-wideband (UWB) emissions on the [universal mobile telecommunication system (UMTS) and code division multiple access systems (CDMA-450)] are presented. The (UMTS and CDMA- 450 systems) normalized range and normalized capacity degradation are evaluated. A free-space propagation model is used to calculate the UWB signal power that interferes with both mobile systems. It is shown that, for the case of a single UWB transmitter, the UMTS can easily tolerate UWB interference when the UWB equivalent isotropically radiated power (EIRP) is -92.5 dBm/MHz or less for a distance between the UWB transmitter and the UMTS mobile of 1 m or higher. Also, it is shown that, for the case of multi-UWB transmitters, the UMTS can easily tolerate the UWB interference when the UWB EIRP is -94.5 dBm/MHz. For the single UWB transmitter case, the CDMA-450 downlink can tolerate UWB interference when the UWB power density is in the order of -106 dBm/MHz. For the case of multi-UWB transmitters, the power density that can be tolerated by the downlink of the CDMA- 450 system is in the order of -108 dBm/MHz.