We put forward a novel method for producing ultrarelativistic high-density high-polarization positrons through a single-shot interaction of a strong laser with a tilted solid foil. In our method, the driving laser ionizes the target, and the emitted electrons are accelerated and subsequently generate abundant photons via the nonlinear Compton scattering, dominated by the laser. These photons then generate polarized positrons via the nonlinear Breit-Wheeler process, dominated by a strong self-generated quasistatic magnetic field . We find that placing the foil at an appropriate angle can result in a directional orientation of , thereby polarizing positrons. Manipulating the laser polarization direction can control the angle between the photon polarization and , significantly enhancing the positron polarization degree. Our spin-resolved quantum electrodynamics particle-in-cell simulations demonstrate that employing a laser with a peak intensity of about can obtain dense () polarized positrons with an average polarization degree of about 70% and a yield of above 0.1 nC per shot. Moreover, our method is feasible using currently available or upcoming laser facilities and robust with respect to the laser and target parameters. Such high-density high-polarization positrons hold great significance in laboratory astrophysics, high-energy physics, and new physics beyond the standard model.
High‐brilliance circularly polarized γ‐photon beams are of great significance for a wide range of applications. However, their generation through nonlinear Compton scattering must require a high‐density longitudinally‐spin‐polarized electron beam and consequently is still a great challenge. Here, a novel method is proposed to generate such γ‐photon beams via the vacuum dichroism (VD)‐assisted vacuum birefringence (VB) effect, only utilizing a well‐established unpolarized electron beam. A linearly polarized laser pulse is splitted into two subpulses with the first one colliding with a dense unpolarized electron beam to generate a linearly polarized γ‐photon beam (via nonlinear Compton scattering), which then further collides with the second subpulse and is transformed into a circularly polarized one via the VB effect. It is found that by manipulating the relative polarization of two subpulses, one can “purify” the polarization of the γ‐photon beam via the VD effect, thereby significantly enhancing the circular polarization of the γ‐photon beam. Due to the VD assistance, the VB effect reaches optimal when the relative polarization is nearly 30°, not the widely used 45° in the common VB detection methods. The numerical results show that one can obtain a circularly polarized γ‐photon beam with average degree of about 30% (43%) for energies above 500 (1000) MeV and brilliance of about 10 24 (10 23 ) photons/(s · mm 2 · mrad 2 · 0.1%BW) at 500 (1000) MeV by using a currently feasible laser with a peak intensity of about 10 22 Wcm − 2. And, it can be further improved to above 60% (75%) by increasing the laser pulse duration. Moreover, our method is shown to be robust with respect to the laser and electron beam parameters, and can also be used to efficiently confirm the well‐known VB effect itself, which has been predicted a very long time ago but has not been directly observed in experiments yet.
Kelvin–Helmholtz instability (KHI), as a fundamental physical process of fluids and plasmas, widely exists in astrophysics and physical phenomena of high energy density. In this paper, through radiation magnetohydrodynamic code, KHI is generated by the interaction between laser pulses and modulation targets in two-dimensional numerical simulations. Here, the evolution process of KHI vortices under different initial disturbance modes and with or without a horizontal external flow-direction magnetic field is investigated and compared from the perspectives of vorticity, magnetic pressure, magnetic tension, and longitudinal maximum kinetic energy. The simulation demonstrates that the external magnetic field in the horizontal flow direction inhibits the evolution of single-mode KHI vortices and the merging of multi-mode KHI vortices. The research results can provide theoretical guidance for KHI experiments using a high-energy-density laser device under a robust magnetic environment. They are also of significance to frontier research related to inertial confinement fusion.
10 October 2022 in The European Physical Journal D
The generation of high field terahertz emission based on the interaction between an ultra-intense laser and solid targets has been widely studied in recent years because of its wide potential applications in biological imaging and material science. Here, a novel scheme is proposed to enhance the terahertz emission, in which a linearly polarized laser pulse irradiates a T-type target including a longitudinal target followed by a transverse target. By using two-dimensional particle-in-cell simulations, we find that the electron beam, modulated by the direct laser acceleration via the interaction of the laser with the longitudinal solid target, plays a crucial role in enhancing the intensity of terahertz emission and controlling its spatial distribution. Compared with the single-layer target, the maximum radiated electromagnetic field’s intensity passing through the spatial probe point is enhanced by about one order of magnitude, corresponding to the terahertz emission power increasing by two orders of magnitude or so. In addition, the proposed scheme is robust with respect to the thickness and length of the target. Such a scheme may provide important theoretical and data support for the enhancement of terahertz emission efficiency based on the ultra-intense laser irradiation of solid targets.