A multi-fidelity micro combustor design approach is developed for a small-scale combined heat and power CHP system. The approach is characterised by the coupling of the developed preliminary design model using the combined method of 3D high-fidelity modelling and experimental testing. The integrated multi-physics schemes and their underlying interactions are initially provided. During the preliminary design phase, the rapid design exploration is achieved by the coupled reduced-order models, where the details of the combustion chamber layout, flow distributions, and burner geometry are defined as well as basic combustor performance. The high-fidelity modelling approach is then followed to provide insights into detailed flow and emission physics, which explores the effect of design parameters and optimises the design. The combustor is then fabricated and assembled in the MGT test bench. The experimental test is performed and indicates that the designed combustor is successfully implemented in the MGT system. The multi-physics models are then verified and validated against the test data. The details of refinement on lower-order models are given based on the insights acquired by high-fidelity methods. The shortage of conventional fossil fuels and the continued demand for energy supplies have led to the development of a micro-turbine system running renewable fuels. Numerical analysis is then carried out to assess the potential operation of biogas in terms of emission and performance. It produces less NOx emission but presents a flame stabilisation design challenge at lower methane content. The details of the strategy to address the flame stabilisation are also provided.
Electrification of small communities in districted off-grid area remains as a challenge for power generation industries. In the current study, various aspects of design of a standalone renewable power plant are examined and implemented in a case study of a rural area in Cape Town, South Africa. Estimating required electricity based on local demand profile, investment, operability, and maintenance costs of different generation technologies are studied in order to investigate their potential in an off-grid clean energy generation system. Several configurations of hybridization of solar system, wind, and micro gas turbine in combination with a battery are investigated. The Levelized Cost of Electricity (LCOE) and number of days with more than 3 h black out are compared.
As the adoption of solar hybrid systems continues to rise due to their potential to compensate for the fluctuation of solar irradiation, it becomes imperative to accurately evaluate their performance, considering the variation of off-design conditions. This paper introduces a detailed analysis method for evaluating the annual performance of a solar-MGT system under transient boundary conditions for a whole-year operation range. A hybrid system of a micro gas turbine, recuperator, and solar dish is considered, and an off-design simulation model is developed and verified with available experimental results. Two different configurations for a recuperated cycle are considered, and simulations are conducted for a test case in Pretoria, SA. The results for Jun.21 and Dec.21 as low and high solar energy days are reported with more details to compare the configurations and demonstrate the effect of ambient temperature on the heat loss of the solar receiver and the overall performance of the system. The alternative configuration reduces heat loss with a lower temperature receiver but has higher fuel consumption compared to the conventional configuration. Operating strategies for different hours of operation from 1 h to 24 h per day are simulated for 365 days, based on real meteorological data, and compared with the operating in solar available hours. It is shown that the whole-year simulation of the system considering the variation of boundary conditions can change the estimation of fuel consumption by 25 %.
Combination of both renewable and fuel-based generation systems is an advantageous approach to develop off-grid distributed power plants. This approach requires evaluation of the techno-economic potential of each source in a selected site as well as optimization of load sharing strategy between them. Development of a remote hybrid power plant in an off-grid area is the interest of this study. Defining all available combinations, characteristics of performance, cost and availability of them evaluated. Applying constraints, multi-objective target domain based on load following and Levelized Cost of Electricity is established in which by utilizing Pareto front approach, optimized scenarios is achieved.
Micro gas turbine (MGT) is a core technology in many hybrid and integrated power systems to address the low-emission future aviation and decentralization of energy generation. To achieve a high power-to-weight ratio as well as lowering the required maintenance, a new compact configuration with an air-bearing compartment was developed to build a 2 kW micro gas turbine in which designing a turbine wheel faced a multi-disciplinary problem with many inputs and constraints in aerodynamic, heat transfer, strength, and manifesting aspects. To meet all requirements of these aspects, a design procedure is proposed in this paper. Since the manufacturing process affects the performance and life of the system, several processes including casting, additive manufacturing (AM) and machining of the turbine wheel with different materials were carried out and the structural strength and performance of the components were investigated in this study. The prototype was tested experimentally to prove the performance and validate the concept. The casted wheel demonstrated both the required performance of 2 kW power output of the MGT in turbine inlet temperature of 1200 K and rotational speed of 170 krpm. However, the initial machined and additive manufactured samples for low-temperature/low-speed off-design conditions did not withstand structurally and called for a re-design.