In the present work, the influence of increasing brick scrap additions on the setting behavior and material properties of fly ash‐based geopolymers is investigated. The geopolymers produced are tested for their compressive strengths, bulk densities, and thermal conductivities, among other properties. Both the starting materials and the produced geopolymers are also investigated by infrared spectroscopy, X‐ray diffraction analysis, and scanning electron microscopy to show the relationship between the solidification behavior and the resulting material properties. The investigations show that brick scrap is very suitable as a matrix material for geopolymer production. Increasing brick scrap additions lead, among other things, to a reduction in bulk density, thermal conductivity and compressive strength.
The increasing number of new construction projects requiring high-quality building products, which, in turn, emit enormous amounts of CO2, runs counter to European and global climate goals. The increasing occupation of valuable landfill space is also an ecological problem. To meet these challenges without having to lower living standards, more ecological building materials should be used in the future. Geopolymers or alkali-activated materials, which, unlike conventional building materials, can be produced and used without a prior burning or calcination process, offer a comparatively low-CO2 alternative. Significant CO2 emissions can already be saved by using this technology. The aim of this work is to investigate whether geopolymers can also be produced from construction and demolition residuals generated by the construction industry in order to counteract the problem of the increasing use of landfill space and, at the same time, to further reduce greenhouse gas emissions in the production of building materials. For this purpose, various residual materials from the construction and demolition industry are investigated by means of XRF, XRD, and IR spectroscopy for their setting behavior by alkaline activation. At the same time, the characteristic values of compressive strength, flexural strength, bulk density, and thermal conductivity, which are important for building materials, are determined in order to test the possible applications of the resulting materials as building materials.
Sustainability is becoming an increasingly important factor in the development of new building materials. In terms of the sustainability of concrete components, the biggest challenge is the high energy consumption and associated greenhouse gas emissions in the production of Portland cement. A common strategy used by the construction industry to improve sustainability is to use residuals to develop lower‐emission geopolymer concretes that eliminate high‐emission cement‐based concretes. Because construction and demolition waste, at 3 trillion tons per year worldwide, also represents an environmental risk, this work will investigate the suitability of geopolymers based on real construction waste. In the course of the investigations, the manufactured geopolymer samples are examined for the material parameters relevant to building materials, namely compressive strength, flexural strength, raw density, total porosity, and thermal conductivity. The setting behavior and the forming structures are investigated by infrared spectroscopy, X‐ray diffraction analysis and scanning electron microscopy. The present study is intended to contribute to the development of a suitable recycling strategy for the material recycling of construction waste in novel geopolymer material.
Die vorliegende Arbeit beschäftigt sich mit der Herstellung von Geopolymeren aus Ziegelmehl und Mischbauschutt mithilfe einer alkalischen Aktivator‐Lösung. Die Studie hat zum Ziel, zu untersuchen, ob sich diese Geopolymere mehrfach reaktivieren lassen, ohne neues Ausgangsmaterial hinzufügen zu müssen, und wie sich die Anzahl der Reaktivierungen auf die Struktur und die werkstofftechnischen Eigenschaften auswirkt. Die Ergebnisse zeigen, dass Geopolymere aus einer Mischung aus Ziegelmehl und Mischbauschutt hergestellt werden können und sich bis zu drei Mal aufmahlen und reaktivieren lassen.